Question about Tyan Transport TA26 Server

1 Answer

No video at all

I have a Tyan Transport GT20 B5350 1U server with the following processor: INTEL - XEON 3.0GHZ 800MHZ FSB 1MB L2 CACHE 604-PIN (SL7PE) and 2 GB of non-ECC, non-Registered PC-2700 RAM. There are no hard drives installed, but all I want is to get into the BIOS. I get no video in this configuration. Help!

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 40 Answers

Try first with one cpu and only one stick of memory in socket zero

if the video does not come on... try next to reset the bios .. clear the settings... it may be setup to search for a pci or pci-e video card in the bios

next try to test the wattage being pulled into the system at boot... should be over 200watts.. may indicate a power issure

are there any beep codes ... post codes or ... is there a single beep tone during power on to verify the motherboard is functional and checks out fine at self start...

mark@omces.com

Posted on Sep 28, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

What are the different cpu's that ux915g motherboard will accept? Can it take a pentium D processor?


This would be the Aopen motherboard from the cube...
They take the following CPU's
Processor Number
Processor Frequency
FSB
Ratio
Cache
5 Series
560
3.60GHz
800MHz
18x
1MB L2
550
3.40GHz
800MHz
17x
1MB L2
540
3.20GHz
800MHz
16x
1MB L2
530
3.00GHz
800MHz
15x
1MB L2
520
2.80GHz
800MHz
14x
1MB L2
3 Series
350
3.20GHz
533MHz
24x
256K L2
345
3.06GHz
533MHz
23x
256K L2
340
2.93GHz
533MHz
22x
256K L2
335
2.80GHz
533MHz
21x
256K L2
Note: With CPU changing rapidly, there might be fastest CPU on the market by the you received this installation guide. This table is kindly for your references only.

May 13, 2014 | Computers & Internet

1 Answer

Single core 2.8ghz xeon to quad core cpu


http://en.wikipedia.org/wiki/Xeon#Prestonia

"In 2002 Intel released a 130nm version of Xeon branded CPU, codenamed "Prestonia". It supported Intel's new Hyper-Threading technology, and had 512KB L2 cache. This was based on the "Northwood" Pentium 4 core."

Meaning it is a Single-Core processor.

http://en.wikipedia.org/wiki/List_of_Intel_Xeon_microprocessors#.22Prestonia.22_.28130_nm.29

Scroll down.

400MegaHertz Front Side Bus. (400MHz FSB)

http://en.wikipedia.org/wiki/Xeon#7300-series_.22Tigerton.22

"The 7300 series, codenamed Tigerton (product code 80565) is a four socket (packaged on Socket 604) and more capable ->
QUAD-CORE processor.................."

http://en.wikipedia.org/wiki/List_of_Intel_Xeon_microprocessors#.22Tigerton.22_.2865_nm.29

1066MegaHertz Front Side Bus. (1066MHz FSB)

The motherboard uses the Intel E7505 motherboard chipset,

http://en.wikipedia.org/wiki/Intel_Xeon_chipsets#NetBurst-based_Xeon_chipsets

Note the - Processor FSB supported -

533MegaHertz

ONLY supports Single-Core processors, too.

The answer is No

Regards,
joecoolvette

Dec 17, 2012 | Computers & Internet

1 Answer

Can i put dual core processors in my intel se7505vb2 motherboard?


http://www.intel.com/support/motherboards/server/se7505vb2/sb/cs-007399.htm

Page 16 of the Technical Product Specification guide;

3.1.1 Processor Support
"The Intel Server Board SE7505VB2 supports one or two processors in the 604-pin FCPGA package."

-> Socket 604,

http://en.wikipedia.org/wiki/Socket_604

-> Intel XEON processors ONLY

"When two processors are installed, all Processors MUST be of identical revision, core voltage, and bus/core speed."

-> Means you really should use two IDENTICAL processors.

"When only one Processor is installed, it should be in the socket labeled CPU1, and the other socket must be empty."

-> Self-explanatory.
That's the processor socket furthest away from the black AGP graphics expansion slot, and closest to the outside edge of the motherboard.
(Page 104, and 105)

ONLY supports Intel Xeon processors with a 400MHz, or 533MHz FSB.

Dual-Core Xeon's start at 667MHz, and wouldn't work anyway; due to different Core architecture, and Instruction Sets.

667MHz, 800MHz, 1066MHz, and 1333MHz, for dual core Xeon's,

http://en.wikipedia.org/wiki/List_of_Intel_Xeon_microprocessors#Xeon_.28UP.2FDP.29.2C_Dual_Core_2

(Scroll down just a touch, to get the Wikipedia 'banner' out of the way, or click on it's X)

Scroll down the page, look at the charts. Starts with 800MHz FSB for Dual Core, then goes 667MHz, 800MHz, 1066MHz, and 1333MHz, Front Side Bus.

Use Dual Core processors?

No.

Two Single-Core processors.

Product Guide for the Intel Server Board SE7505VB2,
(Motherboard manual),

http://download.intel.com/support/motherboards/server/se7505vb2/prod_guide.pdf

The above is a direct link to the PDF file, motherboard manual.
If it doesn't work just by clicking on it, then copy it; and paste it in your browser address bar. Press the Enter key.

(This is a PDF file. The computer you are using now has Adobe Reader on it, which uses PDF files.
After you click on the above link, or press the Enter key; it may take up to 30 seconds before the first page comes up.

Didn't want you to wait a few seconds, and think nothing is happening)

For additional questions please post in a Comment.
Regards,
joecoolvette

Nov 29, 2012 | Computers & Internet

1 Answer

Cpus it can handle


Hello here is some info:

http://www.dell.com/downloads/global/products/optix/en/spec_optix_gx520-gx620_en.pdf

You need a pdf reader (adobe) to read the content.

Intel 945G chipset with Intel Pentium 4 processor with 800 MHz front side bus and Hyper-Threading and up to 2MB of L2 cache and Celeron D processor with 533MHz and 256K L2 cache.

Intel Pentium 4 800MHz FSB socket T with HT, XD, EM64T, and 1MB L2 cache (5xx series)

The homepage is here:

http://www.dell.com/support/troubleshooting/us/en/ussoho1/Product/optiplex-gx520

Try also to call the dell support in your country for more qualified answer.

Good luck

Nov 25, 2012 | Foxconn Dell Gx520 Ls-36 Rev A01 Pentium...

1 Answer

What type of dual core processor can I use for my dc7600?


The motherboard for the dc7600 has an Intel LGA775 processor socket. However, not all LGA775 processors are compatible with the motherboard. For the small form factor, the following CPUs are supported: Intel Celeron D Processors:
Intel Celeron D 331 Processor (2.66-GHz, 256K L2 cache, 533-MHz FSB) , Intel Celeron D 336 Processor (2.80-GHz, 256K L2 cache, 533-MHz FSB) , Intel Celeron D 346 Processor (3.06-GHz, 256K L2 cache, 533-MHz FSB)
Intel Pentium 4 Processors with HT Technology:
Intel Pentium 4 521 Processor (2.8-GHz, 1-MB L2 cache, 800-MHz FSB) , Intel Pentium 4 524 Processor (3.06-GHz, 1-MB L2 cache, 533-MHz FSB) , Intel Pentium 4 541 Processor (3.2-GHz, 1-MB L2 cache, 800-MHz FSB), Intel Pentium 4 620 Processor (2.8-GHz, 2-MB L2 cache, 800-MHz FSB), Intel Pentium 4 630 Processor (3.0-GHz, 2-MB L2 cache, 800-MHz FSB), Intel Pentium 4 631 Processor (3.0-GHz, 2-MB L2 cache, 800-MHz FSB), Intel Pentium 4 640 Processor (3.2-GHz, 2-MB L2 cache, 800-MHz FSB), Intel Pentium 4 641 Processor (3.2-GHz, 2-MB L2 cache, 800-MHz FSB), Intel Pentium 4 650 Processor (3.4-GHz, 2-MB L2 cache, 800-MHz FSB), Intel Pentium 4 651 Processor (3.4-GHz, 2-MB L2 cache, 800-MHz FSB), Intel Pentium 4 661 Processor (3.6-GHz, 2-MB L2 cache, 800-MHz FSB) or
Intel Pentium D Dual Core Processors:
Intel Pentium D 805 Dual Core Processor (2.66-GHz, 2x1MB L2 cache, 533-MHz FSB), Intel Pentium D 820 Dual Core Processor (2.8-GHz, 2x1MB L2 cache, 800-MHz FSB), Intel Pentium D 915 Dual Core Processor (2.8-GHz, 2x2MB L2 cache, 800-MHz FSB), Intel Pentium D 925 Dual Core Processor (3.0-GHz, 2x2MB L2 cache, 800-MHz FSB), Intel Pentium D 930 Dual Core Processor (3.0-GHz, 2x2MB L2 cache, 800-MHz FSB), Intel Pentium D 940 Dual Core Processor (3.2-GHz, 2x2MB L2 cache, 800-MHz FSB), Intel Pentium D 945 Dual Core Processor (3.4-GHz, 2x2MB L2 cache, 800-MHz FSB), Intel Pentium D 950 Dual Core Processor (3.4-GHz, 2x2MB L2 cache, 800 MHz FSB)

Unfortunately, these are old processors and I don't see any available new. Newegg.com lists a couple available as refurbished. You may be better off getting a new computer with either a Intel I3 or current AMD processor.

I wish that I had better news for you.

Cindy Wells
(do not attempt to use a CPU that your motherboard doesn't support. It probably won't boot.)

Mar 30, 2012 | HP Compaq dc7600 Small Form Factor PC...

1 Answer

Upgrade Intellistation Z Pro 6121 w11 to 64bit Xeon Processors


It helps if you give the right specification - the W11 is the 6221, not the non-existent 6121.
You have 2 x 2.4 Xeon in a Socket 604 package. The only CPUs these could be are the Tigerton - it certainly does support 64-bit operation, as well as VT.
You have little choice in processors - Tulsa, Tigerton and Dunnington.
The Tigerton is a little ripper! 2 x 4MB on-die cache, 1066 internal FSB, wide voltage range and low power consumption (80W).
http://ark.intel.com/Product.aspx?id=30779
You have a 4 processor 64-bit box - if it isn't poweful enough for you (and I can't see why - I run 50 concurrent VM users on less), you can only go to the 2.93 Tigerton as an upgrade. The other CPUs have more horsepower, less torque!
Don't get hung up on processor speed - for 64-bit big cache rules.

Aug 05, 2009 | IBM IntelliStation Z Pro 6221 PC Desktop

1 Answer

Upgrade Processor for 3300 Magnia Server


It supports Intel Xeon processors.socket 940 i think.xeon cpu`s @ 1.8 Ghz or 2.40 Ghz with fsb 400 Mhz,and L2 cache 512 kb

Mar 11, 2009 | Toshiba Magnia 3300 Server

1 Answer

Cant run 3E GHz 800 FSB L2 cache 1MB cpu on a ASUS P4P800s-x


here are the specs.
CPU FSB DDR DIMM Type Memory Frq.
800Mhz PC3200/PC2700/PC2100 400/333/266 Mhz
533Mhz PC2700/PC2100 333/266 Mhz
400Mhz PC2100 266 Mhz

the CPC and the moemories meets these spec. then you shouldn't have problem.
since you didn't spec the meories. I am assuming that the meories are within specs.

but, from what you say about, I suspect the memories is not up to part. looks like the meories are in PC 2100 range.

Nov 14, 2008 | ASUS P4P800S-X (610839118175) Motherboard

1 Answer

Cpu upgrade


Your computer has one of these options:
spacer.gif level2_arrow.gif Intel® Celeron® Processor 560
(1MB L2 cache, 2.13GHz, 533MHz FSB)
or
Intel® Celeron® Processor 550
(1MB L2 cache, 2.0GHz, 533MHz FSB)
or
Intel® Celeron® Processor 540
(1MB L2 cache, 1.86GHz, 533MHz FS
or
Intel® Celeron® Dual-Core Processor E1400
(512KB shared L2 Cache, 2.0GHz, 800MHz FSB)
or
Intel® Celeron® Dual-Core Processor T1400
(512KB shared L2 Cache, 1.73GHz, 533MHz FSB) spacer.gif

Check the features with Acer first and see if your motherboard model support that speed processor.
Contact tech support directly to the manufacturer right here:

http://acer.custhelp.com/cgi-bin/acer.cfg/php/enduser/ask.php?p_sid=8P57rbgj

Oct 13, 2008 | Acer Aspire 5315 Notebook

Not finding what you are looking for?
Tyan Transport TA26 Server Logo

Related Topics:

115 people viewed this question

Ask a Question

Usually answered in minutes!

Top Tyan Computers & Internet Experts

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers

kakima

Level 3 Expert

102366 Answers

Bill Boyd

Level 3 Expert

37732 Answers

Are you a Tyan Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...