Question about Insignia IS-LCDTV32 32 in. Television

1 Answer

Need code I have a Insigna t.v. lost converter, have a systemlink 4 rca universail from previous use, but have lost the code book can you please help me asap I would really really appriciate it.

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

I actually locked up systemlink 4 rca and they have it posted for free on how to automatically set your converter, which was very easy.

Thank you.

Posted on Aug 24, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Lost book on remote need zenith codes for rca remote to program tv


Which RCA remote are you using? RCA Universal remote codes are available at the code finder: http://rcaaudiovideo.com/remotecodefinder/ . Enter the model and then the device in the two drop down menus then click Search.

For example the Zenith codes for the RCR312W are 11423, 10017, 10463, 11265, 10178, 10030, 11145, 10145, 10092, 10016 .

Please note that codes programmed in the remotes are usually limited to those for devices released 6 months or more before the remote was programmed. If your TV is newer than your remote, you may need a new remote.

I hope this helps.

Cindy Wells

Jun 21, 2011 | Flat Panel Televisions

1 Answer

I have lost the instruction for the rca converter box and need to progrm a magnovox tv


if you have the manual for your tv it should be in that or when i bought a 4 in 1 remote you get the number codes with that if not look up the model on the internet that might have your codes

Jun 14, 2011 | Flat Panel Televisions

1 Answer

Do not know how to program the systemlink3 universal t,v. remote control to my t.v.


Option 1:
To clear things up and make it simple, here is how to program the RCA Systemlink 3 remote:
****WITH DEVICE TURNED ON****
  1. Press and hold the "Code Search" button until the LED lights, then release. LED will stay light.
  2. Press and release the device key to be programmed. LED will go off when button is pressed and back on when released. LED remains on.
  3. Press and release the remote On/Off (power) button as many times as required to turn your device OFF.
  4. When device turns OFF, press and release the ENTER button.
Test remote on device, if ALL functions do not work, repeat above procedure.
***IMPORTANT NOTE***Count how many times you press the On/Off button. If ALL funtions do not work and you need to repeat, you don't want to stop at the same non-working code. For instance, if it takes 23 times to turn your device off and after testing, the remote does not control all functions, repeat steps 1-3 BUT when the device turns off at the 23rd time, turn it back on using the power button ON THE ACTUAL DEVICE then continue with step 3 and 4 from above.


Option 2:

Thanks for the hints on your web site. For the RCA SystemLink 3 with the key pad, I could not get the sequences described to work. But they did point me in a direction which worked for my remote:
  • With the TV on (for TV)
  • Press and hold code search until the light stays on
  • Press TV (for TV) button once
  • Press the on/off button once
  • Thereafter, the light will stay lit and every couple to three seconds it will blink twice indicating it is trying another code.
  • When the TV turned off, I pressed enter. Thereafter the unit worked.

May 04, 2011 | RCA Flat Panel Televisions

1 Answer

I have a rca converter and want to know if there is a code so i an use it on my citizen tv....i have lost the book of codes it comes with.


Citizen tv.Codes are 005,007,014,037,080,148,182,177,186,195,198, 274.These are 100% correct codes came out of the RCA DTV coverter box sheet itself.

Apr 03, 2011 | RCA Flat Panel Televisions

1 Answer

I need code for coby tv-1360, to work with rca systemlink 4


Hello
There is no code for your Coby with RCA systemlink-4 specified. But you can find the stored coed in Coby with RCA remote. Here is the proceedings. Do it and check.
Press and Hold CODE SEARCH button until ALL FOUR device choice buttons light up.
These FOUR buttons DO light up, they are on the SECOND ROW from the top; and from LEFT to RIGHT are named:
SAT-AUX CABLE VCR TV

After ALL FOUR are lit, RELEASE the CODE SEARCH button. All four lights will stay lit!
Select the device you want to control. Press that button ONCE!
The light will stay on for the selected device, the other lights will turn off. Press the OFF-ON button repeatedly until device powers up or down. If device is off and this turns it ON, try channel up or down. If device is turned ON and this turns it OFF, press ENTER and try to turn it on.
If this does NOT work, you don't have the correct code. Go through all the previous steps from the beginning. I actually counted the number of times I depressed the OFF-ON switch, and this helped immenssely! For example, the TV turned Off or On after 19, 45, 76, 94, 115 and 164 depressions of the OFF-ON button.
Of course it wasn't until I hit the 164 mark that it controlled all functions, and is now going great! But I knew NOT to **** around with a number I had all ready tried, and which didn't do the trick the first time!
Remember, when you start from the beginning, it's just that, from the beginning! You'll notice the device turns on or off after the same amount of depressions of the OFF-ON button, but that may not be the code you need.
Again, this is for an RCA SystemLink 4 Remote Control only, NOT for any other model!!

[2]
Without codes:
  1. Turn on TV.
  2. Press and hold CODE SEARCH until all device buttons light, release button.
  3. Press TV button. TV button will stay on.
  4. Press POWER repeatedly until TV turns off.
  5. Press ENTER.
[3]
With codes:
  1. Turn on TV.
  2. Press and hold CODE SEARCH until all device buttons light, release button.
  3. Press TV button. TV button will stay on.
  4. Using number keypad enter code for TV.
  5. Press ENTER.

Mar 02, 2011 | Coby Flat Panel Televisions

1 Answer

I have lost the remote for the sharp dv-740. I have purchased a systemlink 3 RCA universal remote. I have tried all the codes for sharp and it doesn't work. Please assist me with this issue.


Codes normally using for Sharp
001, 002, 017, 029,094, 095, 096

Here is a link which will help you to program the RCA remotes Manually,Automatically and testing codes for maximum functionality

http://voxrightnow.custhelp.com/app/answers/detail/a_id/11073/~/programming-the-rca-rcr311b-remote-control

Feb 17, 2011 | Flat Panel Televisions

2 Answers

I have apex dt-250a digital converter box and I lost the remote. Purchased RCA universal remote and I have not a clue what codes I need or how to enter them. Can you help?


Located this "How to teach your RCA remote how-to" for you:
http://www.justanswer.com/electronics/228cy-unable-locate-apex-remote-today-purchased.html

The trick is that you want the converter box on AUX 1 or AUX 2, but neither of these will "learn",
so you "learn" the code on one of the other devices (like VCR), then take the learned code and
enter it manually into AUX 1 (or AUX 2), then reset your RCA remote "VCR" code to its original code for your VCR. So:
(1) display/write down your VCR code
(2) learn DT250A code on VCR setting on the remote
(3) manually enter the learned code into AUX 1 or AUX 2
(4) manually reset your VCR code to the original value

Any more specific help would come if you would post your RCA universal remote model number.

Jan 31, 2011 | RCA Flat Panel Televisions

2 Answers

I am looking for the codes to run my t.v. my t.v. brand is Panasonic and the universal remote I am using is RCA RCU800MS 8-Device Universal Remote. I lost the code book and was wondering if I could get the...


The codes I have are: Code 003 for Panasonic TV
Code 054 for Panasonic TV
Code 055 for Panasonic TV
Code 062 for Panasonic TV
Code 109 for Panasonic TV
Code 130 for Panasonic TV
Code 170 for Panasonic TV
Code 214 for Panasonic TV
Code 350 for Panasonic TV
Code 351 for Panasonic TV

The codes can be looked up here: http://remotefinder.rca.com/default.aspx?site=rca for most RCA remotes. Please note these codes will work for TVs released at least 6 months before the remote was programmed.

I hope this helps.

Cindy Wells

Nov 19, 2010 | RCA Flat Panel Televisions

2 Answers

I cant find the universail remote number in order to program it please help


hi look on your instruction sheet there is an auto code finder procedure

Sep 28, 2010 | Flat Panel Televisions

1 Answer

3-digit codes for RCA converter box'


021,060,077,035,202,065,042,105,149,050,

Jan 22, 2009 | TruTech PLV16320 Television

Not finding what you are looking for?
Insignia IS-LCDTV32 32 in. Television Logo

127 people viewed this question

Ask a Question

Usually answered in minutes!

Top Insignia Flat Panel Televisions Experts

Sp Gupta

Level 3 Expert

667 Answers

Gareth Cockram
Gareth Cockram

Level 3 Expert

657 Answers

The Wyzzyrd

Level 2 Expert

83 Answers

Are you an Insignia Flat Panel Television Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...