Question about Compaq PC Desktops

2 Answers

On my screen, I have "Windows could not start because the following file is missing or corrupt" Windown/System32/Config/System. You can attempt to repair this file by starting Windows Setup using the orginal Setup CD-ROM

Posted by on

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 2,961 Answers

It is telling you that you have a corrupt registry and it needs to be repaired, you will need an xp cd to repair windows, and set your bios (F2 or Del on boot up) for the cdrom to be first boot device.

Posted on Aug 23, 2008

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 435 Answers

Try to boot in safe mode by pressing F8 while the system is booting.

Once in safe mode, use system restore to restore your computer state to an earlier date when this problem was not present.

Thanks

Posted on Aug 23, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Windows\systems32\config\system file is missing or corrupt


You can order a new set of disks from the manufacturer or pull out the had drive and plug it into another PC or buy an external hard drive dock . Newegg has them for around $20

Mar 09, 2014 | Insignia PC Desktops

Tip

Boot problems and their possible causes & resolutions


Symptoms:
Black screen
"Invalid Partition Table"
"Error loading operating system"
"Missing operating system"


Cause:
Corrupt Master Boot Record (MBR)

Resolution:
Boot into Recovery Console and run "fixmbr" to repair the MBR

--

Symptoms:
"A disk read error occurred"
"NTLDR is missing"
"NTLDR is compressed"


Cause:
Corrupt boot sector

Resolution:
Boot into Recovery Console and run "fixboot" to repair the boot sector

--

Symptoms:
"BOOT.INI is missing or corrupt"
"Boot device inaccessible"
"Windows could not start because the following file is missing or corrupt:
<Windows root>\system32\hal.dll"


Cause:
BOOT.INI missing, corrupt or out of date as a partition has been inserted

Resolution:
Boot into Recovery Console and run "bootcfg /rebuild" to repair the BOOT.INI

--

Symptoms:
"Windows could not start not start because the following file is missing or corrupt:
\WINDOWS\SYSTEM32\CONFIG\SYSTEM"


Cause:
Corrupt/missing system hive

Resolution:
1. Boot into Recovery Console and run "chkdsk C: /f" to check the system disk for errors and fix them, then reboot.
2. If the error continues and System Restore is enabled, copy the system hive from the last restore point into \WINDOWS\SYSTEM32\CONFIG
3. If the error continues, copy the system hive from \WINDOWS\REPAIR into \WINDOWS\SYSTEM32\CONFIG
4. If the error continues, perform a repair installation by booting from the Windows installation media


--

Symptoms:
"Windows could not start because of a computer disk hardware configuration problem.
Could not read from the selected boot disk, Check boot path and disk hardware."


Cause:
Boot volume (with Windows folder) is not accessible as defined in BOOT.INI

Resolution:
Check the boot volume is accessible

--

Symptoms:
Dual-boot 32-bit Windows and 64-bit Windows system reports "NTOSKRNL.EXE is corrupt" trying to boot into 64-bit Windows

Cause:
System volume contains an older boot loader than the boot volume requires - e.g. XP SP2 installed after XP x64

Resolution:
Copy NTDETECT.COM and NTLDR from XP x64 installation media to the root of the system volume

on May 03, 2010 | PC Desktops

1 Answer

I have a Dell Inspiron 1525 stuck in windows boot manager file \windows\system32\config\system status: 0xc000014c info: windows failed to load because the system registry file is missing or corrupt ...


Here's part of an article on how to replace that registry file:

Look in the C:\windows\system32\config\regback\ folder.
There should be copies of the registry files stored inside that folder.
They are backed up periodically and stored in that folder.

If you create a MiniWin, BartPE, or a Linux Live CD, you can start the computer from CD and move the file system to the required folder, C:\windows\system32\config\.

Apr 15, 2013 | Dell Inspiron 1525 Laptop Computer PC...

1 Answer

I can use my Dell OptiPlex GX280 PC Desktop says that windows could not start because the following files is missing or corrupt: \windows\system32\config\system


You'll need a operating system disk or repair disk to run the check disk utility.
To run the check disk utility you will need a repair disc ora operating system disc. Put the disc in the cd drive and boot fromit. You want to get to the Dos Command Prompt (Black screen with whiteletters) and type the following command: chkdsk /r
Check disk will run well over an hour or two and you will notice thepercentages going from high to low, this is normal. Let it run tocompletion. Then reboot machine.

If check disk fails to solve your problem you might have to reinstall windows.Try doing a Repair Install that way you don't loose your data, documents,music, pictures, videos or programs.

In windows xp you get to the dos command prompt by selecting R for repair whenthe options appear.

In Vista and Windows 7 you want to get to the recoveryconsole and look down at the bottom of the window for the Dos Command.

Mar 31, 2012 | Dell OptiPlex GX280 PC Desktop

1 Answer

Following files missing or corrupt: \windows\system32\config\system


Well this means one of important files needed to start Windows is corrupted (it's a registry file).
I'd recommend repairing Windows installation. If you have Windows XP and also the Original Windows CD follow: this guide.

Dec 31, 2011 | Dell OptiPlex 740 (BPCW6TT) PC Desktop

4 Answers

My desktop shut down and is asking me to re install a 32 windows file. What is this and how do I fix it?


Hi, This normally means that a windows file from the system32 folder is missing or corrupt. You will have repair that by using your operating system cd and go to repair when prompted. If this does not work you may have to install a clean copy of your operating system.

Apr 10, 2010 | HP Pavilion a1220n (A1220NED904AA) PC...

1 Answer

All my hardware is HP. I am on my laptop (Vista). My desktop (XP)will not boot up properly after I installed a new HP Monitor & Printer (Printer works OK). The monitorgive the following message: ...


ok..sounds like an operating system mismatch...you may need to remove the software entirely, go to www.hp.com and get a fresh edition of the print manager..sometimes that file gets corrupted..

Oct 14, 2008 | HP PC Desktops

2 Answers

Problem with pc


Here is the solution right from Microsoft.

 

SYMPTOMS
When you try to start or restart your Windows XP-based computer, you may receive one of the following error messages:

Windows XP could not start because the following file is missing or corrupt: \WINDOWS\SYSTEM32\CONFIG\SYSTEM

Windows XP could not start because the following file is missing or corrupt: \WINDOWS\SYSTEM32\CONFIG\SOFTWARE

Stop: c0000218 {Registry File Failure} The registry cannot load the hive (file): \SystemRoot\System32\Config\SOFTWARE or its log or alternate

CAUSE
This issue can occur if the System or Software hive for the Windows XP installation is missing or damaged.

RESOLUTION
To resolve this issue, use one of the following methods.

Use the Recovery Console Tool
To restore a damaged registry hive, use the Recovery Console to restore the backup copy of the hive from the Repair folder. The Repair folder contains a copy of the system's registry hives that were created after the first successful startup of Windows XP.

WARNING : Although data should not be affected by the following procedure, you may need to restore changes you previously made to programs or system settings since the first time you successfully started Windows XP.

To replace the damaged registry hive and restore the backup copy of the hive from the Repair folder: Start your computer to the Recovery Console.

Determine if the file that is mentioned in the "Symptoms" section of this article is present, and if it is, rename it:

In Recovery Console, change to the c:\Windows folder.

Type cd sytem32\config , and then press ENTER.

Type dir system , and then press ENTER.

If you cannot run the preceding command successfully (because the file is missing), skip to step 3. If you can run the preceding command successfully, type ren system system.bak , and then press ENTER.

NOTE : If the message that you received referred to the software file, replace "system" with "software" in the preceding command. For example, you would type ren software software.bak (instead of ren system system.bak ), and then press ENTER.

Type copy c:\windows\repair\system , and then press ENTER.

NOTE : If the message that you received referred to the software file, replace "system" with "software" in the preceding command. For example, you would type copy c:\windows\repair\software (instead of copy c:\windows\repair\system ), and then press ENTER.

You should receive a "One file copied" informational message. For additional information about how to use Recovery Console during startup, click the article number below to view the article in the Microsoft Knowledge Base:
Q307654 HOW TO: Install and Use the Recovery Console for Windows XP


IMPORTANT : If you encounter problems when you run the preceding commands, you may need to use the Change Directory command ( cd ) one folder at a time before you run the preceding commands. For example, type cd system32 , press ENTER, type cd config , and then press ENTER.

Type exit , and then press ENTER to quit Recovery Console and restart the computer.

Oct 23, 2007 | PC Desktops

Not finding what you are looking for?
PC Desktops Logo

Related Topics:

75 people viewed this question

Ask a Question

Usually answered in minutes!

Top Compaq PC Desktops Experts

joecoolvette
joecoolvette

Level 3 Expert

5660 Answers

Michael Thomas
Michael Thomas

Level 3 Expert

3051 Answers

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers

Are you a Compaq PC Desktop Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...