Question about Maytag Performa PAV2200
I have a Maytag washing machine Model# PAVT910AWW which I purchased two and a half years ago. Recently it has been Humming,after the initial fill when it's supposed to agitate, instead it starts to hum. I will play with the timer meaning pushing it in to stop and pulling it out to start, finally after doing this several times the washing machine will start to work until it gets to the spin cycle and then the same thing all over again. I have to repeat the pushing and pulling of the timer until finally it has gone through all of the cycles and has completed washing the laundry. I am afraid I am going to damage something else by doing this repetitively. what in your opinion has to be replaced or repaired? I intend to do this myself if possible. Please let me know what you think may be the problem.
Barrie, Ontario, Canada
I have the same problem!
Posted on Jul 05, 2010
Sounds like a defective part! No way for you to know or fix it your self.
You will need service at this time!
A&E Factory Service is nation wide!
They are open 7 days 24 hours to make appointments
Posted on Aug 24, 2008
Tips for a great answer:
Mar 16, 2015 | Maytag Washing Machines
Jul 30, 2014 | Maytag Performa PAV2200
Jul 21, 2014 | Maytag Bravos Top Load Washer
Jan 21, 2013 | Maytag Washing Machines
Jan 06, 2010 | Zanussi Washing Machines
Jun 24, 2009 | Maytag Performa PAV3200
894 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: