Question about Hoover Washing Machines

1 Answer

Hoover Al 130 error 1 - Hoover Washing Machines

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Would'nt you like to know? If you pay me I will tell you!!!!!!!!!!!!

Posted on Aug 24, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

After starting briefly, why did it suddenly stop?


I know it is an old post but this will help the fault code lights 1 and 7

130. (10000010) Phase 1 to 6 - Single Rotor Position
Sensor Error
The Motor Control Module has found an error in the pattern received
from the Rotor Position Sensor. Likely causes of this fault are a bad
connection on the harness between the Rotor Position Sensor and the Motor Control Module, or a faulty Rotor Position Sensor.
Watch this video if you are good with fixing things
Fisher and Paykel 130 10000010 Error Code Fix

Jun 06, 2015 | Fisher and Paykel Washing Machines

1 Answer

Hoover washing machine showing H05 error


Error code: h05 coming up when i switch on the tumble - Fixya

www.fixya.com/support/t8443068-error_code_h05_coming
Feb 24, 2011 - Question about Washing Machines. Open Question ... SOURCE:Hoover washer/dryer VHW854D SHOWS ERROR. I have exactly the same ...

I have a 3 month old Hoover washing machine [DYN10146P ...

www.fixya.com > Forum > Washing Machines
Aug 11, 2011 - I have a 3 month old Hoover washing machine [DYN10146P] with aH05 fault. ... Have just looked in the service manual, it reads: Error 9 - Cancel the programme by returning the selector to the OFF .... show e-60 on screen.

Hoover and Candy Washing Machine Error Codes - YouTube

? 5:00
https://www.youtube.com/watch?v=kzhlvB2LjXg
Sep 1, 2014 - Uploaded by eSpares
Does your Hoover or Candy washing machine stops before .... I have a question: My Hoover displays the error code E08. what can I do to fix it?

Nov 18, 2012 | Washing Machines

1 Answer

What does Cold 130 mean?


Error code 130
130.
(10000010) Phase 1 to 6 - Single Rotor Position
Sensor Error
The Motor Control Module has found an error in the pattern received
from the Rotor Position Sensor. Likely causes of this fault are a bad
connection on the harness between the Rotor Position Sensor and the
Motor Control Module, or a faulty Rotor Position Sensor.
Primary Source: Wiring.
Action: 1. Check for corrosion on the edge connector of
the Rotor Position Sensor and the Motor
Control Module connector.
2. Check the contacts on the rotor positional
sensor end of the hall harness to see if any
have been damaged. (Each set of contacts in
the socket has two wipers. If the distance
between these wipers varies between
different contacts, replace the rotor positional
sensor harness.)
Secondary Source: Rotor Position Sensor.
Action: Check the Rotor Position Sensor with an R.P.S.
tester. Replace if faulty.
Tertiary Source: Motor Control Module.
Action: Replace Motor Control Module.

Sep 02, 2012 | Fisher and Paykel GWL11 Top Load Washer

1 Answer

Hoover AL 120 washing machine won't spin


i would check the motor carbons it could be your problem if it fills goes through the programme until the end but has motor action

Apr 12, 2010 | Hoover AL120 Front Load Washer

1 Answer

Need User Guide for Hoover washing machine


you can download manual from hoover.co.uk

Mar 27, 2009 | Washing Machines

2 Answers

My machine stops at "delay start", yet the cycle is not complete.


PROBABLY NOT USING ((((H E DETERGENT) REASON FOR ERROR CODES,, POUR A SMALL AMOUNT OF COOKING OIL ON A SPOON AND POUR INSIDE SHOULD SOLVE PROBLEM

Nov 29, 2008 | Hoover AAA160 Front Load Washer

2 Answers

Instructions for Hoover Washer Time 160E


i have a hoover soft wave maxi 1600 7.5kg AAA it spins and empty's and sometimes it don't what could be the fault

Nov 23, 2008 | Hoover AAA160 Front Load Washer

1 Answer

High vibration front loader


have u checked the bearings to do this u open the door place your palm on the front of the face panel and place your fingers on the inside of the drum and grab the inner drum and move your fingers towards your palm if there is movement then the bearings are gone and need replacing if there isnt then it could be the springs that are placed under the top they could be broken if not then replace your damper legs they may look ok but they will be down on pressure m

Mar 15, 2008 | Hoover AL130 Front Load Washer

1 Answer

Smell from tub


Does it the first time you have this bad smell and for how long do you use this machine in its cuurent location ? Try to run an empty machine cycle with a quart of vinegar to clean the tub and pump. Let me know if it solve your problem ? Good luck !

May 27, 2006 | Hoover H120M Front Load Washer / Dryer

Not finding what you are looking for?
Washing Machines Logo

Related Topics:

89 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hoover Washing Machines Experts

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Gerry Harvey
Gerry Harvey

Level 3 Expert

1456 Answers

Chris Hall
Chris Hall

Level 3 Expert

842 Answers

Are you a Hoover Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...