Question about Washing Machines

1 Answer

I have kodak easyshare v1253 camera my computer will not let me burn to cd disc my previous easyshare camera did

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 10 achievements.


    An expert that got 5 achievements.


    An expert whose answer got voted for 500 times.

  • Master
  • 1,462 Answers

Why on earth is this posted under washing machines??

Posted on Aug 23, 2008

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Indesit WIDL86 The temperature during washing does not function. When a previous wash load was set on 60 degrees it was heated up so much that a burnt smell was emitted. Now the temperature button does not...

First place to check after you disconnect from mains is remove top cover and inspect and sniff control should not emit burnt smells or show burn marks...inspect wiring loom off panel and see if any damage has occurred.finally you need to inspect the heating element itself which rarely fails or burns out. By looking from bottom area of drum...again you are looking to find telltale signs.if it is the controller ....these are often on eBay sold as replacement boards .i must warn you that there is no guarantee that this will mend the problem as a short seems to be more likely...possibly due to water ingress or damp environment condensation on the pcb due to some sort of internal leak etc.and this needs to addressed to prevent repeat of same problem.

Feb 07, 2015 | Indesit Washing Machines

1 Answer

Took about 10 pictures today without realizing disc wasn't in camera. How can I get them on disc to print or send emails?

How do you normally download your pictures?

If you do it by connecting your camera to your computer, simply remove your memory card before making the connection. If you do it by putting your memory card into a card reader, first use the "Copy to Card" command in the playback menu to copy the pictures from the camera to the memory card.

Sep 27, 2013 | Samsung Washing Machines

2 Answers

Falshing f05 hotpoint wdf 740

The fault is associated with drain out (pump blocked or restricted in some way). Try to clean it or contact Hotpoint support

Sep 25, 2013 | Hotpoint Washing Machines

1 Answer

I accidently washed a large load of laundry without switching from previous small load selection; now washer has burning smell and wont work??

probably broke the motor coupling, it's made of rubber and plastic,when machine is out of balance it breaks, if you turn it on agitate or spin and you can hear the motor running but nothing spinning then it has broken, part cost about 20 bucks Try

Jan 31, 2010 | Amana 3.2 cu. ft. Top-Load Washer

1 Answer

My mac wont recognize blank cds

I don't know about mac's, but if there is a way to set the device to be able to burn, it may be that it got changed somehow. check that... btw, you listed this in the wrong listing.... try puttin this under "Computers" for a better answer


Aug 31, 2009 | Kenmore 22422 Top Load Washer

1 Answer

Kenmore washer has burning smell and smoke

It appears your clutch assembly has failed in this instance.

For replacement parts - head on over to or and enter in your full model number for a full parts listing.
I recommend both sites because ...

FixYa has no affiliation with either site - I have been using and recommending them for years - trouble free.

PartSelect has a great schematic database for locating the part on your unit and great "testimonials" for each part that often times includes HOW-TO information.
RepairClinic has pictures of each part they sell and also a great how-to and troubleshooting for basic repairs.

If your unit has never been serviced - there should still be an original service manual enclosed in plastic taped to the inside of the shell.
In the service manual are Error codes, maintenance procedures, and troubleshooting steps you can follow.

Anything too complicated or beyond your scope should be handled by a professional.

If you think you want to tackle the repair - and have gotten stuck on a step - reply to your question and I will be glad to help you out.

Thanks for using FixYa - a 4 THUMBS rating is appreciated for answering your FREE question

Jun 11, 2009 | Kenmore Washing Machines

1 Answer

Malber 1000 Washer Dryer--Dryer doesn't heat

If this is still a problem, where is the red wire attached. Can you send a photo?

Jan 31, 2009 | Malber WD1000 Front Load Washer/Dryer

1 Answer

Error F 04

im not up to speed with the codes. BUT if you are able to open the door this suggests the bulk of the water has pumped away, so I suspect motor or belt problems. Can you hear the motor spinning when it should be? ie on spin cycle. If not suspect carbon brushes in motor, or even a broken/burned out wire to motor. Replace belt if broken

Oct 15, 2007 | Hotpoint Aquarius WD640 Front Load...

1 Answer

Service mode diagnostics error after repair

can be still the board that has been replaced has some boards can have faults from new but what can be wrong is that most motors have carbon brushes which go into the motor at either side of the motor with 1wire going onto them if these are low then the motor doesnt have enough contact with them so it wont spin properly pull these out and check first but be warned if the washer is under warranty you can void the warranty by letting anyone touch it m8 let me know how you get on and if no help then ill think what else it could be m8

Sep 12, 2007 | GE WPGT9350C Top Load Washer

Not finding what you are looking for?
Washing Machines Logo

Related Topics:

33 people viewed this question

Ask a Question

Usually answered in minutes!

Top Washing Machines Experts

Dan Webster
Dan Webster

Level 3 Expert

8147 Answers

Richard Roth
Richard Roth

Level 3 Expert

9472 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Are you a Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides