Question about Audio Players & Recorders
a 6ya Technician can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Technician (only for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: Altec Lansing ada745 fuse
Yes, it's a 1A 250V glass fuse, 0.75" (1.9cm) long. The only other number on the fuse is "239", if that means anything. You take it out by putting a flat screwdriver in the slot on the fuse holder cap, turn counter-clockwise, and pull out once it releases.
Posted on Nov 20, 2008
Hello. I figured it out. You probably have a computer that only has one AUDIO OUT jack or headphone jack. Take the wire with the green plugs (1/4") and put one end in the AUX jack on the front of the Altec subwoofer and the other in your audio out or headphone jack. After turning on the power switch on the back of the Altec subwoofer, you'll see the green indicator light next to the AUX jack on the subwoofer blink and then come on steadily. YOU MUST HIT THE AUX BUTTON on the remote control, or you won't hear anything. (Make sure your PC's audio is set to line out, if it doesn't recognize the speakers automatically.) This is the same way you hook up an MP3 player or portable CD player, etc.
Posted on Feb 14, 2009
SOURCE: can i connect altec lansing
If your TV has a variable audio output, yes.
Plug them in directly to a compatible 3.5 mm output or adapt an RCA audio output to 3.5mm with a connector available at any electronics store like radio Shack.
In your TV audio menu select "variable" for the audio out. Otherwise they'll always be at maximum volume.
Posted on May 21, 2011
I've managed to fix the amp in the ADA995 when I blew the rear channel amp. There is a design fault with the voltage regulator that causes it to run very hot, which frys the plastic housing glued near it, which corrodes the circuit board trace.
Getting the sub/amp apart is a *****. But doable. You need to not only remove the screws in the back under the flat grills, but ALSO 3 screws behind the top speaker that also hold the amp in place. And getting the power supply out is another rather difficult procedure, which is needed if you want to run the amp on the bench to troubleshoot.
The amp chips are available, though no NTE equivalent, and replaceable.
Posted on Apr 22, 2012
Tips for a great answer:
Oct 13, 2017 | Audio Players & Recorders
Mar 25, 2016 | Altec Lansing Audio Players & Recorders
Mar 09, 2015 | Altec Lansing Audio Players & Recorders
Mar 01, 2013 | Altec Lansing ADA 885 Computer Speakers
Jun 12, 2012 | Altec Lansing ATP 3W Computer Speakers
Apr 09, 2011 | Altec Lansing ADA745 4 Speakers
Apr 03, 2011 | Altec Lansing VS2421 Main / Stereo Speaker
Mar 14, 2009 | Altec Lansing ACS 295 Computer Speakers
Nov 23, 2007 | Altec Lansing 621 Computer Speakers
1,546 people viewed this question
Usually answered in minutes!