Question about Brookstone Pure-Ion UV Air Purifier

2 Answers

Brookstone Pure-ion Advanced

I clean my filter, put then back and it will not turn on . The machine is lest then 2yr old. Please Help Cost 400.00

Posted by on

  • 1 more comment 
  • craig_wiegan Dec 25, 2008

    I am having the same problem my unit, it will not turn after being unplugged. I can't find a reset button anywhere. Can anyone help me with this problem.

  • chongmcho May 14, 2009

    My unit can't turn on any more. I also rest the unit and but didn't help

  • thomas glatt
    thomas glatt Oct 16, 2016

    When will you answer? (DR Thomas Glatt

×

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

I also had one of these. completely unresponsive. I disconnected the touch panel from the control board on the top of the unit and the power turned on. The unit sems to operate just fine without the touch panel but thats where all of the controls except for the power button. It seems that the touch panel was the culprit. I didn't look into ordering a new one, however. Instead I wired in two pin-switches so i can control oscillation and fan speed.

Posted on Sep 13, 2009

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 3 Answers

Make sure the filter is seated in the unit correctly there is a right and wrong way and unless the connection is made it won't start

Posted on Feb 17, 2009

2 Suggested Answers

  • 1 Answer

SOURCE: Brookstone Pure-ion Advanced

i am a low voltage tech my wife told me that our 506840 air cleaner stopped working so being a tech geek i had to know why it just stopped working.when plugged in i heard a click telling me that the main board was getting power.opened the back end where power cord goes to put my meter and voltage was going to the main power coil. but the main board was oxidized. when my wife was cleaning the filters and might not have had the filters completely dried the water was dripping down to main board.the unit to main power source is not design very well where water from cleaning the filters can drip down to main power board.solution i am working on is trying to get a new board when we bought this it was $499.00

Posted on Mar 08, 2009

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

We have lost our manual, could you pls. tell us how to clean the filter and or other parts, so it functions as a new one.The pure ion advanced purifier is five years old. Thanks, S.T.


I have a .pdf of the manual I can send you. I just run mine throught the dishwasher by themselves. The manual says to do that or hand wash them in the sink. Just make sure they are thoroughly dry before putting them back in.

Dec 28, 2010 | Brookstone Pure-Ion UV Air Purifier

1 Answer

How remove and clean filters from Brookstone pure ion uv air purifier?


how to remove and clean filters for the Pureion UV air purifier?

May 21, 2010 | Brookstone Pure-Ion UV Air Purifier

1 Answer

Cleaning tips for my Brookstone Pure Ion


I have Bridge Stone Ionic Air Cleaner and I cant figure out how to take it a part to clean the filter. It's a few years old, used very little and I don't have a manual. Can anyone help. thanks

Nov 06, 2009 | Brookstone Pure-Ion UV Air Purifier

1 Answer

Clicking noise


after cleaning is it dry. you might want to take apart and see what is clicking wheel or some thing hard to tell since i can't see it. as far as options . check with the manufacture google it check them out on line hope this helps. Tom

Jun 20, 2009 | Brookstone Pure-Ion (506840) Air Purifier

1 Answer

Brookstone Pure-ion Advanced


i am a low voltage tech my wife told me that our 506840 air cleaner stopped working so being a tech geek i had to know why it just stopped working.when plugged in i heard a click telling me that the main board was getting power.opened the back end where power cord goes to put my meter and voltage was going to the main power coil. but the main board was oxidized. when my wife was cleaning the filters and might not have had the filters completely dried the water was dripping down to main board.the unit to main power source is not design very well where water from cleaning the filters can drip down to main power board.solution i am working on is trying to get a new board when we bought this it was $499.00

Oct 15, 2008 | Brookstone Pure-Ion (506840) Air Purifier

5 Answers

Clean Filter Red light


I cleaned the filters as well earlier and the red filter light still blincked to clean the filters. Then I pushed the power button for about 10 seconds continously and then turned it on and the light turned off.

May 22, 2008 | Brookstone Pure-Ion UV Air Purifier

1 Answer

Brookstone pure ion filters


You need to reset it, unplug the unit and take out both filters. Then, plug it back and and simultaneously and firmly slam both filters into the back of it at the same time. Before putting both filters back inside the until, also vacuum out the insides in case there is hair/dust inside of it that has accumulated.
Also, make sure your filters are 100% dry before every putting them back inside the unit.
Good luck!

Mar 02, 2008 | Brookstone Pure-Ion UV Air Purifier

3 Answers

PURE Ion shuts off after a few moments


You need to shut it off, unplug it, and pull both the filters out at once and then plug it back in, and push both filters in at the same time, simultaneously. This will re-set it.
Also, if this continues to happen, you must vacuum the insides of the unit, aside from the filters, themselves, it can get all clogged up.
We live on a busy street and our house can get REALLY dusty, we have a older home with carpets and two cats - so our unit really has to work hard!
Good luck!

Oct 28, 2007 | Brookstone Pure-Ion UV Air Purifier

Not finding what you are looking for?
Brookstone Pure-Ion UV Air Purifier Logo

1,177 people viewed this question

Ask a Question

Usually answered in minutes!

Top Brookstone Air Purifiers Experts

kakima

Level 3 Expert

102366 Answers

yadayada
yadayada

Level 3 Expert

70374 Answers

Michael Youngman
Michael Youngman

Level 2 Expert

156 Answers

Are you a Brookstone Air Purifier Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...