Question about Compaq Computers & Internet

1 Answer

Need to replace screen on presario r4000. do I remove bezel and 'POP' screen out ? is it that easy? thanks Ty

Posted by on

  • tyrjames3 Aug 30, 2008

    Hi,

    regardsd screen replacement, stripped in 10 mins' replaced in 20 mins' screen cost £80, if I charged for an hour of my time that would be £15 .

    Total £95 for a £250 quoted job!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

    Don't believe all you read...................

    Ty

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 42 Answers

It's not safe to do that alone.
It's LCD, you must not touch it.

It's impossible to replace alone.
If your laptop still under warranty, send back to the warranty.
They will replace it for it.

If not, send to any computer shop, they will know how to repair it.
LCD is different with a normal monitor, you shouldn't touch anything on it. It's very sensitive.


Posted on Aug 24, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

OPEN CASE


Normally the front bezel has little catches that it attaches to the metal frame that you can see after you remove the outer case. Just look down the side near the bezel after you remove the case and apply a little pressure to release the catches that hold it in place.

Mar 18, 2012 | Compaq Presario 7AP140 (199063-003) PC...

1 Answer

How do I take out the screen on my HP G71 -329WM laptop


I have a HP Pavilion zv6000 laptop and have replaced both the screen and the hinges, plus a few friends laptop screens all the same way. First remove the battery and unplug the laptop. To replace the screen you will need to to remove the hard drive and remove all the screws form the underside of the laptop to allow access to the underside of the keyboard as the connectors for the screen are under the bezel above the keyboard. Opening the lid all the way will make it easier to get under the keyboard t and bezel then disconnect the power, video signal, and wifi connectors. Might be 1 or 2 or 3 separate connectors. Carefully removed the rubber plugs from the front of the screen and stored them so you didn't loose them. Using a small screwdriver, remove the screws under the plugs. Using a flat screwdriver or small thin blade, carefully separate the bezel around the outside of the screen, it may be glued together so take care not to crack the plastic. At this point would can see the screen screwed in to the hinges and the back of the lid and what screws need to be removed. The wifi antenna is usually attached to both the screen and the lid via tape so take care when removing the screen. Place the new screen back and attach the hinges and connectors, making sure to place the wifi antenna back where it was located properly. At this point I plug in the laptop and verify the HP logo or POST screen appears whe I turn it on, showing that the connections are ok before unplugging and continuing to replace the remaining screws, hard drive and finally battery. Depending on how the bezel around the screen is attached, you might want to use double stick tape as the glue no longer holds the front and back together around the screen. Depending on how mechanical you are, figure between 30 and 60 minutes to replace the screen the first time.

Dec 03, 2010 | Computers & Internet

1 Answer

I need to replace the screen on a Packard Bell Easynote TJ65, and I can't get the top cover off to get access to the hinges. I've managed to release the top cover on the front and sides, but the back edge...


Have you removed all of the screws from the bezel all the way around the screen - looking at the picture of the laptop there should be six screws one in each corner and two more across the top, left and right of the web cam.

Get the whole bezel loose so you can bend it down and see what is holding the bezel in place, sometimes you have to be firm in pulling the bezel away from the top plastic (back of the screen) if you bend it forwards you should be able to see what is holding it in place - good luck

Jun 30, 2010 | Computers & Internet

1 Answer

How do I remove the optical drive from an Acer6900. I slide the green slider to the rear and the drive will slide back about an inch. It will move no further. I can't see any obstruction, but something...


You may need to remove the front bezel before taking the drive from the bay. there are screws that latch the drive into place, and they are likely hitting the bezel on the way out. Most bezels pop off easily. You should consult Acer tech support for details.

Oct 01, 2009 | Acer Veriton 6900 PC Desktop

1 Answer

I need to replace my ide drive on my compaq presario 5000 but i cant seem to locate it could you help me out?


HI,

ON the 5000 series there are two possibly three ide drives on the machine. Once you have the front bezel off, and the remove the side panel, you will find near the top of the machine the ide cdrom drive, and possible another cdrom or tape backup ide drive. Below those one or two drives is your hard drive (ide). To remove them, you will need to unplug the power cable, which is the white plastic plug with the multiple color wires going into it. Then remove the grey wide cable which is your ide cable. Do not remove the other end of the cable from the motherboard. Remove which every ide drive you want to replace and install the new one, and be sure to hook up the ide cable and power supply back into the same positions as before.

Thanks

Mark

Dec 31, 2008 | Compaq Presario 5000 PC Desktop

2 Answers

Manual showing how to remove DVD-ROM Drive from case for Presario 5000?


REMOVE CASE SCREWS FROM REAR CASE COVER.CASE COVER SLIDES OFF FROM FRONT TO BACK.DVD IS HELD BY 4 SCREWS TWO PER SIDE DISCONECT POWER LEAD AND RIBBON CABLE YOU GOT IT,RICHARDM69

Dec 02, 2008 | Compaq Presario 5000 PC Desktop

3 Answers

How to take apart the case of a Compaq Presario C501NR Notebook PC so i can see the motherboard?


Hello,

According to HP, the C500 guide isn't readily available but you can use the C300 manual listed here http://h10032.www1.hp.com/ctg/Manual/c00753552.pdf

You will need to start with the Removal and Replacement Procedure section.

Thanks

Aug 25, 2008 | Compaq Computers & Internet

1 Answer

I have broken the screen on my Compaq Presario c700 how do I go about fixing it?


ok..well..you'll need a new screen. it's not that tough to change, but you'll need to be really careful when you remove the front bezel, as those can crack easily

go to www.hp.com and access the accessories or warranty repair area, and you'll find some useful information.

Jun 16, 2008 | Compaq Computers & Internet

1 Answer

How to replace the inverter on a gateway laptop


Fairly easy operation and is standard accross laptops for years.

Get yourself some microdrive screwdrivers
This is all slow and steady..if you get annoyed or frustrated at any stage, walk away for a few minutes and take a breath.
  • Carefully remove the rubber stoppers at the top and bottom of the screen and put aside (you need these to go back in later)
  • Remove the screws and set aside (get a magnet to hold onto them if you can..they have a tendancy to run away)
  • Very gently starting at the middle bottom, lift the bezel up and out slightly. You will hear it pop as it releases.
  • Move around and do one side, then the other side leaving the top intact.
  • When you have the 3 sides free, start along the top. You will have to slide the lid catches out of the way to pop it near those sections and is why it is left until last.
  • After you have the bezel removed, you will be able to see the inverter at the bottom (sometimes on the side)
  • Remove the plugs from both ends being careful not to break any of the connectors, and install the new inverter
Test the laptop before you put it all back together.
Hope that helps =)

Apr 09, 2008 | Computers & Internet

1 Answer

No Sound


hi there, remove the current driver and install a new one, ty

Jan 10, 2008 | AMD Compaq Presario SR1030NX Athlon...

Not finding what you are looking for?
Computers & Internet Logo

Related Topics:

34 people viewed this question

Ask a Question

Usually answered in minutes!

Top Compaq Computers & Internet Experts

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18333 Answers

Abhinandan  Patil
Abhinandan Patil

Level 3 Expert

562 Answers

Are you a Compaq Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...