Question about Siemens Lands Phones
I require an owners manual for a Siemens A2430 cordless phone. Is this available? One of the individual phones will not work; and I cannot get to any menu to be able to dial from this Set #1.When I press "talk" to make a call, I get a message "Searching"; and when I press "end", I get a message "Please Register". The manual for this phone has been misplaced.
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: Phones will not register
Pick a handheld, press Menu - H/set settings - Reg Handset - Select Base 1, enter 0000 as password. Now on the bottom of the base station press and hold the Register button in for about 10 seconds or until the h/set beeps.
Posted on Jan 23, 2008
To register your handset to that base station, you must put the base station in registration mode at the same time you put the handset in registration mode. This is how you do it. At the handset you push OK when it asks you to register. If it asks you for the pin enter 0000 (factory pin) and push OK. The handset should say "registering base 1". Then at the base press the page/reg key down until it flashes (its to the immediate right of the cradle where you rest the handset for charging). That puts the base in registration mode and now its looking for the handset and vise versa. Now watch your handsets display. If it asks to to select an intercom number, then push ok and your done. If it says "invalid pin" then you need to reset your pin on your base (thats a different problem see below). If the handset times out and never registers, you need to repeat the process a couple times, you may have a bad base or it needs to be defaulted. If you need more help you can download a manual for free or get free technical help at the link below.
If you need to default your pin, you can do so but it will default the base station to factory settings. To do so remove the power from your base, hold your page/registration key down, and apply power back to the base. Count to 15, then let off the key. Turn off the power, count to five, then apply power again and follow the steps again to register the handset and you will need to reregister every handset that was previously running on it.
Posted on Feb 10, 2008
SOURCE: STILL SAYS "PLEASE REGISTER"
I think this may be the answer. With multiple handsets reading "Please register" and a "working" base station (w ith dial tone). If you bring the remote units to the base station and place them on hte base, they will register and stay registered after you return them to the remote base. It doesn't say this anywhere in the instructions as it gives you the impression the remotes will register from their own base.
Posted on Mar 24, 2008
SOURCE: I have a 3 phone
May be your base just doesn't support 3 phones at the same time. Try to turn off one of the working phones, reboot your base and reregister the one that you have problems with. If it works then turn on the turnedoff phone and try to register it, if the same problem appears with this one, then your base just doesn't support 3 phones at the same time.
Posted on Jul 24, 2008
Tips for a great answer:
Jul 22, 2012 | Siemens Gigaset C455 Cordless Phone
Aug 16, 2011 | Siemens Gigaset A495 Cordless Phone
Aug 03, 2011 | Siemens Cell Phones
Jun 17, 2010 | Siemens Gigaset S455 Cordless Phone
Oct 30, 2009 | Siemens Gigaset 8800 Cordless Expansion...
Jan 08, 2009 | Siemens Gigaset 4010s Classic Cordless...
Jan 04, 2008 | Lands Phones
Jul 05, 2007 | Siemens Gigaset C455 Cordless Phone
195 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: