Question about HP Printers & Copiers

4 Answers

When asked to print my c5180 all in one ejects blank sheet of paper making no attempt to print

Posted by on

4 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 2,071 Answers

Just click below for more information;

When asked to print my - s.gif » Macintosh: All-in-One Ejects Blank Page or Pages in Mac OS X V10.4
Mac OS X V10.4: A blank page or pages emerge from the product when it is turned on. s.gif » A Blank Page Prints at the Beginning of Every Print Job ...
A blank sheet of paper prints at the start of every print job. s.gif » Load Paper
Instructions on loading paperWhen asked to print my - s.gifenvelopes. s.gif » When I Try Printing in Windows Vista, My Printer Is Not Available in the List of Printers ...
Windows Vista: The product does not appear in the printers foldeWhen asked to print my - s.gifn attempting to print on a network. s.gif » HP Photosmart C5180 All-in-One Printer: Manuals
... HP Customer Care | HP Photosmart C5180 All-in-One Printer | Product information HP Photosmart ... One Printer | Product information HP Photosmart C5180 All-in-One Printer: Manuals About these files: These

Hope this may help;

Regards,
VOTIT

Posted on Aug 28, 2008

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Master:

    An expert who has achieved Level 3.

  • Master
  • 623 Answers

Click start
right click my computer
hardware
device manager
?ports
scan for hardware changes action

Posted on Aug 23, 2008

  • ritchie dempacco
    ritchie dempacco Aug 23, 2008

    click start
    right click my computer
    properties
    hardware
    device manager
    ?ports
    scan for hardware changes action




×

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Genius:

    An expert who has answered 1,000 questions.

  • Master
  • 1,847 Answers

Try reset the printer setting then try.

Posted on Aug 23, 2008

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • HP Master
  • 13,433 Answers

Try uninstalling the drivers and software, unplug the printer from your pc, reinstall the software and plugin the printer when asked, that should solve it. if not drop me a line.

Posted on Aug 23, 2008

  • Ekse Aug 23, 2008

    you can also try a reset

    A semi-full reset will do the following:
    The user settings to the
    factory defaults, Language and country settings on some models, Fax
    logs, Fax headers, Fax speed dial information.

    Reset the All-in-One to the factory default settings by using these instructions:

    1. Unplug the power cable from printer when the printer is powered on and wait for 20 seconds.

    2. Then, press and hold # and 6 while plugging in the power cord.

    Continue holding until it displays Semi Full Reset message in the front panel of the All-in-One.


×

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

C5180 sounds like printing then jams


try aligning the heads, and cleaning ink cartridges

Nov 18, 2012 | HP Photosmart C5180 All-In-One InkJet...

1 Answer

Epson Stylus CX4800 prints blank pages


Alex_Garton:

I'm not familiar with the Epson Stylus printers, but I'm going to hazard a guess. If the paper does not move at all, the paper pickup feed mechanism is at fault. One of two methods is used to pick up the sheet. Either the front lower portion of the tray is lifted up to force the top sheet into the feed roller, or the feed roller is connected to a drop-swivel to drop the feed roller onto the top sheet of paper. You'll need to look carefully at the feed mechanism to determine if a gear or clutch is failing. If the paper moves into the machine about 1/2 inch and then stops, either the first paper feed roller past the pickup roller may be at fault. Also check to see if the paper sensor between the paper pickup roller and the first feed roller is working properly.

Sep 22, 2012 | Epson Stylus CX4800 All-In-One InkJet...

1 Answer

Sounds like it's printing, ejects the paper and it is blank. Help!!


Try the steps below to fix the problem:
  1. Remove the sheets of paper from the feeder.
  2. Open the printer cover and remove the cartridges.
  3. Close the printer cover.
  4. Re-brick your printer. Pull out the power supply, black box where the power cord is plugged in at the back of the printer, and put it back after 30 seconds.
  5. When the printer turns on, re-insert both cartridges.
  6. Close the printer.
  7. Load some paper in the feeder.
  8. Try to print again to verify that the problem is fixed.
Let me know how it goes.

Dec 05, 2011 | Lexmark X2500 All-In-One Printer

1 Answer

Reading no paper paper tray is full


Instructions
  1. Check the display for an error message. If the display reads "Clearing paper from printer," the engine has detected a jam and is attempting to eject the jammed pages automatically. These pages will often be blank.
  2. Check the display for "Performing PRINT/STOP TEST" or "Performing SERVICE TEST." Either of these messages indicates that the printer is going through a test procedure that may eject blank pages.
  3. Reduce the amount of paper in the input tray if the printer is feeding multiple blank sheets at a time. The printer will pull extra pages through if the input tray is overfilled.
  4. Replace the paper in the input tray with the correct size if needed. If the 4600 printer detects the paper as an incorrect size for the print job, it may eject the paper without printing anything on it.
  5. Replace the ink cartridges if certain colors are blank on the page. Replace the black cartridge if printing a black text document that is coming out blank. The printer may attempt to print even if the ink level is low or empty, but will unable to print anything on the page, causing it to come out blank.
  6. Remove the sealing tape from newly installed cartridges. The tape covers the print heads and should be removed before installing the cartridges. If the tape is left on, it will prevent ink from getting on the pages as they print.
  7. Press the "Check mark" button on the control panel to enter the printer menu. Run a diagnostic so the printer can attempt to determine the cause of the blank pages printing. Press the up or down arrow to select "Diagnostics." Press the "Check mark" button. Press the "Down" arrow to highlight "PQ Troubleshooting." Press the "Check mark" button. The printer runs a diagnostic and returns to a ready state when done.

Jan 08, 2011 | HP LaserJet 4600 Printer

1 Answer

When I print on my Canon MP730, it always prints out a blank page after every print job. How can I fix this?


SOLUTION(S): Reset the Sheet Feeder Gears
If the power fails while the paper is feeding or during a print job, the paper feed gears will lose their proper
alignment. The reason is that after the power is restored the paper feed gears will attempt to return to the
home position, which may not be possible if the paper stop cam is not in the correct position.
PROCEDURES
1. Remove the sheet feeder from the unit.
2. Remove the sheet feeder motor from the sheet feeder assembly.
3. Remove the drive gear from its spindle.
4. Realign the lifting tray gear and paper stop cam gear.
5. Reinstall the drive gear and sheet feeder motor.
6. Reattach the sheet feeder to the print unit.
7. Reassemble the unit.

Jan 11, 2009 | Canon MultiPASS MP730 All-In-One InkJet...

1 Answer

Extra paper pulled


Some rubber lining or rollers is out of line, if you can fix that it may work properly.

Oct 24, 2008 | Canon MultiPASS MP730 All-In-One InkJet...

1 Answer

Printing problem


try to check the level of inks.this maybe one of the reasons why the printer EJECTED blank print...

Aug 23, 2008 | HP Photosmart C6180 All-In-One InkJet...

3 Answers

Paper jam light is on


Hi! I have the same issue. The only solution I still use: select print from document with no paper in the hp's feeder. Let the printer go on "paper out" message, now put the paper into the feeder and press the print button on the printer. Success!

Oct 05, 2007 | HP Photosmart 7450 InkJet Printer

Not finding what you are looking for?
Printers & Copiers Logo

Related Topics:

324 people viewed this question

Ask a Question

Usually answered in minutes!

Top HP Printers & Copiers Experts

kakima

Level 3 Expert

96576 Answers

k24674

Level 3 Expert

7987 Answers

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers

Are you a HP Printer and Copier Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...