Question about Haier 42EP24S 42 in. EDTV-Ready Plasma Television

1 Answer

Haier 42EP24S I have no picture or sound. When I power up the set I hear a relay or switch click or close and about 1-2 seconds later it clicks off or opens. Any help or suggestions will be greatly appreciated.

Posted by on

  • Anonymous Dec 01, 2008

    i have the same thing can any one help thanks

  • Anonymous Dec 01, 2008

    I have the same issue. I need the # for Rich-Tech to order the part. Would some please post the phone #?

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 26 Answers

Welcome to the club.

Repair kit TV-3940-01 will solve the problem. Unfortunately is is very difficult to find.

Rich-Tech has a kit (6871VSNB03E) that replaces the three boards but it does not include the EEPROM. I do not know how long the repair will last if the EEPROM is not replaced as part of the repair.

Posted on Nov 16, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

No picture on my philips 42PF7321D/37


Bad caps in the power supply must be replaced .

Jul 21, 2009 | Philips 42PF7320A 42 in. Plasma HDTV

1 Answer

No picture or sound


1. Check All Voltages From the Power Supply
2. Check The Fuses on The Y-Systain and Z-Systain Modules
If all the Voltages from Power supply are good and no Blown fuses i would go with Y-Systain first. 75% of cases fixed with Y
Systain Module

Mar 14, 2009 | Haier 42EP24S 42 in. EDTV-Ready Plasma...

1 Answer

Startup Problem with my 42pf7321d/37 Phillips plasma TV


I need to know how long do you have the tv?In the other word,approx. how many hours you have put into it?
Secondly,did you wall mounted the tv or setting it close the the area which there is not much room for the back of your tv to breath?
solutiondoct

Nov 06, 2008 | Flat Panel Televisions

1 Answer

Haier 42EP24S


Replace vodio board check power supply board ok

Aug 23, 2008 | Haier 42EP24S 42 in. EDTV-Ready Plasma...

1 Answer

Haier 42ep24s


Manuals on the way via email

May 23, 2008 | Haier 42EP24S 42 in. EDTV-Ready Plasma...

1 Answer

Black screen


Had the same problem. Purchased Haier 42" model 42EP24S from Sears and it broke in 1 1/2 years. Couldn't find anyone to fix it so I ordered part Service Kit: TV-3940-01 from www.searspartsdirect.com the cost was $150.00. If your warranty is up and you're okay with doing your own work. :-)

Replaced 3 boards (instruction included) and my tv is back in action.

May 09, 2008 | Haier 42EP24S 42 in. EDTV-Ready Plasma...

2 Answers

Haier TV model 42HP25BAT


Harish.......If you've lost both audio and video you'll probably need the upgrade kit. If it were just video you could get by for sometime with replacing the slow blow fuse on the s-zus board. Check your eprom chip on the digiatal board to see if it appears burnt. If so it may have fried. If you'd like the service manual I'll need your email address

Apr 15, 2008 | Haier 42EP24S 42 in. EDTV-Ready Plasma...

1 Answer

Haier LCD TV


Follow these instructions to the "T". On step 13 use factory on the right menu block instead of the left.
The procedure resets your monitor to factory setting on the boards an eeprom. It may or may not work if you have a bad component.
1. Using the Volume button (Remote or Monitor) turn the volume all the way down.
2. Hold the Menu button on the Monitor.
3. Press the Menu button on the Remote.
4. Press and hold the Volume button on the remote for 5 seconds and then release the Menu button on the Monitor. After this step the date will appear on the left side of the screen within 10 seconds.
5. Click the Menu button on the remote.
6. Click the Left Arrow button on the remote.
7. By using the Down Arrow button, scroll to Settings and then click the Left Arrow button.
8. Highlight "Eepreset" and click the Left Arrow button. (The monitor will turn off at this time)
9. Push the Power button on the remote, the unit will turn back on.
10. Click the Menu button on the remote.
11. Click the Left Arrow button on the remote.
12. By using the Down Arrow button, scroll to Settings and then click the Left Arrow button.
13. Highlight Factory and click on the Left Arrow button to select "Off"
14. Click Menu on the remote.
15. Click Menu on the remote.

Apr 15, 2008 | Haier 42EP24S 42 in. EDTV-Ready Plasma...

5 Answers

TV-3940-01 upgrade kit ordered. What about power supplies?


i have same problem with my plasma, haier was absolutly no help. could you email me tech manual and instructions for upgrade kit. thanks

Apr 11, 2008 | Haier 42EP24S 42 in. EDTV-Ready Plasma...

Not finding what you are looking for?
Haier 42EP24S 42 in. EDTV-Ready Plasma Television Logo

Related Topics:

124 people viewed this question

Ask a Question

Usually answered in minutes!

Top Haier Flat Panel Televisions Experts

Jaime Hernandez

Level 3 Expert

2267 Answers

The Knight
The Knight

Level 3 Expert

68153 Answers

CoppellTVRepair.com

Level 3 Expert

749 Answers

Are you a Haier Flat Panel Television Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...