How to brighten screen on acer 5610z - Acer Computers & Internet

Different chip set

May be there is any facility in control panel depends upon the video driver

Hello,

Your laptop was not designed to run windows 7 or be compatible with it. It may run fine with windows 7 but issues might come up sooner or later like the one you're experiencing.

[EXPERIMENTAL]
Download both of these (as I don't know which one of thsese two your laptop needs). Keep mind that doing the following could render your system inoperable and use at own risk. When downloaded, extract ZIP , open desired folder and find SETUP or INSTALL program. Right click and choose properties, then navigate to compatibility mode, then select windows Vista from the menu. Then apply changes, ok and close window and attempt to start.

Acer Aspire 5610Z VGA Intel Driver Vista

Acer Aspire 5610Z VGA NVIDIA Driver Vista

WIth the limited fault description its a guess at best. you probably have a corrupted driver or hard disk fault. If you can try a replacement hard drive and reload OS you should get progress.

The Back-light on your LCD screen is bad, your crystals aren't illuminating, so it is dark.... very dark.

You need a new LCD screen.

Sorry.

This is Acer Support home page,

http://gd.panam.acer.com/home/

1.In the box under the heading -> Select Product Family, click on Notebook.

2.In the next box that comes up, Select Product Line, click on Aspire.

3.In the next box, Select Product Model, scroll it down to 5610z, and click on 5610z.

4.There's your Bluetooth driver.

5.Click on the orange square icon with a Down Arrow in it, to the left of the Bluetooth file name.
A small window will come up.

6.If the empty circle to the left of ->Save File, does not have a green dot in it, click on this empty circle. Now go below and click on OK.

After you download the driver, it will be saved to your desktop screen, if you do not have your downloads set, to go to your My Documents folder. You may want to write down the driver file name, before you click on OK.

In either your My Documents folder, or if it is on your desktop screen, double-click on the file to open it.
Now follow the Installation Wizard.
After you're done, close all windows until you are back to your desktop screen. Now restart your computer.

You could have a defective screen - follow this to determine the fault.

Connect an external monitor to your laptop and power it up, if you see the normal Windows images then the video card and laptop is OK and the problem is definitely the backlight.

Dim image and/or dark display on the laptop's LCD screen indicates a faulty LCD backlight and it could be the inverter that supplies high voltage to the CCFL lamp or it is the CCLF lamp is nearly burnt out or burnt out, most likely this is the case.
The inverter can be replaced easily but the CCLF lamp is more time consuming and requires soldering skills.
Check out www.lcdparts.net for parts, repair service and DIY info.

Hi Garvoyee, try this program which will help repair your windows registry& blue screens;
http://www.zaperrors.com/?t202id=911719&t202kw=code%2039&gclid=CP2Y1_3cw5gCFQpuGgodSBwR0g
Below is Acer link: (Drivers for both XP & Vista) There is no 5610z, only Aspire 5610.
http://support.acer-euro.com/drivers/notebook/as_5610.html

Good luck!

Here you go:
http://personafile.com/Acer-Notebook-Aspire-5610Z-P099802000397.htm
Happy Holidays

ACER 5610Z Link to driver downloads