Question about Samsung LN-S2651D 26 in. LCD Television

1 Answer

Samsung 40" Full HD LCD

Hi,

I bought a new 40" LCD last night & when I connect my Foxtel box from scart to component (Direct to TV and via amp), I get 'mode not supported'.

Please Help!

Posted by on

  • Anonymous Mar 14, 2014

    New receiever,new tv, new Foxtel box and no sound coming through receiver

  • Anonymous Mar 14, 2014

    Just bought a new RCA LED LCD TV and when conected to Direct TV box keeps telling me no signal

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 2,071 Answers

Resetting the TV
If the buttons on the remote AND the buttons on the TV case do not work (channels do not change and you cannot open or navigate the menu), the TV has stopped responding. Reset the TV as follows:

NOTE:
Some TVs have a reset button. If available and accessible, try using the reset buttons before using the steps below. Using the reset buttons can save time.

Samsung 40
1. Unplug the TV power cord from the power outlet.
2. Unplug any connected devices (DVD, Set-top boxes, etc...)
3. Press and hold the TV power button for five seconds.
4. Plug the TV power cord back into the power outlet and turn on the TV.
5. Open the on-screen menu to confirm that the TV is responding again.
6. Turn off the TV and reconnect the devices.
7. Turn on the TV.

hope this may help;

Regards,
VOTIT

DON'T FORGET TO RATE:

Posted on Aug 22, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Samsung le40f71bx picture flickers on and off with hd source


I've had similar for a long time, now the picture only lasts a few minutes or seconds. Have to turn the TV off, wait 5 minutes, turn it back on. That's with Sky HD. Used to be the same with SCART but I don't use that any more, and I get it with the Wii on Component. However HD DVD and Blu Ray players are no problem!

See my post here - http://www.avforums.com/forums/lcd-led-lcd-tvs/1622157-samsung-f71-flashing-pattern-fault.html

Way out of warranty but really just need some repair expert to tell me what needs fixing. Taking the cover off there are very few components and look easy to replace, and seen some on ebay. A fix from Samsung would be vastly in excess of the value of the TV.

Apr 21, 2012 | Video Game Consoles & Games

1 Answer

HD not working.


Have you connected it Via HDMI? if the screen is still connected via Scart then that is the problem.

May 03, 2010 | Samsung LE32R74BDX 32 in. HD-Ready LCD...

1 Answer

Have just bought a new samsung led lcd tv have got the tv and foxtel working but cannot seem to get the panasonic dvd recorder working just keep getting a no signal sign,the dvd runs through the component...


I am guessing slightly as you havn't mentioned the model, but I think you need to change the output setting on the panasonic to component before it will work, connect it up to your old set or to the new one using scart, go into the menu and select component output, the pic will probably disapeer, then connect to the new tv via the component connection and it should work

Nov 27, 2009 | Televison & Video

1 Answer

HOW TO CONNECT SAMSUNG 40 LCD TV TO SAMSUNG SURROUND TZ215 THRUGH SKY + HD BOX.


you will need the following = HDMI LEAD
Optical Audio Lead
Red and White phono Lead

Sky HD Box > connect to Tv via HDMI Lead.

Sky HD box > Connect the optical Audio, and the Phono Leads To your Surrounds sound.

The reason I am wanting you to connect the phono's as well as the optical audio out. Not all programs are transmitted with Dolby D so you will need these for normal sound to come through your surround sound.

One last thing I would like you to check is the sound settings on your Hd box.

OLD PROGRAM GUIDE:
On your sky remote. Press SERVICES, 4, 2, then ensure that Dolby D is displayed if not highlight and using the blue button change this to Dolby D. then arrow down to save.

NEW PROGRAM GUIDE:
On your sky remote. Press SERVICES, 0, Arrow along to SOUND then arrow down and change this to DOLBY D Then press the GREEN button.

Hope this Helps you out. IF so please leave a thumbs up

Little Dish Fitter

Aug 26, 2009 | Samsung LE40B650T2 40 in. Full HD Crystal...

1 Answer

No sound when Wii is switched on


DID YOU TRY PLUGGING YOUR COMPONENT CABLE INTO A SCART ADAPTOR FOR YOUR TV...THIS SHOULD FIX IT FOR YOU.... I TAKE IT YOUR TV IS A 5 SERIES OR A 6 SERIES SAMSUNG.. GREAT TVS HAVE ONE MYSELF, BETTER WHEN MORE CHANNELS ARE BROADCAST ON FULL HD BUT...

Jan 11, 2009 | Samsung LE40R72BDX 40 in. HD-Ready LCD...

1 Answer

Samsung le40a lcd - picture quality


Hi - I have some suggestions. The following factors effect picture quality:
1. Source (because LCD TVs have much higher picture quality than traditional CRT "Tube" TVs, the worse your source material, the worse it looks on a LCD TV).
DVD and Sky/Digital TV should look excellent on this TV when connected with a good quality Scart lead (nothing too expensive, but a Oxygen Free Copper Gold lead may help) directly into one of the TV's Scart inputs (avoid using "switching" boxes for multiple equipment).
Also, bear in mind that this is a HUGE screen (40 inches I think) and will REALLY show up bad source material.
The best advice I can give is, if you have HD-ready equipment use HDMI connections for everything (ideally with an HD-uplscaling DVD player which will "improve" the quality of standard DVDs on the TV - I recommend models by Philips) and check that you are in "Movie" or "Cinema" mode on the TV.
Make sure that all of your equipment, like your Sky digibox, is set to 16:9 mode (not 4:3) aswell to preserve the true widescreen aspect ratio.
Hope that helps!

Dec 31, 2008 | Samsung LE40R72BDX 40 in. HD-Ready LCD...

4 Answers

Question regarding audio connections Akai 30" LCD TV


a switch box is needed the s video shares the red/white audio with the yellow rca that is being used already

May 07, 2008 | Televison & Video

1 Answer

Hi there, Ive recently bought a Monster Scart cable to connect to a 40" full HD sony bravia LCD tv. When the tv was first switched on using the foxtel cable it looked perfect and when we switched over to...


What type of equipment are you using with the scart cable.the sony has limited video processing on the regular video imputs(composite and s-video).I have the 46 inch version,and it too looks like crap on the low end video.

Mar 07, 2008 | Televison & Video

Not finding what you are looking for?
Samsung LN-S2651D 26 in. LCD Television Logo

485 people viewed this question

Ask a Question

Usually answered in minutes!

Top Samsung Televison & Video Experts

The Knight
The Knight

Level 3 Expert

72640 Answers

Henry  Thomas
Henry Thomas

Level 3 Expert

1074 Answers

Jerry Greenberg
Jerry Greenberg

Level 3 Expert

1667 Answers

Are you a Samsung Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...