Question about Sanyo DS13204 TV

2 Answers

Can't switch from aux to video.

Hello, I am having difficulty with switching my Sanyo television from aux to video. I have a universal remote and when I hit the input but, info about the channel pops up. Is there a way to switch to video from an RCA remote or can I do it manually?

Posted by on

  • kad7 Nov 29, 2008

    i cannot switch my sanyo tv to av mode

    because i lost my remote control, i bought an universal remote but it is not

    working

×

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 19 Answers

The universal remote will not work because there has to be an input button on it.

Posted on Apr 23, 2009

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

I had the same problem... if u are using a universal remote then check the program codes and try all of them to see which one makes the input button to go to video. i have a sanyo tv so i tried all of the codes for sanyo and one of them worked!

Posted on Jan 24, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

I have a small Sanyo television hooked up to a dvd player for my daughter....problem is I can't get it to go to the AUX channel. Don't have the remote that went with it, but do have a Sanyo FXMG...


Hello
Your sanyo TV has no menu button on its front panel control. Without its original remote, it is immpossible to get ito its AUX. OK.

Jun 13, 2011 | Sanyo DS13204 TV

1 Answer

How do i program a universal remote to my sanyo t.v without the t.v code


Hello
Three digit universal remote code for Sanyo are:-

004/ 013/ 049/ 108/ 110/ 180/ 209

Four digit universal remote code for Sanyo are:-

0049 0097 0110 0004 0268 0012 0108 0180

Try each code after switch the TV Off by its power switch and switch it On again until you find the suitable code for your TV, keep that number safe for further use.

Direct Code Entry
  1. Press and hold the SETUP button until the red indicator stays on, then release the SETUP button.
  2. Press and release the desired Mode button (TV, VCR, etc.). The red indicator blinks, then stays lit.
  3. Enter the 4 digit code from the code tables. Note: after a valid code entry, the red indicator turns off. For an invalid code, the red indicator flashes.
  4. With your device on, press CHANNEL UP. If the device responds, no further programming is required. Note: If some buttons do not operate your device, try one of the other codes for your brand.
OK.

Dec 12, 2010 | Sanyo DS31520 31" TV

2 Answers

Can you switch from tv to video input on sanyo ds31520 tv without a remote


no you require the remote or a universal remote or sometimes a cable remote that has been programmed to work the volume on the tv set will have an input button .

Sep 29, 2009 | Sanyo DS31520 31" TV

2 Answers

Sanyo ds 27510 tv no remote want to setup my tv with an antennea,wont switch from video 2


If it has a MENU button, press it and use the volume up and down to manipulate the choices, press menu again when you get to channel setup. you want AIR if using off air or Cable for cable. Next screen should say start and press menu again, the channels will start to cycle. If htat doesnt do it, you have a new model than the one I just did tonight. OneForall remotes will probably not have the setup button you need to autoprogram. Best bet is to find a Sanyo made universal remote or other Sanyo remote on Ebay as alot of the buttons are proprietary to manufacturer. Some TV's are useless without their own remote if not on a external tuner (cable SAT or digital)

May 13, 2009 | Sanyo DS27510 27" TV

1 Answer

I can't switch to aux/video without my remote.


not really sure about this but if you put a disk in then run auto scan for your channels,long shot but worth a try.

May 11, 2009 | Sanyo DS19310 19" TV

1 Answer

TV stuck on Video


I had this problem, I replaced the remote and it works now

Feb 27, 2009 | Sanyo DS31590 31" TV

1 Answer

How do i switch to my av mode without a remote


try going to channel 00, or look for the "aux" or "input" button on the tv. if anything you can get a universal remote control.

Sep 15, 2008 | Sanyo DS13204 TV

2 Answers

Sanyo MTS TV


Hello
Most universal remotes should have a TV/Video button. Look carefully on the remote. Or get another brand remote.

Also depending on your Sanyo model there may be a TV/Video switch on the front of the set. Look for a possible small cover along the bottom.

Feb 26, 2008 | Standard (CRT) Televisions

1 Answer

AUX mode


Try to disconnect power for at least one day.

good luck---------tomtaso

Nov 04, 2007 | Zenith B32A24Z 32" TV

Not finding what you are looking for?
Sanyo DS13204 TV Logo

Related Topics:

519 people viewed this question

Ask a Question

Usually answered in minutes!

Top Sanyo Standard (CRT) Televisions Experts

The Knight
The Knight

Level 3 Expert

68352 Answers

matt martin
matt martin

Level 3 Expert

1191 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Are you a Sanyo Standard (CRT) Television Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...