Question about Brother MFC 210C All-In-One InkJet Printer
Hey help me with my new problem i have brother mfc-210c and i already done fixed to my first problem which is "unable to clean" by just following some instructions on the experts her in fixya, but i had 2nd problem that my borhter mfc-210c can't print in black color...i dont know why but i already dont replaced a new original cartrideges on it and i sets all in possitions and im done cleaning on it by this following steps:
press menu then start mono (blue button). Then arrow0up button fourtimes.
Machine will be in maintaenace mode.
Press 7 & 6: display will be cleaning_all.
Press 3: power_p all.
Pres starts mono. Machine starts power cleaning.
After cleaning I press 0 to leave maintenance mode and then press 9 for printest sheet but it still no color black came out instead of light green but its super blurred that it can’t almost read to my eyes…I done a lot cleaning routine for the printheads but still no color black print when we received a fax or when we copy a documents in brother mfc-210c, I wonder how to fix this problem so I any little solution may a very big help for me! Please do a reply on my email: email@example.com. Thanks a lot!
First ensure that none of your inkjet cartridges are empty or near empty. The machine will not perform cleaning if any cartridge is too low on ink. If the conditions are met the machine at least attempt perform the cleaning function. There is no guarantee that the print quality will improve on the first try.
Posted on Sep 16, 2007
You are on the right way. Press MENU then the blue START MONO Button which normally starts copies in black and white modus. After that press the round button (which can be normally pushed to four sides l/r up/down) UP four times. Now you should be in maintenance modus. Follow the procedure as mentioned before. If there are more questions post it here.
Posted on Sep 29, 2007
SOURCE: Not printing
I tried pushing the menu button and the blue start button 4 x's. First the 4 buttons (photo/capture, copy, fax & scan lit up and started flashing and the printer went into maintenance mode, then the word copy 01/01 appeared and nothing happened. Then machine error code 4Fappeared. Does anyone have a clue what to do next? Mix-it-Up do you have any input?
Posted on Feb 28, 2008
Tips for a great answer:
Sep 08, 2009 | Brother MFC 210C All-In-One InkJet Printer
Mar 11, 2009 | Brother MFC 210C All-In-One InkJet Printer
Feb 17, 2009 | Brother MFC 210C All-In-One InkJet Printer
Jan 29, 2009 | Brother MFC 210C All-In-One InkJet Printer
Dec 29, 2008 | Brother MFC 210C All-In-One InkJet Printer
Dec 18, 2008 | Brother MFC 210C All-In-One InkJet Printer
Dec 03, 2007 | Brother MFC 210C All-In-One InkJet Printer
159 people viewed this question
Usually answered in minutes!