Dark pictures My pictures are too dark. What can be wrong?

The LED driver is probably at fault. TV Parts Universal TV Stands DLP Chips ShopJimmy You can get parts here.

It's been a while since I used a mamilla 645, so forgive me if this is wrong, but I seem to remember the dark slide would only come out with the camera wound on, ready to take a picture.

it could be bad light.make sure there is proper lighting.this would improve the picture quality

there are 2 mirrors did you clean both there is one down in front near the light source when front screen removed lean in and look down there is another smaller mirrorclean it

Your TV has a bad light tunnel. This part is inside the light engine. A qualified tech will have to replace it, but the part is available. Once it is replaced the TV will be as goog as new. Please take time to rate this solution and let me know if I can be of further assistance

did you change the lamp with an original or bulb only - mitsubishi only sells the lamp and housing!!!
never use generic

Check whether the ISO rating set in the camera is correct. Also, if the images are grainy and dark, it may be an issue with the exposure.

sony had a recall on this set see if this is one of yours
http://esupport.sony.com/perl/news-item.pl?news_id=24

Be sure that you are capturing images in the right shooting mode. For example, if shooting a night scene your image will be underexposed and dark if the image is captured in the Program Auto mode for regular photography, or in any mode other than Night Scene. Be careful that when capturing images, nothing is obstructing the flash.

Be sure that you are capturing images in the right shooting mode. For example, if shooting a night scene your image will be underexposed and dark if the image is captured in the Program Auto mode for regular photography, or in any mode other than Night Scene. Be careful that when capturing images, nothing is obstructing the flash.