Question about Maytag Neptune MAH7500WH Front Load Washer

1 Answer

Mah7500aww when I touch it I hear nothing I see nothing its just DEAD

Posted by on

  • 1 more comment 
  • aamana55 Aug 23, 2008


  • aamana55 Aug 24, 2008

  • aamana55 Aug 28, 2008

    At this time I feel I can't trust Maytag's products. That replacement control board was going to cost no less than $360.00+. I read the blogs and the outlook does not look good for these machines. I don't wast to buy another board in two years or so. I have lost confidence in this washer and its manufacture. The control info was good thanks. For the first time in my life I'm going to try what Consumer Report likes based on there testing. The new machine coming cost $899.00 If I half to pay $500.00 for peace-of-mine so be it. I thank you for the on line help. It did help.


1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 10 achievements.


    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 770 Answers

Post your email i will send you the test procdure

Posted on Aug 23, 2008

  • Gary Davd
    Gary Davd Aug 25, 2008

    check your email


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

2 Answers


what it sounds like is the drain from your house wher the washing machine drain hose hooks into is daraining slow so after it spins and pumps the water out the pump shuts off but the drain hose is syphoning the water back into the machine,theres probally lint built up in your drain pipe

Jul 09, 2008 | Maytag Neptune MAH7500WH Front Load Washer

1 Answer

Mah7500aww washer will not start. Washer display says that one or more of the keypads appear to be stuck...icahn get the washer to start sometimes after pushing ok then start after display warning ap

This could be a Control Board failure. I would try to recycle 120VAC power to the washer. Leave it off of about 20 minutes then re-power up. If that doesn't clear the issue then I believe your Control Board has failed. Do you have surge protection at the washer 120VAC outlet? Have you had any recent lighting storm activity? The Control Board is under warranty for 5 yrs from date of purchase.
If it is out of warranty, then here is a link to the new control board.

Oct 16, 2012 | Washing Machines

1 Answer

I need owners manual for maytag washing machine modile mah7500aww. Maytag web site has parts repair list pdf. only.

i am not finding a link on for that manual. However here is where ya can go for a very good setcion by section breakdown of part numbers complete with drawing


Aug 20, 2011 | Washing Machines

1 Answer

My washer just stopped during the wash cycle and responds to nothing ! I checked power (at the wall outlet) and also the lid switch (it makes the clicking sound but does nothing). Any idea on what to even...

Might be a bad capacitor. Do you hear a hum? Dead in the water? I recently worked on one where the capacitor simply fell apart. I had a couple of old ones laying around and put one on there and she came to life. You can't hear the timer? That is a sure sign the molex block could have backed out with vibration I have seen that. Got a model number? You might get a better answer.

Get a free service manual HERE

Dec 13, 2010 | Whirlpool Washing Machines

1 Answer

My Neptune washer MAH7500AWW says that the washer won't lock to work. It does this on and off. How do we fix it?

You may have to change the wax motor (lock) on it. Before you door so though check the board in the control heading for a burn mark on the R34 resistorwhich is located near the middle of the board. If its burnt change both parts out or it will keep doing the same thing.

Nov 02, 2010 | Maytag Neptune MAH7500WH Front Load Washer

1 Answer

Black scum buildings up at front gasket

u can leave door open for awhile to air out and buy some cleaner for it . its called affresh

May 17, 2009 | Maytag Washing Machines

3 Answers

Maytag Neptune MAH7500AWW Speed Indication Error - Won't spin up...

Sorry, I cannot solve this. I just wanted to post a couple of useful tips for anyone else out there who happens to be diagnosing their MAH7500AWW.

1. You can put the washing machine into service mode by pressing the <back> and <help> buttons for 5 seconds and then releasing.
2. There is a large folded troubleshooting schematic located under the top console. You have to remove a few screws and lift it up to pull it out.

Sep 19, 2008 | Maytag Neptune MAH7500WH Front Load Washer

1 Answer

Control board

have you the touch onsole first to se if it was ok there have been more problems with tha then the cpu board? do you get any beeps while touching it??

Aug 23, 2008 | Maytag Neptune MAH7500WH Front Load Washer

Not finding what you are looking for?
Maytag Neptune MAH7500WH Front Load Washer Logo

Related Topics:

209 people viewed this question

Ask a Question

Usually answered in minutes!

Top Maytag Washing Machines Experts

Richard Roth
Richard Roth

Level 3 Expert

9472 Answers

Bill Long

Level 3 Expert

587 Answers

John Tripp
John Tripp

Level 3 Expert

4636 Answers

Are you a Maytag Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides