Looks like I have everything installed correctly, but when I try to monitor camera, I get "Video Listen Port Create Error." I disabled my PC firewall. Is there soemthing I have to do on my network router? Thanks
An expert who has achieved level 2 by getting 100 points
An expert that got 10 achievements.
An expert that got 5 achievements.
An expert whose answer got voted for 500 times.
Re: DCS-3420 SecuriCam Install
Did you install the software with the camera connected tothe computer? Disconnect the camera from the USB port and reinstall thesoftware. When the program asks you to connect the camera, do so, and itshould work. Hope this is of some help.Bud
Below is info for setting up Audio & Video to chaton line after you install , either Skype or a messenger program.
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need. goodluck!
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
1st You download Webcam Driver. D-Link DCS-930LCOMMENT INSTALLER UNE VIDEO CAMERA SUR NOTRE ORDINATEUR After this install the Webcam driver in the system. Installation of Webcam Driver Go to the control panel Click on the System Icon Click on the Hardware Tab Click on the Device Manager s Select the Unknown Device or printer device where yellow Question Marks sign on it. Right click on it and uninstall it. After this go to the top of the device manager and click on scan for hardware changes. Driver installation Wizard start. Brows Your Driver from the Hard Disk and click on next. Driver will be install.
Try to uinstall and reinstall the software. Ping the camera if you are getting a reply. Reset the camera by pressing the small hole on the side. If everything is already done then same thing occur then you have a defective camera.
set it up as follows: Go to Tools, then Options, and click on Audio Settings and set the Microphone and Speakers to the computer Audio Card. Then click on the Video Settings. The camera, if Installed Properly, it will come up and show a video picture. Then, on the bottom of the page click save. The camera and audio should function properly. Your friends and Family will now be able to see and hear you.
B. Yahoo Setup: After downloading and installing Yahoo Messenger
set it up as follows: Go to Messenger at the top left and click on it. Next go down to Preferences and click on it. Next Calling and Devices on the right and set the Microphone and Speakers to the computer Audio Card. Next go to the Test Audio section and (in blue writing) click on "Open the call setup assistant" and follow the instructions on the left window.
C. Windows Live Messenger:
After you start Windows Live Messenger, expand the view by clicking on the square on top left next to the red X. Then on the Windows Live messenger window on the right side, click on " "Show Menus." And then click on "Show the Menu Bar". Next go to the Menu Bar on right side, click on " "Action." Go to "TOOLS" and click "Audio and Video Setting" and follow the instructions. NOTE: Your audio and video should work. Enjoy. When done both the Audio and Video will function properly so you can chat and see family or friends you are connected to.
D. AIM (AOL) Messenger:
On the VIM sign-in window click on Edit. Then click on Settings Enhanced IM. Next click on Enhanced IM. Then click on Audio Video. The Audio and Video portion has drop downs so you can select the proper audio card and video camera installed in you computer. The Audi Video drop downs are Microphone Speaker Camera The audio and camera should function now. Additional information to use with VIM settings. Adjust Your Audio and Video Settings: In order to adjust your audio and video settings, please follow the steps given below: 1. Click the Audio and Video Settings button directly below the My Buddy or My Camera window. If you are currently Participating in an AOL Live Video IM session, a message will display: You must disconnect the current AOL Live Video IM Conversation before running setup. Would you like to disconnect now? Click the Yes button. 2. The Audio and Video Tuning Wizard will appear to help you verify that your camera, speakers and microphone are working Properly. Follow the on-screen prompts. Notes: The first time you use AOL Live Video IM, a message will display: Would you like to first check your audio and video settings? Click the Yes button. The Audio and Video Tuning Wizard will appear to help you verify that your camera, speakers and microphone are working properly. Follow the on-screen prompts. images in AOL Live Video IM may appear reversed, or as a mirror image (text may appear backwards) when you look at your own camera feed or at the Picture-in-picture (PIP) display. After making the settings your ready for a chat and video talk with your Family and Friends. Hope this helps. Bud
Wireless camera security systems are available at many stores such as Wal-mart, Fry's and Best Buy.
These systems can be used to monitor your home and possessions while
away. This article will show how to set up such a system.
Decide what you want to see on your security system. Front doors, back doors and driveways are popular choices. Other choices may include living rooms, hallways and garages.
are not completely wireless. They still need a wire for power. Most
systems come with plug in adapter to power each camera. Most power
wires are 4 to 6 feet long. The location of your cameras should be
close to power outlets. Professional installers may run electrical wire
inside walls and conceal the power outlets and adapters in junction
camera will need to be set to its own channel. Common channels for such
systems are labeled A through D or 1 through 4. Drill holes into walls
and mount the cameras with screws.
wireless camera receiver will be positioned next to the television.
Connect the receiver to the television using a cable that has a yellow,
red and white connector on each end. Some systems may have an "S-video"
connector and cable to connect it to the television. The receiver will
also be powered by a plug in wall adapter. Connect it to the receiver
and plug it into the wall.
the receiver to channel A or 1 and turn on the television. The channel
of the television may need to be set to Game, Video In or some other
name designating the input jacks used. Consult your television for more
view from the camera that is set to channel A or 1 should be visible on
the TV screen. Tilt the camera if needed to get the view you desire.
Set the receiver to channel B or 2 and repeat with the camera that is
set to B or 2. Repeat with the remaining 2 cameras.
advanced users may connect the receiver to a VCR, DVR or computer.
Digital video capture devices can be used to connect the receiver to
the computer. Using video capture software, the video from the cameras
can be broadcast on the internet using software such as Yawcam or
WebcamXP. HomeCamera.com can also be used to monitor your cameras on
You need to check with your router vendor on how to setup DMZ or Port Forwarding for your DCS-5220 in your router. (For Port Forwarding, please open BOTH HTTP Port and RTSP Port and select the Protocol as TCP for HTTP Port and select the Protocol as TCP/UDP(Both) for RTSP Port.