I download from epson.com the driver for epson lx 300+ but i think i need some settings because don-t work.........i have the sign of question on the printer

You can download the driver here (make sure to select the correct operating system):

http://www.epson.com/cgi-bin/Store/support/supDetail.jsp?oid=75683&infoType=Downloads

http://www.epson.com/cgi-bin/Store/support/SupportIndex.jsp
download at link above

Hi, Go to any one of the below links and download your software. http://www.epson.com/cgi-bin/Store/support/supDetail.jsp?BV_UseBVCookie=yes&infoType=Downloads&oid=14340&prodoid=10526&category=Products

http://driver.wareseeker.com/free-epson-lx-300-ii/

You need the correct printer driver installed to the computer printing the junk you can not read

Go to this site to download to your computer

http://download.cnet.com/Epson-LX-300-Printer-Driver-Disk/3000-2116_4-10012184.html

wanna free downlode software of Epson Lx-300+

Please get it here : www.epson.co.id/epson/drivers/driver_download.htm
www.printcountry.com/drivers/EPSON_DRIVERS.asp
Jay wgft

I have some problem, but now have solved
1. replace your original epson lx-300+II driver by IBM ProPrinter II from windows installation driver.
2. in control panel-->printer and fax-->choose IBM Proprinter II ---> click File-->server properties--> click form tab--> chek create new and fill new paper size and don't forget give a name (ex. 8.5x6)--> save form
3.In printer and faxs right click IBM Proprinter II-->choose properties--> click device setting tab --> change tractor feed, manual paper feed and upper paper tray feed to new name (8.5x6)
4. Good luck

use the com1, and use a baud rate like 9600, with 8 and 1 bit stop. dont. be sure that is in ESC/P or IBM as you requiered. if your software use directly the serial port, be sure that the bios set up is properly. i think that the lx300+ have less buffer than lx300+2
and if you use high speed, could loose info.

drivers para epson lx 300

Hi,

You can download the drivers here from Epson.