Question about D-Link AirPlus Xtreme G DI-624 Wireless Router (DI624RE)

2 Answers

Cannot connecxt to router

Cannot connect to router using Admin as user and Admin as passwowrd. I have tried using the password I gave when setting up and it will also not connect.

Previously I could use my laptop and get in while in another part of the house.

Posted by on

2 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Sergeant:

    An expert that has over 500 points.

    Novelist:

    An expert who has written 50 answers of more than 400 characters.

  • Expert
  • 166 Answers

If you cant get in with the default password, maybe you have changed it. Reset the router, should be a reset hole on the back, stick a pencil or paperclip or anything that fits in there. hold it down for 30 seconds or so and the router is reset back to factory default

Posted on Aug 23, 2008

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Sergeant:

    An expert that has over 500 points.

    Champion:

    An expert who has answered 200 questions.

  • Expert
  • 317 Answers

Use :
User: Admin
Pass: admin
password is lowercase

Posted on Aug 23, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I had someone set up my new NetGear Router, but the said the User name was blank and gave me the password, but I can't access the intranet settings without a use name. Can I reset this myself? I...


Connect your router to computer with ethernet cable then you can access it with following default link. http://192.168.1.1 or http://192.168.0.1 or http://192.168.15.1 or http://192.168.2.1 If you are not able to access it with above ip then check your computers ip address gateway ip is your router ip try with it. Then it ask for user name and password. Type user as "admin" and password as "admin" or "password" or blank. Then you can see configuration page of router. If you are still not able to access router with above ip then you need to RESET it for that press RESET button for 10 seconds it is in back side of router then all settings defaults..Then you can access it with above method. . Then click on wireless->wireless security->WEP security there is code password note down it or enter new password then save setting s and restart router. then you can connect wireless with new password. Let me know if you need further assistance. Thanks for using FixYa.

Jul 16, 2011 | NetGear WGR614 Wireless Router

1 Answer

Establishing a password for a linksys router


Most Linksys routers can be accessed using your web browser by typing this into the address bar (Hook your computer into the router using an ethernet (network) cable):

192.168.1.1

Here are a few typical login passwords to try:

User: admin
Password: password

User: admin
Password: admin

User: (leave blank)
Password: admin

User: (leave blank)
Password: password

Once you are logged into the router, you can visit the settings page to change the login password, or the Wireless Security page to change the wifi password.

May 05, 2011 | Computers & Internet

1 Answer

How do I set my admin pass code


Connect your router to computer with ethernet cable then you can access it with following default link. http://192.168.1.1 or http://192.168.0.1 or http://192.168.15.1 or http://192.168.2.1 If you are not able to access it with above ip then check your computers ip address gateway ip is your router ip try with it. Then it ask for user name and password. Type user as "admin" and password as "admin" or "password" or blank. Then you can see configuration page of router. If you are still not able to access router with above ip then you need to RESET it for that press RESET button for 10 seconds it is in back side of router then all settings defaults..Then you can access it with above method. . Then click on wireless->wireless security->WEP security there is code password note down it or enter new password then save setting s and restart router. then you can connect wireless with new password. If you want to set admin password of router then go to system settings in router and configure admin password. Let me know if you need further assistance. Thanks for using FixYa.

Feb 14, 2011 | Computers & Internet

1 Answer

Hello where can i know my user name for DSL-2640T ? I NEED IT !! PLEASE CAN U HELP ME


Hi

There is 2 Usernames when it comes to Routers.

1st is the USERNAME and Password you use to get into the Router configurations which is the following.
Username: admin
Password: admin
The above username and password is the Factory setting and only the password can be changed by an user. SO if it was not changed the password will still be admin or you can reset the modem to reset the password back to admin.

2nd is the Username and Passsword you get from your Internet Service Provider which usually is the email address and whatever password you gave them to set your internet up

Feb 04, 2011 | D-Link AirPlus DI-524 Wireless Router

2 Answers

My friend gave me a linksys wireless -g 2.4 ghz speed booster router but need a password and he cant figure it out?? what do i do ?


Connect your router to computer with ethernet cable then you can access it with following default link. http://192.168.1.1 or http://192.168.0.1 or http://192.168.15.1 or http://192.168.2.1 If you are not able to access it with above ip then check your computers ip address gateway ip is your router ip try with it. Then it ask for user name and password. Type user as "admin" and password as "admin" or "password" or blank. Then you can see configuration page of router. Then click on wireless then wireless security then WEP note down that password it is your password to connect wifi. . Let me know if you need further assistance. Thanks for using FixYa.

Sep 11, 2010 | Linksys Wireless-G Broadband Router

1 Answer

I have switched from cable to AT and T for internet service. I want to use theLinksys I had been using with cable to go wireless. but I don't know how to do it. Also. I don.t know the password.


Reset your router to manufacturer's settings by pressing with a small pin the hole found at the rear of the router. It is labeled "reset".

When the router is reset to default setting, connect the router to a computer and visit http://192.168.1.1 to configure it. By default, username = admin and password = <blank> or no password. If no password don't work, try the password "admin". So username = admin and password = admin.

You you reach the configuration field, you need to enter the configuration settings provided by your ISP (AT&T) to connect to their internet services. Most likely, you will be using a dynamic IP address (DHCP Enabled) for home users or a static IP for business users. But these information you can get from AT&T.

When all is set, try connecting to the internet and try if your wireless router is broadcasting wifi.

Jun 11, 2010 | Linksys Wireless-G Broadband Router

2 Answers

Will not let me into router. only have an option for password and nothing works. tried resetting to default and it still doesnt work


are you trying to access the router set up ?
First make sure that your computer will be connected to the router with the ethernet cable.
Now check the IP address and Default gateway on the computer. Default gateway will be the IP address of the router.
When you try to access the router it will always ask you for the password.
Try the default user name = admin and password = admin
or try user name = blank ( do not type anything), password = admin.
if that is not working then the password of the router must be changed.
try some different password that you use most often.
If that doesn't work then you will need to reset the router and reconfigure the router.
once you reset the router , you will loose all the settings on the router.
Reset the router for 30 seconds. unplug the power. plug it back in. wait for 1 minute and try to open the page again.
Click Here to know more about how to reconfigure the router

Nov 17, 2009 | D-Link GamerLounge DGL-4300 Router...

1 Answer

Password


Press the reset button on the back for around 45 seconds, wait for the router to start up (around 3 minutes) then connect your computer and login with the default username admin and password admin. Make sure your computer is set up to automaticly aquire a ip address and point your browser to http://192.168.0.1 to log in and set up the router. The user manual for your router can be found here

Jan 15, 2008 | Actiontec GT704WG Wireless Router...

Not finding what you are looking for?
D-Link AirPlus Xtreme G DI-624 Wireless Router (DI624RE) Logo

Related Topics:

73 people viewed this question

Ask a Question

Usually answered in minutes!

Top D-Link Computers & Internet Experts

Prashant M
Prashant M

Level 3 Expert

2259 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18333 Answers

Mike

Level 3 Expert

4332 Answers

Are you a D-Link Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...