Question about GE JVM1650 1000 Watts Microwave Oven
Hi , we would like to ask how to install this microwave to the wall. all we have is the microwave :) and the long screws and a long bracket what attached to the bottom. should we have not any other parts to add to the wall? please help. thanks
Tips for a great answer:
May 18, 2012 | GE JVM1653 Microwave Oven
Apr 15, 2011 | GE JVM1653 Microwave Oven
Here is a tip that will help you to figure out what is wrong with your Microwave Oven....
Basic Microwave Oven Troubleshooting Tips
Feb 24, 2011 | GE JVM1653 Microwave Oven
Jul 06, 2010 | GE JVM1653 Microwave Oven
Apr 17, 2010 | GE JVM1650 1000 Watts Microwave Oven
Apr 09, 2010 | GE JVM1653 Microwave Oven
Feb 13, 2010 | GE JVM1653 Microwave Oven
Oct 25, 2007 | GE JVM1653 Microwave Oven
This is a due to a defective or possibly loose magnetron.
If yours has loose mounting nuts / bolts or the wire mesh RF gasket was not installed or got pinched, that can also cause this RF leakage interference inside the oven.
It may also need a new high-voltage diode and stirrer, and the cavity may be affected.
GE had a campaign (but not a recall!) covering several models.
Details are in their bulletin at http://184.108.40.206/mwd/ge_mw_mag_kit_bulletin.pdf
The parts kit (that GE used to pay for) is part # WB27X10489 and is shown in the photo below.
If you or a friend decide to look into it, we have critical information on safety, disassembly and door switches at our site, linked here on Fixya: http://tinyurl.com/yzjozk
You can find helpful exploded view diagrams and order parts by entering your full model number here: http://tinyurl.com/gv383
Oct 18, 2007 | GE JVM1653 Microwave Oven
189 people viewed this question
Usually answered in minutes!