Question about Computers & Internet

4 Answers

Help with my 190S monitor

Every 5 secs an attention message pops up saying osd main controls locked and unlocked, its so annoying heeeeeeeelp Same problem
"OSD MAIN CONTROLS LOCKED/UNLOCKED" every couple of seconds
After pushing the buttons a couple of times it goes away but comes back if you restart the monitor

How to open the front panel?

Posted by on

  • Anonymous Oct 04, 2008

    i have the same problem

×

4 Answers

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

I have Philips 19C monitor. From today, every 5 secs an attention message
"osd main controls locked and unlocked"
The AUTO(OK) bottons for 10 sec not give nothink
What i can to do with this?
Gregory
my mail - communar@agry.gov.il

Thanks

Posted on Oct 08, 2008

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

Just take a hammer and hit on the screen ! I did and it worked

Posted on Dec 15, 2009

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

I solved the problem completely removing the "button board" inside the monitor.
Now the monitor's always on but it works.

Need to find a replacement spare part.

Posted on Jun 24, 2012

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Hi i need a solution to the osd main controls locked and unlocked keeps flashing up this message how do i fix this problem. greg

Posted on Jan 04, 2012

  • emmeemmeuno Jun 24, 2012

    i opened up the monitor and completely removed the "button" board.
    Now the monitor is always on, but now is back to work.

    maybe i have to find some replacement spare part..

  • emmeemmeuno Jun 24, 2012

    I solved the problem completely removing the "button board" inside the monitor.
    Now the monitor's always on but it works.

    Need to find a replacement spare part.

×

2 Suggested Answers

  • 1 Answer

SOURCE: help with my 190S monitor

First you must remove stand
Beneith there is a five screws
After that pry with small screwdriver plastic all around the display

Posted on Sep 24, 2008

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Why am I getting osd main controls locked flashing and then the same message saying unlocked and i am unable to clear it - posted in Monitors ... the attention osd locked is constantly flashing on and off...


Most of the monitors have a function to lock the OSD to prevent accidental changes in the configuration of the monitor.
If you are constantly getting the message about OSD being locked and unlocked then it means that the OSD locking button is constantly pressed.
Usually it is the "Menu" button on the monitor which is used to lock the OSD.
Check if the Menu button is constantly pressed.

Sep 11, 2010 | Compaq Presario 5000 PC Desktop

2 Answers

I have a monitor philips 190S and the osd main control is locked. how i can unlock?


23 Oct 2008 ... There are a few things you can do to solve the problem, ... The menu should be reset and the flashing OSD control message should disappear. ... controls locked, then it comes up again saying OSD main controls unlocked. ... I have a Philips 190S monitor. I do have a button to enter the onscreen menu. ...
filetonic.com/blog/2008/10/23/osd-main-controls-blocked/

Dec 06, 2009 | Philips 190S7FB 19 inch LCD Monitor

1 Answer

Osd main controls locked/unlocked pops up every 5 seconds


Estava também com o mesmo problema de voces, já estava irritado, então abri o monitor e desconectei a ligação com a placa de controle dos comandos dos botoes do menu. é fácil fazer. Só que não vai funcionar mais os botoes. pelo menos essas mesagens não vão mais incomodar.

Mar 28, 2009 | Philips 170S7FS 17" LCD Monitor

5 Answers

Problem with OSD Main Contorls unlocked/locked


Philips say "To unlock the OSD Controls press the “MENU(OK)” button for more than 10 seconds while there is video input from PC."

Jan 29, 2009 | Philips 190B6CB/27 19" LCD

4 Answers

Every few seconds a box pops up on my screen saying Attention OSD Main Controls Locked and sometimes the same message saying Unlocked Pls help me to deal with this problem


Philips say "To unlock the OSD Controls press the “MENU(OK)” button for more than 10 seconds while there is video input from PC"

Jan 15, 2009 | Philips 190B6CB/27 19" LCD

3 Answers

OSD Main Controls Locked


Hold the "OK" button for about 20 seconds

It will initialy come up with the message "OSD Locked" and then after the 20 seconds a ne message will appear "OSD Unlocked"

Dec 20, 2008 | Philips 150S4FB 15" LCD Monitor

4 Answers

Philips monitor 190b6cb/175


Same problem OSD main controls locked the 5 seconds later OSD main controls unlocked then system closes down sayingproblem with atkdisp, what does all this mean? Can still operate my computer but thid damned flashing OSD message continues.

Aug 10, 2008 | Philips 150S4FB 15" LCD Monitor

3 Answers

Help with my 190S monitor


The OSD button has gone faulty.
The button will need to be replaced , or it might just need spraying with a contact cleaner like RP-7 or WD40.
Both solutions will require the removal of the front cover to access the button.

Jun 06, 2008 | Philips 190B6CB/27 19" LCD

4 Answers

Osd main controls locked


that depends on the brand and model of monitor ,
it normally takes 2 buttons pushed at same time to unlock it.
if you have side buttons its normally them.

May 12, 2008 | Gateway FPD2275W LCD Monitor

24 Answers

Osd main controls locked/unlocked pops up every 5 seconds


Hi,

Press the Menu button ( marked OK) for one minute, or more, and a blue/red menu list should appear on screen.

Using the adjust button (immediately to the left of the OK button) by pressing the arrows at each end up or down as required you can enter the menu and select an action by scrolling.

At the end of the list of possible adjustments on the left of the screen (brightness, contrast, etc) is the Reset section.

On the righthand side of the screen is a flashing Yes No choice which automatically alternates.

The trick is to select the Reset choice on the left and while selected press the OK button when the Yes alternative on the right of the screen is flashing.

You VDU should then Reset and all will be well.

Mar 26, 2008 | Philips 190B6CB/27 19" LCD

Not finding what you are looking for?
Computers & Internet Logo

Related Topics:

3,204 people viewed this question

Ask a Question

Usually answered in minutes!

Top Computers & Internet Experts

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers

kakima

Level 3 Expert

98796 Answers

David Payne
David Payne

Level 3 Expert

14071 Answers

Are you a Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...