Registration ERROR 10014 - NComputing X300 3 User Expansion Kit Graphic Card

Advanced Computer User Solution (manual restore):
1) Start your computer and log on as an administrator.
2) Click the Start button then select All Programs, Accessories, System Tools, and then click System Restore.
3) In the new window, select "Restore my computer to an earlier time" option and then click Next.
4) Select the most recent system restore point from the "On this list, click a restore point" list, and then click Next.
5) Click Next on the confirmation window.
6) Restarts the computer when the restoration is finished.
Novice Computer User Solution (completely automated):
1) Download (Error 10014) repair utility.
2) Install program and click Scan button.
3) Click the Fix Errors button when scan is completed.
4) Restart your computer

NSIC (National Small Industries Corporation) is a government enterprise under the supervision of Ministry of micro, small and medium enterprises (MSME). It has been constituted to promote and help the MSME industry by proposing many schemes such as single point registration of government purchase, marketing support and more. It helps MSME business players to grow their business and market effectively.

https://www.gsbtaxation.com/in/nsic-registration-consultants-in-mumbai

It means your device is locked from registration by Amazon. Either it's considered stolen or a return in transit. You will need to call amazon customer service and have then connect to echo team. That's how I had it resolved. I had a return that I decided to keep - but when initially requested a return, it was deactivated by them.

That error indicates that the paper was not sensed as passing the pob sensor which is right at the registration rollers. If the paper is folding there, the main cause is the registration clutch not being initialized or slipping. Replace registration clutch, part number: 121K22220

http://www.iteminconline.com/121k22220_121k22220-xerox-7760-registration-clutch.htm

Registration error. have a tech come out clean, run registration test /gradation and clean registration assy.

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/normanj_7893313f0751935f

Registration Error 3
When a color registration error is detected with coarse
adjustment, or with the main-scan line adjustment.
PU firmware does not notify this warning to CU firmware
at the time of Shipping Mode. Therefore, this status
does not occur in a user environment.
n
2 = Yellow
3 = Magenta
4 = Cyan

Dens Shutter Error 2
DENS SHUTTER ERR
Check 3: Check to see whether the sensor shutter opens and closes normally, by the
MOTOR & CLUTCH TEST of the self-diagnostic function. If the shutter operates
imperfectly, replace the shutter unit.

registration activation error 0015 111 after

registration activation error 0015 111 after installing revit architecture 2013 on window 8 pls help urgently

According to the HP Service manual, there is no 54.18 error.

The listed errors are:


54.1 Temperature error
Check the fuser. See 50.X fuser error.
54.3 Image density sensor error
Check the connections. Replace the color registration detection assembly.
54.5 Colour registration sensor error
Check the connections. Replace the color registration detection assembly.
54.6 Image density error
Check the connections. Replace the color registration detection assembly.
54.7(Y), 54.8(M), 54.9(C), or 54.10(K) Drum phase sensor error
Check the connections. Replace the drum phase sensor for the indicated color.
54.11(K), 54.12(C), 54.13(M), or 54.14(Y) Toner sensor error
Check the connections. Check the cartridge and replace it if necessary.
Replace the color registration detection assembly.
54.19 Transfer Belt error
Check the ETB connection. Replace the ETB. Replace the DC controller.

It is most likely that you have a faulty Toner Cartridge.

This error occured when -

The home position cannot be detected after the horizontal registration signal has been sent.

because -

1.The horizontal registration sensor (PS10) has a fault
2. The Horizontal registration motor (M9) has a fault.
3. The DC controller pcb has a fault.

To solve first check sensor & motor

Are you getting registration errors or are you getting registry errors . If you are getting registration errors then you can call up the microsoft activation helpline and they would guide you through the registration process. if you are talking about registry errors then its something about the hard drive being faulty. so try to do a format reinstall. If you need more detailed help. write back. Thanks Ashish.