Question about Toshiba 65H84 65" Rear Projection HDTV

1 Answer

Toshiba 65inch rear projection distorted video

THis morning it has distorted video in the lower left section, almost like a wave.

Posted by on

  • Jackman96 Oct 18, 2008

    Recently I have noticed that when I turn the power on with an SD source that I get distortion throughout the whole screen. If I change to an HD source the picture is fine. If I switch back to the SD channel it is distorted again. I have not diagnosed it yet to see if it is the cable box or the TV.

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Toshiba Master
  • 3,459 Answers

Projection TV sets need to have all three colors - RED - BLUE - GREEN - lined up correctly on the screen in order for the video to look normal. When its out of alignment the video will look 3D, wavy, distorted, etc. Most of the time you just need to adjust your convergence in the TV menu. If you cannot adjust it in the menu - then your convergence is broken and needs to be repaired.

This is a very common failure on these projection sets and a fairly simple DIY fix. All projeciton sets including Samsung, RCA, Sony, Philip Magnavox, Panasonic, Pioneer, Akai, GE, JVC, Toshiba, and others at some point will have the same problem.

Common Symptoms include....

  • Screen looks 3D
  • Colors don't line up
  • One or more colors can't be adjusted when using the convergence menu.
  • Screen is bowed or warped.
  • TV shuts off after powering on. Power light will blink. TV may also make a chirping noise.
Here are some photos of convergence problems.

toshiba 65inch rear projection distorted video - 42d3683.jpg

7859toshiba 65inch rear projection distorted video - e87380c.jpgass=

e87380c.jpg
Here is a quick test....

Using your original remote go-to the settings menu then goto the convergence section.

Try to adjust the red and then the blue convergence.

You should be able to move RED and BLUE in all directions - up, down, left, and right. And you should be able to get the grid straight.

If you can't move them in all directions or cant move them far enough your convergence chips are bad and should be replaced. This is a common problem.

Note: If you TV has as flash focus or magic focus button only try pressing the button. If ittoshiba 65inch rear projection distorted video - 69189a5.pngix the convergence your need to fix it. See below for a fix

69189a5.pngCONVERGENCE SOLUTION

You will need to replace the convergence chips and possibly some convergence resistors and pico fuses.
This is a a fairly easy DIY job if you are handy and can follow directions. You can get complete repair kits from TvRepairKits.com or click here. They have put together DIY repair kits that include the OEM parts and step by step photo instructions for each repair. If you are not handy or can't follow directions we would suggest calling a shop.

Posted on Jul 03, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

There is a wave in the picture only in the upper left hand 1/4 or the screen. The rest of the screen is sharp. You get the colors separated and thus double image.


Projection TV sets have several common problems listed below.

Problem #1) Convergence

Symptoms:

  • Screen Looks 3-D
  • Colors wont align
  • Screen may look distorted
  • No Audio/Video - makes a chirping sound.
Example Photo:
5f6e85c.jpg
Problem #2 CRT Fluid has clouded over.

Symptoms


  • Dull Video, Washed out
  • White/Bright looking video
  • Halos around objects
  • Red/Orange looking
Example Photo:
ee1ca68.jpg

You can see more examples and find a fix here...

bb0cf99.pnghttp://www.fixya.com/support/r2861467-solution_video_looking_whiteish_dull

Mar 23, 2010 | Hitachi 46F500 46" Rear Projection...

1 Answer

Top third only of picture is distorted. It waves in and out and people look like aliens! Worth trying to fix?


Projection TV sets have several common problems listed below.

Problem #1) Convergence

Symptoms:

  • Screen Looks 3D
  • Colors wont align
  • Screen may look distorted
  • No Audio/Video - TV makes a chirping sound.
Problem #2 CRT Fluid has clouded over. Symtoms
  • Dull looking video
  • White looking video
  • Halos around objects
  • Red/Orange looking video

You can see some examples and find a fix here...

bb0cf99.pnghttp://www.fixya.com/support/r2861467-solution_video_looking_whiteish_dull

Mar 05, 2010 | Mitsubishi VS-60609 60" Rear Projection...

1 Answer

There is a wave (color change) on the upper left hand corner of


Convergence is dead.Know how to solders?Must replaced the 2 convergence ICS,and all it resistors to solved this problems.Buy a convergence kit to fix it ur self.Tries Tv repair World.com,Tvrepairkits.com for the convergence kit.The shop will cost U $300 for parts and labors.

Feb 06, 2010 | Mitsubishi WS-65809 65" Rear Projection...

1 Answer

Picture has a "wave" along the sides


I have the parts, very cheap. hill6399 at yahoo.

May 21, 2009 | Toshiba TP55H60 55" Rear Projection...

1 Answer

Double images


Convergence amps bad call a tech make sure he does'nt use generic parts A Toshiba service center should know what to do around 300.00

Apr 12, 2009 | Toshiba 50H82 50" Rear Projection...

1 Answer

There is a arch at the bottom going to the left


Covergence needs to be fixed replace Both of your ICs they are big black ICs with STK on them for example STK392-110 if this the # on yours use 180s better ics.For parts Call 1-800-223-3205 www.electronix.com.

Dec 26, 2008 | Toshiba 57H82 57" Rear Projection...

1 Answer

Toshiba 50H81 projection television


Projection sets have two very common problems.

The first common problem is convergence


These sets need to have all three colors - RED - BLUE - GREEN - lined up correctly on the screen in order for the picture to look normal. This is called convergence.

When its out of alignment the video will look 3-D, wavy, distorted, etc. Most of the time you just need to adjust your convergence in the menu. If you cannot adjust it in the menu - then your convergence is broken and needs to be repaired. Convergence problems are very common on all Projection TV sets including Sony, Samsung,JVC,Philip Magnavox,Panasonic,Akai,Pioneer, Hitachi,Mitsubishi,Zenith and others.
You can get more information and a DIY convergenece repair kit with instructions from the link below.

Here are some of the most common problems with these sets...

*Screen Looks 3-D
*Colors wont align
*Screen may look distorted or warped
*No Audio/Video - TV Shuts down - May also make a constant chirping sound

Problem #2 - Another common problem is dull or washed out video.

Your set may have one or more of the following symptoms....

*Dull looking picture
*White looking picture
*Halos around objects
*Red/Orange looking picture

bb0cf99.pngYou can see some more examples and find a fix using this link on Fixya http://www.fixya.com/support/r2861467-solution_video_looking_whiteish_dull

Oct 22, 2008 | Toshiba 50H81 50" Rear Projection...

1 Answer

Red and green fuzzy waves across the screen


my screen just became distorted (red picturer to the upper right & green picture to the bottem left ? can you help me ? wuzuphippie55@yahoo

Sep 08, 2008 | Philips Magnavox 9P6034C 60" Rear...

2 Answers

Toshiba 50 rear projector tv


can you post a picture of what the picture looks like? I may be able to help if I can see what the picture is actually doing.

Jun 08, 2008 | Toshiba 50H82 50" Rear Projection...

1 Answer

43h70 theatherview hd ser 53704921


Convergence amp ic bad
http://home.earthlink.net/~oleg.filippov/ConvergenceFix.htm
http://cmpalmer.blogspot.com/2006/11/fixing-my-own-tv-part-ii.html
Sony Convergence
http://www.techlore.com/blog/entry/19694/Sony-Convergence-Repair-My-Sony-TV-has-a-distorted-picture-/
http://www.techlore.com/article/19631/Sony-Convergence-Procedure/

Nov 02, 2007 | Toshiba 43H70 43" Rear Projection...

Not finding what you are looking for?
Toshiba 65H84 65" Rear Projection HDTV Logo

161 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toshiba Projection Televisions Experts

Jaime Hernandez

Level 3 Expert

2267 Answers

Dave Naylor
Dave Naylor

Level 3 Expert

834 Answers

The Knight
The Knight

Level 3 Expert

68229 Answers

Are you a Toshiba Projection Television Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...