Question about Office Equipment & Supplies

1 Answer

Installed Samsung CLX2160

My hp pc keeps rebooting after i installed thr driver for the printer, has anyone experienced this b4?

Posted by on

  • isali Aug 23, 2008

    i was in safe mode but did not see the samsung drivers, let me try again, haven't done this for several years, a bit rusty!



1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert that gotĀ 5 achievements.


    An expert that hasĀ over 500 points.


    An expert who has written 50 answers of more than 400 characters.

  • Expert
  • 166 Answers

Havent heard of this before, didnt find any support buletins either, what you need to do is go in to the computer in safe mode, and uninstall the drivers, if you can get tem uninstalled then just run msconfig and disable the startup items that the samsung printer has, go back into windows in normal mode and uninstall the drivers. then go to samsungs website and get the lates drivers for the printer. If there was an issue the new drivers will have been updated to resolve the problem

hope that helps

Posted on Aug 23, 2008

1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

2 Answers

Samsung clx2160 deve home sensor error?

Can anyone help me at all as i have the same problem but wouldnt know where to start when it comes to pulling things off and so forth. If someone knows a easy way of doing this or wants to show me how to do this i would be over the moon,

Jun 26, 2011 | Samsung CLX2160 Multifunction Color Laser...

1 Answer

I need to intall my printer hp to my new pc how can I install it?

Please make sure before installing the printer device should not be connected to the system

1. Put the driver cd into the system cd drive.
2. Auto run will start & prompt you to click the install drivers
3. Keep it clicking NEXT it the install the drivers
4. Please reboot the system & them connect the device..

Them you will be able to use your printer

Oct 15, 2010 | HP OfficeJet 6210 All-In-One InkJet...

1 Answer

Driver samsung clx2160

You can download the printer driver for this unit from this link, just click HERE.

Sep 03, 2010 | Samsung CLX-2160N All-In-One Printer

2 Answers

Printer says "ready" but won't print

try checking cable if you have another cable try that after rebooting computer! if that doesnt work go to hp's website look up the units driver for the correct operating system reinstall the drivers from hp's website then reboot and try your printer again it should work! 99.9 percent of time error printing to queue is a communication problem from the driver being corrupt or a error in your system registry.
good luck!

Jul 12, 2010 | HP Color LaserJet 2600n Printer

1 Answer

Ink cartridge refill instructions for samsung clx-2160n

Youtube video demonstration.

Hope this helps.

May 26, 2010 | Samsung CLX2160 Multifunction Color Laser...

1 Answer

Laser printer samsung clx260 prints pale black

please check cartridge and your printer settings.

Dec 06, 2009 | HP LaserJet 4100 Printer

1 Answer

I have a clx 2160 printer and it has come up with message "replace transfer belt" can anyone advise what this is and best place to get one and can i do it myself

Check at they have many of these parts for Samsung. Once you get the new one you replace it by first removing the toners and drum, the transfer belt is next to remove from the front.

Nov 12, 2009 | Samsung CLX2160 Multifunction Color Laser...

1 Answer

Hi I have a samsung clx2160 printer out smudgy on colour

Please try to take out the imaging unit. Clean the area.
Donot touch with fingers. You ma use tissue paper. It may be due to spillage of toner during transportation etc.

Aug 01, 2009 | Office Equipment & Supplies

1 Answer

Have to keep setting up HPLJ 5P on a USB port everytime I print!

1)right click the my computer icon
2)click properties and then click hardware n go to device manager.
3)uninstall all usb ports and then scan for hardware changes
4)ur pc will detect your printer and ask for printer drivers
5)re load drivers and your pc will communicate with your printer
6)for reloding install the cd follow the instructions on the screen and click next
7)restart when the printer is loded.connect the wires and cords properly.

Nov 29, 2008 | HP LaserJet 5p Printer

1 Answer

Error: 0x887dd03a

Uninstall all software and drivers related to this printer. After rebooting the pc, Insert the installation CD again. After it starts up and you get to the point where the software wants to install in a directory, ie..c:\program files\HP\.... STOP. Reinstall the software in another directory. C:\HP\PSC2210. let it go thru the entire setup and reboot. Make sure the printer is unplugged before installing software. The software will let you know when to plug the printer in. I hope this helps.

Sep 14, 2007 | HP PSC 2210 All-In-One InkJet Printer

Not finding what you are looking for?
Office Equipment & Supplies Logo

Related Topics:

100 people viewed this question

Ask a Question

Usually answered in minutes!

Top Office Equipment & Supplies Experts


Level 3 Expert

100140 Answers


Level 3 Expert

7993 Answers


Level 3 Expert

66126 Answers

Are you an Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides