Question about Childesigns Dayton 21-815 Crib

1 Answer

Sliding latch/railing Hi! As we were putting our crib together again today, we accidently broke the latch on the left side of the railing that moves up and down on our childesigns crib. Is there anyway/where we can get a new one?

Posted by on

  • Anonymous Sep 09, 2008

    I need a left latch bracket for evenflo crib (jenny Lind manufactured 8-19-99 crib #012614.....evenflo website no longer carries.....where can I get one?

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 2 Answers

Go to www.productsamerica.com You can get hardware for any crib made in the US I think within the last 10 years. Hope this helps.

Posted on Sep 11, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do you put up a graco pack play


Hi, to set up the pack and play, first latch each of the four sides together. (Each side rail latches together in the middle -- just straighten the rail.) Once all four sides are locked and straight, push down on the center of the pack and play bottom (it's probably red) until it snaps into place.

To fold the pack and play up, just follow these instructions in reverse -- pull the bottom up first, then press in the button on each side rail to fold up each side.

Always make sure the pack and play is completely set up and locked before putting a child in it!

Aug 02, 2010 | Graco 9445DOH Crib

1 Answer

Looking for teething rails for the Bethany James crib.


gud morning..maybe you can put a replacement of the plastic piece that slides or snaps on and covers the entire top of each side rail, you replace it by puting a cloths on it..and make sure that the child is safe.

thank you

Feb 20, 2009 | DaVinci Leonardo Crib

1 Answer

Can't get the side rails on the crib


i unscrewed the bottom latch from the crib then slid the top part of the railing on to the crib. screwed the bottom latch directly back onto the crib already latched to the railing. it took me all of 10 minutes once my friends husband told me what to do.

Dec 17, 2008 | Delta Enterprise Luxemburg 4600 Crib

2 Answers

Can not get crib together...need instructions


called the people we got it from and they came and put it together. It would have been impossible without them or instructions

Sep 16, 2008 | Cosco 2 in 1 10-185-WHO Crib

1 Answer

Babybed


there is supposed to be a small plastic stay on the front of the lock.my son broke it off on his,what i did was put a small screw in the front of the slide just out of the way,but close enough to catch when the rail is put up i hope this helps email me&
let me know georgcat29@yahoo.com

Sep 12, 2008 | Graco Apsen 3-in-1 8740 Crib

1 Answer

Side rails


I have a similar problem, but a different Simmons crib. I called the company that momof4girls unrecommended and they were VERY helpful, but they were not able to ship me the parts as Simmons discontinued this type of hardware in the early 90's. My crib has a headboard and footboard - the 2 side boards are able to slide up and down on aluminum slats (almost 3 feet long.) The aluminum slats are connected to the headboards with 8 bolts; what I needed to order replacements of are the plastic sliders that allow the sidewalls to go up and down on the aluminum bracket. Not only do they allow it to go up and down, but without them you are not able to assemble the sidewalls to the crib at all. I solved the issue buy purchasing L brackets at Lowes and permanently attaching the sidewalls to the headboard and footboard, but it made it so the sidewalls did not raise or lower. I am ok with that! However, if you do NOT have the aluminum slats, you may be out of luck. The spring for the bed attaches on the aluminum brackets, so even if you were able to bolt the 4 sides together, you still have to figure out a way to attach the spring for the mattress (which connects by sliding a hook into holes on the aluminum bracket... no room for bolts here.) I am rather surprised that the hardware for this crib is plastic and aluminum; the bed is HEAVY and it is very difficult to put together as the aluminum slider is easily bent and the plastic sliders are flimsy. I actually broke the plastic pieces during assembly. No wonder this hardware was discontinued! I called Simmons and asked if they had an "updating' kit... they do not. Good luck!

Aug 25, 2008 | Bassett Cribs, Cradles & Bassinets

5 Answers

The Dorel 3-1 convertible crib model # WM1633


Do not use this crib. This crib broke and caused my infant son of six months to get caught. He passed away on October 16th because of getting caught in this crib. I am trying to getting this crib recalled. Please Please do not use drop down cribs. They are entrappment devices for infants. 3 infants including my son have died in 2008 due to drop down side cribs. Please for your babies sake, take this crib back.

Jun 22, 2008 | Dorel Alexander

1 Answer

Crib n' twin 580


Go to these people, they are AWESOME and will help you!!!

http://www.productsamerica.com/

Aug 05, 2007 | Kinderkraft Vermont Crib

Not finding what you are looking for?
Childesigns Dayton 21-815 Crib Logo

Related Topics:

165 people viewed this question

Ask a Question

Usually answered in minutes!

Top Childesigns Cribs, Cradles & Bassinets Experts

Mike McWhinney

Level 3 Expert

537 Answers

Jaime Hernandez

Level 3 Expert

2267 Answers

Are you a Childesigns Crib, Cradle and Bassinet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...