When I turn on the camera, it says "memory full" even though there are no pictures in the memory card

Not sure if it will be this, but has the SD card got locked by accident? There is a little sliding button on the side of the card, which can be locked to protect the content. My camera shows the card as full if I accidentally lock the card. You can just slide it back again to unlock it. I never noticed the button was there until I accidentally knocked it while loading the card in and out of my PC to transfer the photos.

in camera memory is alredy full but u say only memory card formaat pls look the camera memory and no answer that the card is full

Format the card again.

The memory card should be formatted each time you finish transferring your pictures to your computer, in order to avoid exactly this type of situation.

Hi, Move the internal pictures to your card and then switch it to record to the card...
Here is a tip that may help you with your problem.... I found out that with my cameraI needed to transfer the pictures within the camera to the card and them fromthe card to the computer...
The process for your camera may not be exactly the same, but should be similar.

How toTransfer Internal Camera Memory Pictures heatman101

Use the memory card on your PC card reader and check the properties, if the card can be formatted then do so after removing all the files/pictures.
Now try this on the camera, if another card works well with the camera the card is faulty , if not there are issues with the interface within the camera and must be probed .

To resolve this problem:-Turn off the camera and insert a new memory card.
-Transfer or delete pictures from the memory card.
-Change the storage location to use the internal memory.

1. Make sure you are saving all your images to what is called the "external" memory, not the tiny internal memory.
2. Format your memory card using the format feature on your camera.

make sure you have all the pictures removed then format the card using the camera. it should be in options.

robert

the camera is meant to be used with a SD memory card - the internal memory is very small and probably will only hold 5-10 pictures. empty it just by deleting the pictures. memory cards are cheap and available everywhere. good luck!

Hi, The solution is to format the memory card or initialize the memory card. Note formatting the memory card will delete all the pictures or data stored. Formatting memory card
1. Press the MENU button in any mode.
2. Move the 5-way scroll button to the right and press the confirm button to enter the SETUP menu.
3. Move the 5-way scroll button down and enter the FORMAT menu. Press the confirm button and the "Format?" dialog box appears. Select "Yes" to start formatting. Select "No" to cancel.