Question about Fisher and Paykel GWL11 Top Load Washer

4 Answers

Looking for parts to replace hose. Fisher Paykel GWL11

Cindi was washing some pillows and one got caught around the top of the barrel. The friction melted or burned the soft rubber filler tube. It will need to be replaced. Has anyone had any luck in finding a parts diagram that identifies the part and #'s. I would like to repair it myself but need #'s to order. Thanks!! Buzz jrgordo100@comcast.net

Posted by on

  • robins78 Nov 29, 2008

    My wife also washed a pillow which melted this same piece, I have the hose off and ready to replace (very easily) I just need the part number. ANY HELP?

×

4 Answers

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 6 Answers

Google search Fisher Paykel part #425974 or 425974P. One of the first sites you'll see is the Sears Parts-Direct, and you'll see the little yellow rubber hose for around $6.99. After that you check out and add shipping. Saves money over the approximately $40 at Fisher & Paykel's part website, where they force you to buy the yellow hose plus another assembly you don't need, just to get the little "elbow nozzle." Here's a link, but who knows how long it will stay current . . . http://www.searspartsdirect.com/partsdirect/partsdirect/showPart.pd?partNumber=425974&productGroupId=0026&supplierId=426

Posted on Jul 11, 2010

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

The part can be ordered from Fisher Paykel website http://www.fisherpaykelparts.net/ecart/item.php?item_id=339 The cost with shipping for me was 33.95. Part is easy to replace you don't need to call A and E factory service who told me it'd be about 150.00 to have them replace it.

To replace it, take control panel off washer. Take front screws off so you can tip the top back. Once control panel is off take the hoses off and remove the phillips screws out by the hose in;ets. The water tank then lifts out and the hose pops out.

I'm not a repair man and it took me a 1/2 hour to replace the hose myself.

Posted on May 11, 2009

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Part #425974 ELBOW NOZZLE SD3
found at http://www.stokes-aus.com.au/StokesAP/Manufacturer_Info/FP/WASHERS_DRYERS/517751%20Washers%20Ph%206%20MW511,MWC11,GW511,611,711,IW511,711,811.pdf

Posted on Nov 29, 2008

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 639 Answers

Dear friend,
ngfam at you service!



You can not fix this problem your self!!!

This sounds like it will only fixed by service then you will be happy again!!

Yes sounds like you need service!
Call A&E Factory Service /They service nation wide
And are available 24/7 for making appointments!

If the appliance is 10 years old or more,it may make sense not to invest any money to fix it!
BUY SPEED QUEEN NEXT TIME AND HAVE IT FOR 25 YEARS! THAT'S WHAT I HAVE!
Happy to assist you,
PS. PLEASE GIVE ME A GOOD RATING BEFORE YOU SIGN OFF!

Posted on Aug 26, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Why does it leak, even when machine is not running?


Small leak/drip with Fisher & Paykel GWL11 Washer (with ...

ths.gardenweb.com > Home Forums > Laundry Room
May 6, 2008 - Got a small drip/leak with my GWL11 washer..... The washer is ...Small leak/drip with Fisher & Paykel GWL11 Washer (with pictures) ..... New project for a new year: Light a fire under plans for an outdoor oven and claim the best pizza in town ... Speed Queen Front Load AFN50 Washer Review - Long Post.

Fisher and Paykel GWL11 Top Loading Washer

ths.gardenweb.com > Home Forums > Laundry Room
Mar 5, 2008 - My GWL11 Top loading washer has had nothing but problems! ... I have a Fisher Paykel GWL11 that I purchased new and have loved until this problem started. ... The machine fills with a small amount of water to saturate the clothes ...... Fault 36 is related to water leaking, but is *not* the kind of leaking from ...

Fisher and Paykel GWL11 Top Load Washer - faqqq

www.faqqq.com/.../fisher-paykel-gwl11-washer-leaking-and-squealing-fish...
Question Product: Fisher and Paykel GWL11 Top Load Washer Question Details:Fisher Paykel ... Small leak/drip with Fisher & Paykel GWL11 Washer (with .

Dec 12, 2015 | Fisher and Paykel GWL11 Top Load Washer

1 Answer

My Fisher & Paykel GWL11 top load wahser will only wash in cold after the first cycle. It


the problem other then the thermosat and solenoid valves is probably the main board. to check you need to replace the board with known good second hand board . buy an old machine for parts

Nov 19, 2011 | Fisher and Paykel GWL11 Top Load Washer

1 Answer

The waste hose is to short, wondering if there is a replcement part and if so, how to replace it?


Hi just read your posting.No need to replace complete hose.If you ring your Local FISHER@PAYKEL SPARE PARTS DISTRIBUTOR they will probably have an extension hose or kit available.Or you can try your local hardware store for a GRAY WATER HOSE which will extend your drain hose quite a bit.Hope this helps and please reply for further assistance.

Aug 09, 2010 | Fisher and Paykel GWL11 Top Load Washer

2 Answers

GWL11 fails to drain


I had the same problem. After bailing out the water, I tipped the machine and saw a knee high panty hose caught up in the fan on the bottom. I removed that, checked to make sure the fan could spin freely, and viola! problem solved!

Jun 20, 2009 | Fisher and Paykel GWL11 Top Load Washer

1 Answer

Fisher Paykel Washer Hose


THIS IS YOUR RECIRCULATION HOSE.CONTACT YOUR NEAREST FISHER AND PAYKEL SERVICER FOR PARTS.

Mar 27, 2009 | Fisher Paykel EcoSmart GWL15

1 Answer

Fisher Paykel GWL11 Cold Water Not Flowing


you can swap the hot and cold valves over and see if this fixes the problem as it sound like your cold valve is faulty but not the hot valve.

Cheers

Mar 24, 2009 | Fisher and Paykel GWL11 Top Load Washer

1 Answer

Fisher Paykel GWL11 Top Loader Washer


Please dont put any more money into this machine,if you wait long enough it will take alot more than a penny. 

May 11, 2008 | Fisher and Paykel GWL11 Top Load Washer

1 Answer

Need to replace drain hose


there is a kit available to replace just the part from the back of the machine.normally the drain hose comes with the wiring loom big job.not sure what country you are in.kit is available in australia.

Nov 15, 2007 | Fisher and Paykel GWL11 Top Load Washer

1 Answer

Changing the drain hose


Try: http://usa.fisherpaykel.com/global/customer-care/trouble-shooting/washing-machines.cfm?CFID=5795181&CFTOKEN=46306735

Nov 29, 2006 | Fisher and Paykel GWL11 Top Load Washer

Not finding what you are looking for?
Fisher and Paykel GWL11 Top Load Washer Logo

805 people viewed this question

Ask a Question

Usually answered in minutes!

Top Fisher and Paykel Washing Machines Experts

Richard Roth
Richard Roth

Level 3 Expert

9472 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Dan Webster
Dan Webster

Level 3 Expert

8147 Answers

Are you a Fisher and Paykel Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...