Question about Hoover Floormate H3000 Upright Wet/Dry Vacuum

1 Answer

I own a RCA DVD recorder, having problems with the drawer/door opening

Suddenly The drawer stopped opening. YOu can't open it with the remote or open it manually. The gaurantee just ran out two mo. before it stopped working and I cant get assistance from the Manuf. b/c they are being bought out by another company. Is there a part that went out and if so what is it and where can I go to get problem fixed?

Thank you


Uncle Tbird

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 84 Answers

This is in the wrong area...you are writing this under the Hoover Floormate H3000 vacuum troubleshooting area

Posted on Nov 13, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

The roller shutter does not stop while rolling up, noting it has a motor, what would be the problem?


The "up" limit switch is not working. there will be one to stop the door going up and another to stop it at the bottom.
They could be magnetic or a contact micro switch, check the door track and look for something at the top of the track with wires coming out and see if it lines up with something on the door when it is in the normal open position.Similar to a burglar alarm contact on a door or window. You could try putting a magnet next to it as the door is opening to see if it stops or if it is a mechanical switch try operating it manually (preferably with an insulated screwdriver)

Nov 08, 2016 | Vacuums

1 Answer

Suddenly stopped steaming, tank filled steam light stays on, no steam but heats up? Problem solving in manual just states the obvious? Can you suggest anything else or will I have to contact Hoover


Perhaps Element not heating to full temperature to generate steam.
Temperature sensor may be faulty if element is ok.
1 Element or 2 ????

Sorry... No magic fix button

Open it up and start testing things.
a multimeter comes in handy here.

or
back to Hoover repair centre

Good Luck

Feb 03, 2016 | Hoover Vacuums

1 Answer

Chain came off tracks...repaired it and now it will not run full cycle...only goes a foot or so and then stops


if your talking about a garage door opener , pull the manual release , drop the door all the way,, with the handle still disengaged,, push the button to drop the door,, latch the handle,, try that , if that doesn't work, you need to adjust the chain so that reaches the stops at the correct time, here is a video on it,, Good Luck http://www.ehow.com/video_8739813_adjust-chain-garage-door-opener.html

Sep 11, 2011 | Vacuums

1 Answer

After a brief power outage my Marantec 4700 garage door opener has problems opening/closing. When opening it stops at the fully open position and the lights blink, when closing it automatically reverses...


This is not a sensor issue, I have a similar problem, sensors work fine, garage door is still fully functional, all operations, including safety sensors work properly, just the overhead lights flash. I suspect there was damage to the power board due to a power surge, going to order a replacement to see if it works, will let you know how it goes.

May 14, 2011 | Vacuums

1 Answer

I have a 1/2hp master mechanic door opener. when I close the door it goes the full travel down and then opens back up. i checked the eyes and everything was lined up. do you have any suggestions?


Look at the setting for "fully closed". it sounds like yours is set for slightly than the actual opening....So, the door reaches that location, and it thinks it hit an obstruction, which causes the door to open....While you are there, reset the sensitivity settings.

What I would do is back off the closed position setting so that the door stops an inch or two off of the ground, then adjust until the door is in the correct closed position...

You are correct on the "eyes" (infrared sensors) being lined up, if they were not, the door would not close at all.

Mar 15, 2011 | Vacuums

1 Answer

The cd drawer quit opening and closing- how do I get it to work


I had a cd drawer that would not open.
At first, I could tap it with my knuckles while it was trying to open.
Then eventually I had to replace it when it would not open at all.
Gary

Jan 28, 2011 | Vacuums

1 Answer

Garage door opener (1/2 hp model #139.53675SRT). Does not respond to door opener, vehicle remote or key pad remote. gives two quick buzzing sounds when any of these devices are pressed. Wiring from door...


The eyes should have a light on them. Either red or green. If they are green then the eyes are ok. If there is no light on either eye, then this is the problem. If the eyes are okay, then I would check the motor. Make sure that it is getting power. Another thing that you can try is to unlock the door from the opener and see if the opener will move the chain by itself. The door could be jammed.

Jan 19, 2011 | Vacuums

1 Answer

Have LG dvd player. When i insert any dvd it does not hold the dvd and opens immediately, however it does not keep opening when power on. I open the cover to obser the problem, i found that when dvd is...


Dear Friend,
All DVD / optical media player operates on LASER beam. When you insert media ( disc) it will try to "Sence" media by switching on the LASER beam. Beam will be reflected from the media and give information about its type and size.


moz-screenshot.pngsony_baroda_9.jpg

If there is some dirt ( generally dust) LASER beam will become weak and may not provide enough information to the player so it may not rotate.
What you have to do is switch of the player and unplug it. Clean Lens of the LASER pickup with a swab of fine cotton or use lens cleaner CD.
After some time. Restart the system and you will find working normally.

If there is no result, take the system to good technician.

I hope this is useful to you.

Thank you for visiting FixYa.

Dec 24, 2010 | Vacuums

Not finding what you are looking for?
Hoover Floormate H3000 Upright Wet/Dry Vacuum Logo

34 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hoover Vacuums Experts

Les Dickinson
Les Dickinson

Level 3 Expert

18385 Answers

Gerry Harvey
Gerry Harvey

Level 3 Expert

1456 Answers

Brad Brown

Level 3 Expert

15220 Answers

Are you a Hoover Vacuum Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...