Question about Sport & Outdoor - Others

Open Question

Salorr Gas Scooter HS3101 Rear Wheel Assembly Instructions

I have this scooter and my ex took the rear wheel assembly off. I have looked all over the net and can't find instructions anywhere. Please help me!

Posted by on

  • Anonymous Sep 06, 2008

    Need to replace rear will tube on same scooter.  Is there a easy way to get wheel off?

×

5 Suggested Answers

  • 1 Answer

SOURCE: ab lounge sport assembly

I had the same problem I found the manual on line and it shows how to put it together http://www.fitnessquest.com/images/ABLOUNGmanual2_18_0.pdf I hope this is helpful as it was for me.
Dodie B

Posted on Dec 06, 2008

daverh
  • 117 Answers

SOURCE: how do you install a front wheel hub assembly

Have a look here - you should find what you need.

Posted on Jan 16, 2009

  • 1 Answer

SOURCE: assembly instructions for yorrk multigym

I have the Installation guide for the York 925 Gym in a pdf format. If you need this e-mail me on swampy07@sky.com and I will e-mail it to you.

Posted on Apr 06, 2009

  • 99 Answers

SOURCE: 1992 Honda Accord EX Replacing the Rear Wheel Assembly

It won't make any difference, seeing that the car is older and you don't have the ABS functionable it won't change anything. You already have the ABS light on so nothing new will happen.
Regards
Sam

Posted on May 12, 2009

  • 2 Answers

SOURCE: York Compact 901 Multi Gym

http://www.yorkfitness.com/store/PDF/901_Instructions_Compressed.pdf

Posted on May 12, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

What is maximum wheel size that can be used on merits challenger scooter


Only the stock size.

Merits Challenger Three and Four Wheeled Scooters - Independent ...

ilcaustralia.org.au/products/5611
Nov 30, 2016 - A rear wheel drive scooter with rear suspension, suitable for outdoor use. It is available with three or four wheels. Closed loop handles allow ...

Merits Parts - All Mobility Brands - Mobility Scooter and Power Chair ...

www.monsterscooterparts.com/mobility/mobility-brands/mehepr Merits Atlantis (P710/P7101/P7102) Power Chair Parts. ... Monster Scooter Parts carries Merits parts for all models, including scooter and power chair replacement battery chargers and battery packs. ... As an authorized Merits parts dealer, Monster Scooter Parts can help you find just the ...

Merits Health Products - scooter, power wheelchair, manual ...

www.merits.com.tw/ Merits is the professional manufacturer of health products. We specialize in scooter, wheelchair, home care bed, accessibility, patient aids and other home ...

Merits Challenger 4 Wheeled Scooter - Assistive Technology Australia

https://at-aust.org/items/6176 Nov 9, 2016 - Merits Challenger 4 Wheeled Scooter - UNAVAIL (Deleted). Learn More. Approximate Price: $4350. No supplier. (0 suppliers). For information ...

[PDF]Merits Pioneer 3 and 4 Owner's Manual.pdf - Scootaround

https://www.scootaround.com/.../merits/Merits%20Pioneer%203%20and%204%20Ow... Congratulations on the purchase of your new Pioneer 3 or 4 power scooter. We at ... tiller assembly, battery charger, and owner's manual. Contact ... Wheel Size.

maximum wheel size that can be used on merits challenger scooter Google...

Apr 05, 2017 | Health & Beauty

1 Answer

How do I replace a tire on a pride maxima sc900v 3 wheel scooter?


Hi. Ring monster scooter parts the rear wheel assembly cost $132 dollars there is no mention on the front wheel assembly they might help U with more information 800-798-0325. ... Cheers

Sep 28, 2016 | Pride Luxury Line Maxima Scooter - 4 Wheel...

2 Answers

How do I get a wiring diagram for CTM 850


Hi there is a PDF instruction download type in CTM850 mobility scooter schematic. INCLUDES HS-890 or U can get in touch with www.ctmhomecare.com.they might b able to help .good luck

Mar 04, 2016 | Ctm HS 890 4 Wheel Heavy Duty Power...

1 Answer

Gogo ultra runs making noises


What shape are the brushes in on the motor? If the copper wire is discolored that indicates over current. The armature may have a shorted winding after an extended overheat condition. You may get lucky by just cleaning the surface of the armature where the brush contacts it.

Mar 05, 2013 | Pride Go-Go Ultra X 3-Wheel Travel Scooter

1 Answer

I have a pride celebrity dx sport that the battery is charged but wheels are locked on even in neutral. wont go forward or reverse...please help!


I suspect that the electromagnetic brake has seized. I have come across this a few times on some of the larger pride scooters, usually if they have got wet and been left for a while. They can normally be free'd off. First, loosen the left hand rear wheel nut (the one in the middle of the wheel). Put the scooter into freewheel and jack the rear wheels off the ground. Remove the left hand rear wheel and be carefull not to lose the hub key which locates between the axle and hub of the wheel. Unplug the wire that comes out of the brake, then remove the brake from the end of the motor. Before going any further, check to see if you can move the disk inside the brake (the disk is the black part that you can see on the inner side of the brake with the hexagon cut out). If you can move this disk at all, the brake is NOT seized. While at this stage, plug the brake connector wire back in , turn on the scooter and press the throttle lever. If the motor spins, you can discard the motor as being of any promblem. If the brake IS seized, it will need to be dis-assembled. Dis-assembling the brake usually requires the removal of 3 or 4 small allen headed bolts on the rear of the brake, followed by some spacers, small washers and a small ball bearing or two. Watch what comes off and in what order, and be carefull not to lose any parts. Free off the black fibre type disc from the metal plate that it is stuck too. This can be done using a small hammer and large flat bladed screwdriver taking care not to damage the disc. Lightly rub the metal plate with fine grade wet and dry to remove any rust or dirty deposits, then re-assemble the brake in the reverse order, and refit the rear wheel making sure you apply a small amount of grease to the axle shaft.
This should work for you but failing that, I think you will need a new brake assembly.
Hope I have been of some help to you.

Aug 09, 2010 | Pride Celebrity X 4-Wheel Electric Scooter...

1 Answer

Re-assembling a E200 rear wheel


Click this link http://www.razor.com/support/pdf/manuals/current/e100-series-manual.pdf

Scroll down to chain and tire replacement. It has a full exploded diagram of the rear wheel

Jun 28, 2010 | Razor E100, E125 & E200 Electric Scooter...

1 Answer

How do i put the rear wheel on


Call your dealer and ask them, or go to an auto parts store and pick up a Chiltons manual for your bike. It has step-by-step disassembly and re-assembly instructions complete with pictures for clarification. Please rate this if it was helpful. Good luck.

Aug 21, 2009 | Suzuki GSX-R 750 Motorcycles

Not finding what you are looking for?
Sport & Outdoor - Others Logo

Related Topics:

513 people viewed this question

Ask a Question

Usually answered in minutes!

Top Sport & Outdoor - Others Experts

yadayada
yadayada

Level 3 Expert

70346 Answers

kakima

Level 3 Expert

102366 Answers

Brad Brown

Level 3 Expert

15100 Answers

Are you a Sport and Outdoor - Other Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...