Cp2320 mfp printing blank pages. - HP Laserjet CM2320nf All-In-One Color Printer

Does it do this on all jobs? If yes, look for a function either in the general setup of the device or the driver for job separation. Having this function on causes the printer to print a blank page between print jobs to help separate them. This not to be confused with the job separation function of the 3 bin sorter where print, fax and copy jobs come out in different bins.

Are you setting this up for the first time and the pages are coming out blank, or have you been using this and all of a sudden, you have blank pages coming out?
In the meantime, take a look at link and let me know if the steps help to resolve your issue.
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01760759&tmp_task=solveCategory&cc=us&dlc=en&lc=en&product=3811337

Thanks,
HP Printer Support

I will do first a full printer cleaning, that mean take off all dust and anything can that can be inside the printer (ex.bugs and dirt accumulation).
Second try to locate the printer rollers and check if they are in good condition.Printer rollers need to be in good condition because those are the parts that move the paper inside the printer.
Also when you feed the papers into the feeder make sure you air the paper so they don,t stick together.

Are you checked cartridge contacts left side of the cartridge bank, you can observe three flexible plastic shells representing the contacts to cartridge,, check them there is the problem....

Hi my hp cm2320 nf prints normally and prints when you press the color copy button. But it will printout only blank page swhen you copy black&white. You press the black&white copy button only blank pages come out. Any help

Lang Dibba, Gambia

Hello,

check the size of the pages you are printing: if you are printing A4 on letter, as the set page is too small, the printer takes two.

Good luck !

if you are tec guy?
do half test page test find any image created on catridge drum, if no image found then
Check laser scanner assembly shutter fully operating or not while catride access unit closed, if unable to check, remove the shutter from laser scanner assm
Increase toner density
set factory settings,
If image on drum no print on paper, check transfer roller, contacts, if dirty replace T.roller, no result replace Power supply board..

Usage page
Shows a page count for each size of
paper printed, the number of one-sided
(simplexed) or two-sided (duplexed)
pages, and the average percentage of
coverage.
1. From the Home screen, touch Administration.
2. Touch Information.
3. Touch Configuration/Status Pages.
4. Touch Usage Page.
5. Touch Print

- can you print on this MFP..? if not then you got a printer problem, toner, etc.
When they fax you -does your MFP pick up the line- you should notice this activity, if none then you got a phone line problem most likely

take the cartridges out and put it back in and see if it works