I put my codes on the action replay for pokemon white but when i hit start, it goes through the process but the screens go white and the game doesn't start. what is happening and how do i fix it?

I have a problem kinda like that. Ocasionally, when I boot up the action replay with a pokemon game, (It happened to me with white2 and conquest) it starts game and watch instead of the pokemon game. and it's like my action replay is sick of pokemon or something

Update your Nintendo DS action Replay to this version 1.71 and it will work the website you can get this at is http://uk.codejunkies.com/search/codes_search.aspx and on the right hand side you will find Help Pokemon Black And White, there you should find Action Replay DS Version 1.71 Firmware Update download it as an winrar then extract it to your desktop and drag the file over the bar with your action replay inserted in the code manager. When it has finished writing the firmware it will disconnect you from your computer and messege will come up saying 'Reboot your NDS now! you do that by switiching it off then when you switched it on it should say version 1.71, Insert Pokemon white after taking out the action replay then press start game when it comes up Nintendo That means it is working and there you have it you can play Pokemon White with codes and it doesn't freeze at all, So Enjoy.

well i think you have to research online for the id of pokemon pearl and put it in the action replay and put in some codes in and then try it.

P.S. if it still doesnt work send the action replay to datel.

k you know how its on the list of games what you need to do:
1:put your game in
2:if you look in the bottom left corner its got a code copy it
3:look for your game in the list
4:put the indicator on it but dont select it
5:instead of selecting it hit the pencil sighn on the touch screen
6:then it should show up like how you input ar codes . since its already got the name in it press next
7:erase the code thats already set in and change it to the one you copied down then svae changes and your done


hope this helps out

That's Easy. There's A master code you have to enter for the Game in your Action Replay. Go to Pokemon Platinum on The Games List of Your Action Replay. Then Click the Edit Button, But DO NOT change the Name. Just Click Next. Next It will Ask You to Enter New Game Id. Enter This Code: CPUE-3811DEF6 Then Click Next. Now you Should be Able to use your Action Replay for Pokemon Platinum. Enjoy.

I dont know how this worked but for me i had loaded every single cheat at once, that seemed to be the problem. once i put down only one or two cheats it worked fine.also know that some cheats are scams and wont harm your ds game but make the screen turn white and unable to load. be careful if you get the walk anywhere cheat you could get lost and the game would crash. to activate most cheats you press L+R but for some it is different and it will tell you what to do. my favorite cheat is this one:

94000130 fdff0000
b21c4d28 00000000
b0000004 00000000
94000130 feff0000
00000890 01ed0001
d0000000 00000000
da000000 00000892
dc000000 00024620
c0000000 0000000b
d7000000 00000000
dc000000 00000006
d2000000 00000000
it allows you to obtain 493 master balls. if you wanted a mew you would throw out 342 masterballs then hold L while walking in grass. i got 342 by subtracting 151 (mews number) from 493. the pokemon will be the level of the surronding pokemon in the grass. good luck and hope this helps

use less codes

You can't put an action replay with a TTDS in the same slot. The action replay cannot read all of the games the TTDS has.

I have a Action replay max for my GBA. it works for all my pokemon games, leafgreen, ruby and emerald but not fire red.
PLEASE HELP

You have a bad cheat or a wrong cheat enabled. That is why it's not working. Just disable that cheat and it should work fine.