Question about Toshiba e-Studio 350 Copier

2 Answers

I HAVE THIS CODE HOW TO RESET

C440 ESTUDIO 350

Posted by on

2 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Toshiba Expert
  • 414 Answers

If 1st time occur, u can just go to 08-400, reset the value to "0" then restart the machine.






When this code not cleat 08-400 then check these all thengs..
1.Check the thermistors
(1) Check if the connectors are disconnected.
(2) Check if the main and edge thermistors are in contact with the surface of the fuser roller properly?
(3) Check if the harnesses of the main and edge thermistors are open circuited.


2. Check the IH board and IH coil


(1) Check if the IH coil is broken.
(2) Check if the connector of the IH coil is disconnected.
(3) Check if the thermostat is blown.
(4) Check if the connectors on the IH board are disconnected (AC input connector and LGC I/F connector
CN455/456).
(5) Check if the IH board or the switching power supply unit are abnormal.
• Replace the IH control board.


3. Check the LGC board
(1) Check if the connectors CN316 are disconnected.
(2) Check if the conductor pattern on the LGC board is short circuited or open circuited.
(3) Replace the LGC board.

Thanks
Best Regards

Posted on Aug 30, 2012

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Renaissance:

    An user who is expert in 3 categories / brands.

  • Toshiba Master
  • 1,346 Answers

C440:HIGH FUSER TEMPERATURE, OR LOW FUSER TEMPERATURE

Replace the Thermistor in fuser unit

Posted on Aug 25, 2008

1 Suggested Answer

fivemayur
  • 414 Answers

SOURCE: I have a Toshiba 350 copier ans it has a error code c440

If 1st time occur, u can just go to 08-400, reset the value to "0" then restart the machine.



When this code not cleat 08-400 then check these all thengs..
1.Check the thermistors
(1) Check if the connectors are disconnected.
(2) Check if the main and edge thermistors are in contact with the surface of the fuser roller properly?
(3) Check if the harnesses of the main and edge thermistors are open circuited.

2. Check the IH board and IH coil

(1) Check if the IH coil is broken.
(2) Check if the connector of the IH coil is disconnected.
(3) Check if the thermostat is blown.
(4) Check if the connectors on the IH board are disconnected (AC input connector and LGC I/F connector
CN455/456).
(5) Check if the IH board or the switching power supply unit are abnormal.
• Replace the IH control board.

3. Check the LGC board
(1) Check if the connectors CN316 are disconnected.
(2) Check if the conductor pattern on the LGC board is short circuited or open circuited.
(3) Replace the LGC board.
please vote me.
Thanks
Best Regards



Posted on Aug 23, 2012

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to ikj adjust estudio 350How to ikj adjust estudio 350How to ikj adjust estudio 350How to ikj adjust estudio 350How to ikj adjust estudio 350How to ikj adjust estudio 350How to ikj adjust estudio 350


If wait warming is occur on the panel, and it wouldn't change to ready, then fuser unit is the cause. Need to check the themistor and themostat on fuser unit.

Feb 15, 2014 | Toshiba e-Studio 350 Copier

5 Answers

TOSHIBA E-STUDIO 452 showing error code C440 problem solutions


How con i INCREASE , color of copy in toshiba 452
please sent to my add the GUIDE code toshiba 452
oolmii@yahoo.com

Aug 12, 2012 | Toshiba Estudio 200L Copier

1 Answer

I have a Toshiba 350 copier ans it has a error code c440


If 1st time occur, u can just go to 08-400, reset the value to "0" then restart the machine.



When this code not cleat 08-400 then check these all thengs..
1.Check the thermistors
(1) Check if the connectors are disconnected.
(2) Check if the main and edge thermistors are in contact with the surface of the fuser roller properly?
(3) Check if the harnesses of the main and edge thermistors are open circuited.

2. Check the IH board and IH coil

(1) Check if the IH coil is broken.
(2) Check if the connector of the IH coil is disconnected.
(3) Check if the thermostat is blown.
(4) Check if the connectors on the IH board are disconnected (AC input connector and LGC I/F connector
CN455/456).
(5) Check if the IH board or the switching power supply unit are abnormal.
• Replace the IH control board.

3. Check the LGC board
(1) Check if the connectors CN316 are disconnected.
(2) Check if the conductor pattern on the LGC board is short circuited or open circuited.
(3) Replace the LGC board.
please vote me.
Thanks
Best Regards



Mar 07, 2012 | Toshiba e-Studio 350 Copier

1 Answer

How to fix c440 errror?


it is a fault on your heater unit. normally it is the theroster that has gone bad. you will have to get a technition to check the heater and replace the relevant parts. i can tell you how to reset the code, but if the part is still faulty, it can damage your machine even further, escalating the cost.

Jan 20, 2011 | Toshiba Estudio 200L Copier

2 Answers

I have an estudio 350 that I need to reset after a "time periodic maintenance". How do I reset?


THIS MESSAGE APPEAR BECAUSE THE PM COUNTER IS THE SAME OR LESS THAN THE COUNTER OF PM'S UNITS (YOU CAN SEE THIS COUNTER ON THE 08 252).
YOU HAVE TO DO THE PM TO MACHINE. HOWEVER YOU CAN DO THIS STEPS TOO:

1.- TURNS ON THE COPIER HOLDING 08 KEYS
2.- ENTER 251 CODE AND PRESS START KEY
3.- ERASES THE NUMBER THAT SHOW AND PUT 0

Dec 09, 2010 | Toshiba e-Studio 350 Copier

1 Answer

I need a reset code for maintances on a toshiba estudio 350


Hi how are you this is jack... jack_pak@hotmail.com

Dear you need PM maintances code..
ON the machine 08 mode and change the 251 value.
Change or Zero. ok .Then you change This value your copier finished Maintenance Indecation.
PLEASE VOTE ME.
Thanks.
Best Regards,

Aug 14, 2010 | Toshiba e-Studio 350 Copier

4 Answers

TOSHIBA E STUDIO 280 CALL FOR SERVICE


First of all check what is sub code with this .if it is not showing code press clear & 8 key at same time .code will bi shown .if no code just reset pm cycle count.MIAN AKHLAQ

Dec 31, 2008 | Toshiba e-Studio 350 Copier

2 Answers

Reset fax data in toshiba estudio 350/450


how do I find my IP address for my Toshiba e-studio350

Nov 30, 2008 | Toshiba e-Studio 350 Copier

Not finding what you are looking for?
Toshiba e-Studio 350 Copier Logo

937 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toshiba Printers & Copiers Experts

pkwc

Level 2 Expert

254 Answers

Anthony Chiang
Anthony Chiang

Level 3 Expert

524 Answers

Michel Smith

Level 3 Expert

1218 Answers

Are you a Toshiba Printer and Copier Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...