Question about Sony KV-27FV16 TV

Open Question

A dog chewed up the power cord on my Trinitron TV model KV-27FV16. Is it possible to get and install a replacement myself?

Posted by on

Ad

5 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad
  • 579 Answers

SOURCE: blank screen on sony trinitron tv

The problem with this model is the large parts due to poor wave soldering. Locate the transistor Q605. Using a small wattage soldering iron melt the solder and add a little solder to all the large parts in the area. Small wattage = 15 to 30 watt. Stay away from the surface mounts they are not the problem. I resoldered the following: D647
Q605 C690 D645 D620 R691 Q691
These parts are located on the main board, the one the power cord connects to. Carefully press the clip on the left side of the board (as you look at it from the rear of the tv) carefully pull the main board back and out of the rails. You will find the parts on the right side of the main board about 2 inches over 2 inches down.

Posted on Dec 31, 2007

Ad
  • 4234 Answers

SOURCE: Sony Trinitron Picture Tube replacement

I think that you will find the picture tube to be more expensive than a replacement TV, if it is still available (unlikely). That being said, it is also unlikely that the tube itself is the problem, The more common problem is the horizontal output transistor or the flyback transformer. Either part should still be available for a reasonable cost. Check with a local servicer for the part numbers and costs. These are common parts.

Dan

Posted on May 19, 2009

Karthik316
  • 187 Answers

SOURCE: Sony Trinitron TV - Keeps Blinking

Hi,
Try this link
http://www.agoraquest.com/searchbb.php?addterms=all&forum=all&sortby=p.post_time&submit=1&term=trinitron%20blinking%20picture
pls rate my suggestion....

Posted on Jun 23, 2009

  • 17 Answers

SOURCE: Sony FD TRinitron WEGA,

Just went thru the same problem with my sony kv-34. There are two IC's on the D circut board located on the left side looking from the rear. If you can solder 18 pin IC's without making a mess it is possible.If you have a friend thats real good with a pencil tip solder device. I recomend putting sockets in where the IC's were as you won't have to worry about overheating stuff next to the IC's.Do a google search: Sony led flashes ad select the second hit in the list.

Good luck
Rich

Posted on Jun 06, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Dog chewed cord on bissell model 6579-2 how do I replace it?


You can cut the bad section of wire out of the cord, cut the insulation on the cord to get to the wires. Match your colors, strip the insulation from the individual wires and twist together. Wrap each wire with electrical tape (making sure no wire is exposed, can be a fire hazard), then wrap the cord with electrical tape. The cord will be a little shorter, but should work fine.

Jun 16, 2009 | Vacuums

1 Answer

Sony Triniton not powering on


If the lights don't come on the tv ,try to connect the tv to the other power point
and check if it powers on, if its does not power on then its the problem with
fuse inside the tv replace the fuse and check its works ...and also test the power chord for continuity ..

Good luck...

Feb 18, 2009 | Sony KV-27FV16 TV

1 Answer

Sony KV-27FV16 no sound


Try going into the audio settings part in your menu and select reset audio settings.

May 16, 2008 | Sony KV-27FV16 TV

1 Answer

No sound or picture


Hello,
I'm not sure if you solved your technical issue or not, but if your TV is still broken, I would be interested in buying the door that covers the AV inputs. This door is on the front of the TV. Unfortunately, mine broke, and it's been difficult to find a replacement. If you are interested, I can be reached at (612) 801-5752 or by email at tremely@mac.com. Thanks.

Apr 07, 2007 | Sony KV-27FV16 TV

1 Answer

Please Help


call a tech your tv needs to to be repaired the problem is in the power supply and related circuit.good luck.

Apr 07, 2007 | Sony KV-27FV16 TV

1 Answer

Please Help


Is the red light flashing a code ? exaple 4 blinks pause 4 blinks ?

Apr 07, 2007 | Sony KV-27FV16 TV

1 Answer

Sony 27"TV will not turn on


The picture tube on your tv is dead, you need to replace it. It probably will be worthing just purchasing a new set, because the cost of repairing it will be close to the purchase of a new one.

Apr 07, 2007 | Sony KV-27FV16 TV

1 Answer

No sound or picture now


The set may have shorted the horizontal out put transistor since it kept coming on sometimes. This could be cause by the driver transformer arcing causing a "spike" in voltage going to you horizoltal out put transistor. Stargazer

Mar 31, 2007 | Sony KV-27FV16 TV

1 Answer

No picture just clicking sound


with your model number manny have a defective flyback part number is 1-453-310-11

regards,
daniel.

Mar 31, 2007 | Sony KV-27FV16 TV

1 Answer

TV solution


You may have a bad solder joint on the horizontal driver transformer or somewhere else in the set. I found this problem with this transformer several times. Stargazer

Mar 31, 2007 | Sony KV-27FV16 TV

Not finding what you are looking for?
Sony KV-27FV16 TV Logo

Related Topics:

33 people viewed this question

Ask a Question

Usually answered in minutes!

Top Sony Televison & Video Experts

The Knight
The Knight

Level 3 Expert

76099 Answers

Jerry Greenberg
Jerry Greenberg

Level 3 Expert

1691 Answers

Steve Allison
Steve Allison

Level 3 Expert

5569 Answers

Are you a Sony Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...