Question about Dell 924 All-in-One InkJet Printer

1 Answer

Dell all in one 926 printer

My problem is there is a plastic band in my printer that came off. I think it keeps the print cartriges from hiting sides in printer. How do i get it back on. Thanks

Posted by on

  • Tip40 Aug 27, 2008

    The plastic strip came off that stops the ink cartridge from hitting the side of the printer. It's just on long plastic strip, how do I put it back on?

  • rjaime1992 Oct 24, 2008

    a thin grey strip that connects to my ink cartradge came out and now my printer is not working



1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert that gotĀ 5 achievements.


    An expert whose answer gotĀ voted for 20 times.


    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 98 Answers

Its a very important part of the printer .that band is called the bar encodder strip.if its broken from its ends it is to be replaced or if just moved out of the printer but looks proper then you have to open the printer and refit it.there is a space for thet strip behind the back of the cartridge carriage from where it should pass while you fit it again.


Posted on Oct 23, 2008


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Not print magenta or yellow

If you use CISS system. The problem may occur CIS. To solve these follow this proces:
1. put out cartrige from cartrige carrier
2. put a plastic seringe into the hole of the cartrige and try to out the ink from inside the cartrige ( mainly magenta or yellow)
3. Then run a head clean.
If result is No Try these:
1. Put off cartrige from cartrige Carrier
2. find out 4/6 stick inside the carrer
3. put a plastic seringe one after and push air on it.
4. After that take a seringe with ink and push it gentally into the stick.
I think you will be rid from your problem.
Thank you.

Jun 02, 2013 | Dell p713w AllInOne InkJet Printer

1 Answer

I want step by step instructions for replacing the ink cartriges on my 926 Photo Printer.


OK, in the manual there is a step by step guide on replacing the cartridge.

Click HERE to download the manual.

Kind regards

Aug 29, 2010 | Dell 926 All-In-One InkJet Printer

2 Answers

Nothing will print for me but it says its all hooked up properly, saying i have no ink even thought their brand new cartriges

I know I have been running mine with no ink for two months and they were brand new. Do not believe the software messages until you actually run out of ink. Keep spares on hand, that is what I do.

Jul 26, 2010 | Dell 926 All-In-One InkJet Printer

1 Answer

Refilling a dell cartrige 926 all in 1 printer

look on page how to
or google how to refill cartridge

Oct 04, 2009 | Dell 926 All-In-One InkJet Printer

1 Answer

How do I find and replace ink cartrige?

Raise the lid (scanner lid and the part just below) and the print cartridges will move into a location to be replaced.

Sep 01, 2009 | Dell 926 All-In-One InkJet Printer

1 Answer

I keep getting the " covers open " on my dell 926 printer. help

sensor or switch not working or sensing find and figure out why not working maybe dirty blow out with compressed air!!!!! :)

Jul 06, 2009 | Dell 926 All-In-One InkJet Printer

1 Answer

Dell 926 injection refill kit didnt work

The ink your purchased is likely a cheap watered down version of what your printer is meant to take. You may notice that the ink smears when you rub the page directly after printing. Why you chose to use the blue and red ink to make black blows my mind. These refill kits are insanely cheap and buying the black could not have been much more. Not using black ink in the black cartridge would explain why your print is faded. Also, there is no way to reset the ink levels on this type of cartridge. As long as the printer still prints, just ignore the ink level indicator and print until the ink runs dry. I recommend Cartridge World for ink refills because they use high quality ink to manufacturer specified volumes while still saving you money.

Feb 05, 2009 | Dell 926 All-In-One InkJet Printer

Not finding what you are looking for?
Dell 924 All-in-One InkJet Printer Logo

Related Topics:

37 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dell Office Equipment & Supplies Experts


Level 3 Expert

2237 Answers

The Knight
The Knight

Level 3 Expert

75289 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

Are you a Dell Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides