Question about Elna 2007 Mechanical Sewing Machine

1 Answer

I have and Elna su sewing machine and i can't get it to zig zag. Please refresh my memory on the settings i should have it on.

Posted by on

  • Anonymous Mar 16, 2014

    elna su air electronic zig zag not working

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 11 Answers

Depends on which SU you have, but you need to move the stitch selector to Zig Zag, then set the stitch length to 2.5 and the stitch width to at least 2.

On the earlier models the stitch selector is a wheel inside the flap on the top of the machine, on the air electronics, it is a coloured dial.

If this doesn't help, check if you've inadvertently moved the needle position to the side setting.

Posted on Nov 05, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Elna machine puckers silk on zig zag stitching, Elna 2007


Yes, because a zig zag stitch is creating a wide stitch and the tension on the thread is going to pull the fabric within the seam together, you can't seam thin fabric with a wide zig zag. It will "tunnel together". If you are using this stitch to neaten a raw edge, then try using the serpentine or three step zig zag where the needle pierces the fabric 3 times in each leg of the zig zag, this will give better results.

Jul 07, 2015 | Elna Sewing Machines

1 Answer

Set zig zag stitch on Elna Elina 40


I have looked but can't see a manual, but looks like push button stitch selection on front of machine, often it will be same as straight stitch, but need to take stitch width from 0 to 4

Feb 27, 2015 | Elna Sewing Machines

1 Answer

How do a i do a zig zag stitch


Simply turn the dial to get the zig zag setting. Manual in the linky
http://www.janomeflyer.com/pdf/Elna%20eXplore%20320%20manual.pdf

Oct 07, 2014 | Elna Sewing Machines

1 Answer

Raw edge zig zag stitch bunching underneath


When zig zagging over a raw edge, the tension on the thread will pull in the fabric, especially in lightweight cottons or even lighter organza. Its not the best edging method for very light weight fabrics. You can try using a smaller zig zag, loosening off the top tension a little bit. Or if your machine has it, use the triple zig zag or serpentine stitch, where the needle goes through the fabric three times to make up each zig stitch, this stitch is better for edging most fabrics and is my preferred stitch.

Sep 26, 2014 | Elna 3210 Mechanical Sewing Machine

1 Answer

Elna 6003


Check to see if your needle is bent.

Feb 06, 2013 | Elna Quilter's Dream 6003Q

1 Answer

The 6 built-in stitches (such as blind stitch, darning stitch, etc.) are not working, they only just do the basic zig zag stitch. Also the cams for decorative stitching do not work either. These are all...


I have the same model, have you turned the first knob on left, the stitch selector, to the stitch you want? Then turn the middle knob, the stitch width to "4". Use the colour guide marks shown in the little picture on left of the knobs so you are dialing up the right settings. So for the zig zag, elastic blind hem, scallop, overcasting and multi-stretch stiches, 1-6 on the diagram you'll be setting the left knob to 1, 2, 3, 4, 5 and 6 respectively and the stitch width and length knobs to "green", you can vary the length and width to suit what you want.

Then for the cams, you need to set everything zero, turn stitch selector to 7, the cam setting. then turn the width to orange again (3-4) and the stitch lenth selector to the orange setting, right around the knob. This engages the "Elnagraph" the device under the flap on top of the machine to read the discs. Basically the green stitches the needle is swinging from side to side while the feed dogs move the fabric forward, making your zig zags, blind hems etc.
But when you engage the Elna graph, the machine matches stiches by moving the fabric "forward and backwards at certain times, while the needle does its thing from side to side. This is what makes elastic or stretchy type stitches because you are putting "stretch" into the seam by sewing forwards and backwards.

Please note: always turn your stitch width and length back to Zero BEFORE you make any changes to the left knob and select a new stitch as this saves on wear and tear to the moving parts in these wonderful machines.

I do hope this assists you and I haven't just told you stuff you already knew!

Feb 15, 2011 | Elna Sewing Machines

1 Answer

My Elna SU will only do straight stitching it will not zig zag


I have the same model, have you turned the first knob on left, the stitch selector, to the stitch you want? Then turn the middle knob, the stitch width to "4". Use the colour guide marks shown in the little picture on left of the knobs so you are dialing up the right settings. So for the zig zag, elastic blind hem, scallop, overcasting and multi-stretch stiches, 1-6 on the diagram you'll be setting the left knob to 1, 2, 3, 4, 5 and 6 respectively and the stitch width and length knobs to "green", you can vary the length and width to suit what you want.

Then for the cams, you need to set everything zero, turn stitch selector to 7, the cam setting. then turn the width to orange again (3-4) and the stitch lenth selector to the orange setting, right around the knob. This engages the "Elnagraph" the device under the flap on top of the machine to read the discs. Basically the green stitches the needle is swinging from side to side while the feed dogs move the fabric forward, making your zig zags, blind hems etc.
But when you engage the Elna graph, the machine matches stiches by moving the fabric "forward and backwards at certain times, while the needle does its thing from side to side. This is what makes elastic or stretchy type stitches because you are putting "stretch" into the seam by sewing forwards and backwards.

Please note: always turn your stitch width and length back to Zero BEFORE you make any changes to the left knob and select a new stitch as this saves on wear and tear to the moving parts in these wonderful machines.

I do hope this assists you and I haven't just told you stuff you already knew!

Feb 02, 2011 | Elna Quilter's Dream 6003Q

Not finding what you are looking for?
Elna 2007 Mechanical Sewing Machine Logo

396 people viewed this question

Ask a Question

Usually answered in minutes!

Top Elna Sewing Machines Experts

Mike Cairns
Mike Cairns

Level 3 Expert

3053 Answers

Bargain Box
Bargain Box

Level 3 Expert

1388 Answers

Douglas Plant
Douglas Plant

Level 2 Expert

165 Answers

Are you an Elna Sewing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...