Question about Nortel NETWORKS CONTIVITY 1100 T1 WAN BNDL 5 Router

Open Question

Nortel Network Night mode (to turn off during the day)

We turn off the night mode during the day, but once the phone rings 4 times it automatically switches to emergency night mode. We have a 24 hour emergency system. 10 Line system. Can't tell what model. NT8B27JaaaE6


Pls. advise admin@cimsltd.com

Posted by on

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Belkin n1 vision is shutting down


Is the Belkin plugged into a power strip or UPS? Try another AC outlet. Has the AC jack,plug in the rear or the Belkin been damaged due to pulling on the AC cord, causing a lose connection? Is your computer shut down at night? No Hibernate, No Sleep? Are their setting for the Belkin to shut down/timeout after a certain idle time? Here's a user manual: http://cache-www.belkin.com/support/dl/f5d8632-4_usermanual.pdf

Feb 14, 2013 | Belkin N1 Vision Router

4 Answers

I just replaced my 2-wire modum & now my NetgearWG111v3 router goes offline everynight. I have to go thru the "repair" process etc every morning to get back on the internet. I have been told...


Hi,
To get the IP Address of your Modem you will need to call your Internet Service Provider to get that info, and they can as well assist you in getting that in the Netgear Router.
Or in you windows settings you can check the option in Network and Sharing Center
mvincentc_49.jpg
Click on Home Group and Sharing Options above,
mvincentc_50.jpg Then select Change Advance Sharing Settings... to see the pic/page below mvincentc_51.jpg
Click on the Drop Down of home network to see the exact page posted and select all turn on network discovery so every time you turn your computer ON it will detect you network right away.
I do not think this will be an IP Address issue from the Modem since it should be auto detected by the router.
But if that would be the case then calling your Internet Service Provider will be best so they can provide you the correct IP Address from the modem and help you enter it in the Netgear Router settings.
I hope this helps.
Have a nice day,
mvincentc

Aug 02, 2011 | Routers

1 Answer

Internet going off VERY frequently


1. Firmware update may be required for the Router.
2. check your firewall settings and the Wireless configuration in the router.
3. You may have to allow the MAC address for the device that you are trying to connect with to have permission to connect to the network.
4. Verify IP for the the PC ( this is done in the DOS window) at the DOS prompt type "ipconfig /all" this will bring up the network report as to what is and what is not connected.
5. Unplug router and modem from the AC.
6. Reboot the PC.
7. Window is totally different from the router firmware updates.
Windows is downloading it security and web update when you see the prompt. This has nothing to do with the router.

Jun 18, 2010 | 2wire (1000-400108-001) Router

1 Answer

Router was fine last night - but the two wireless computers in the house are unable to get online this morning. What lights are supposed to be "lit" on the front? I see Power wlan and Internet are lit now.


Hi Friend,

Please follow the steps in order to resolve the issue:

1.Open the router page (192.168.1.1)
2.Enter the username and password (by defualt password is admin and leave the username blank)
3.In the router setup page click Wireless and fill the sections and mentioned
Wireless Network Mode-Mixed
Wireless Network Name- As per your choice
Wireless Channel-6-2.437GHz
Wireless SSID Broadcast-Enable and click Save settings.

4.Now click Wireless Security and select the Security mode as WEP
5.WEP Encryption should be 64 bits
6.In the Key1 enter a 10digit/10 letter password and click save settings.
7.Click Advanced Wireless Settings and fill the section as mention
Beacon Interval-75
Fragmentation Threshold-2306
RTS Fragmentation-2307 and click save settings.

8.Turn off the router for 30 seconds and then turn it on and try to connect your laptops.

I hope this will resolve the issue.

Regards
Chiranjeet

May 20, 2010 | Linksys Wireless-G WRT54G Router

1 Answer

Every morning I can't connect to the internet without swiching the modem off the back on despite all the lights being on. I can leave the computer on all day connected to the internet and everything is...


Change the security settings of your modem to WAPBY GETTING IN TOUCH with your ISP vendor.May be some one else in your neighbourhood is able to access the internet by connecting to your Modem.

Oct 10, 2009 | NetComm NB750 Router

1 Answer

Linksys BEFSR41 Cable/DSL Router and RCA DCM425 Connection issue


hi,
first u configure the modem as bridge. And then u connect the linksys router, wht ever u config u configure in the router. it should work fine.........

Mar 12, 2009 | Linksys Wireless-G WRT54G Router

1 Answer

Nortel 3120 Secure Router


NetFlow is a network protocol developed by nortel Systems to run on router IOS-enabled equipment for collecting IP traffic information

Jan 30, 2009 | Nortel 3120 Router (SR2102002E5)

1 Answer

Lightning strike


It is the computer's internal modem. Replace the modem and the problem will be solved.

Thanks and please take a moment to rate as FixYa. Thank you.

Jul 23, 2008 | 2wire HomePortal 1000HW DSL Modem and...

1 Answer

New belkin router not working properly


Word of advise, Belkin is terrible.... any kind of device I have gotten from them never worked properly, ether that or they have some extremely weird way on how to operate them. Yes they are cheaper but there is a reason for that. Go for a linksys router.

May 04, 2008 | Belkin Wireless G Plus MIMO (F5D9230-4)...

1 Answer

NEW BELKIN WI FI CABLE ROUTER NOT WORKING AFTER 4 DAYS OF USAGE


I would try a hard reset of the router to reinstall the original settings. Then reconfigure and test again. If ther is no change then as you probably suspect the router has failed. Let us know if you have any other questions and please don't forget to rate this posting.

Feb 06, 2007 | Belkin Wireless Cable/DSL Gateway Router

Not finding what you are looking for?

Open Questions:

0 Answers

Nortel 1001s secure router qos configuration i have a nortel 1001s secure router i would like to configure qos on it i managed to managed to configure qos but it seems not to be working as when i try to calculate or monitor my bandwidth i seem not to get any data, here is a view of the running config of the router R-KEN-BITU-001 > sh run Please wait... (up to a minute)module serial 1 cable_type v35 clock_rate 2000000 crc 16 mode dte clock_source line data_mode normal exit serialinterface ethernet 0 description "Bitumen LAN" ip address 10.113.250.254 255.255.255.192 mtu 1500 qos exit qos exit ethernetinterface ethernet 0.1 description "Nortel Phones" ip address 18.113.119.4 255.0.0.0 exit ethernet interface ethernet 1 description "KDN link to HQ" ip address 172.16.18.2 255.255.255.252 mtu 1500 qos add_class NortelRTP root-out cr 40 br 128 add_class NortelDATA root-out cr 88 br 128 class NortelRTP add_src_ip 172.16.18.0 255.255.255.192 exit class class NortelDATA exit class enable policing outbound enable policing inbound exit qos exit ethernetinterface bundle Bitumen exit bundleinterface bundle bitumen exit bundle hostname R-KEN-BITU-001log utctelnet_serverssh_server exit ssh_servertelnet_banner banner1 "TOTAL KENYA LIMITED" banner2 "BITUMEN PLANT" exit telnet_bannersystem display-boot-config noip load_balance per_flow route 0.0.0.0 0.0.0.0 172.16.18.1 1 dhcps pool Total-Bituen exclude-range 10.113.250.244 10.113.250.254 exit pool pool Total-Bitumen domain total_kenya_hdq.com dnsserver 10.113.118.5 tftpserver 10.113.255.39 netbios_name_server 10.113.118.5 lease 604800 network 10.113.250.192 255.255.255.192 default_router 10.113.250.254 commit exit pool interface ethernet0 enable exit dhcps exit ipfirewall global algs exit algs max-connection-limit self 2048 exit firewallfirewall internet exit firewallfirewall corp policy 1024 out permit exit policy exit firewalltftp_servergui enable exit guisnmp-server snmp-enable community bituro ro community biturw rw location Bitumen-Plant chassis-id R-KEN-BITU-001 trap-version 1 exit snmp-server please assist in any way as im being fried on this... please thank you

Oct 29, 2008 | Nortel NETWORKS CONTIVITY 1100 T1 WAN BNDL...

See all Nortel NETWORKS CONTIVITY 1100 T1 WAN BNDL 5 Questions

Nortel NETWORKS CONTIVITY 1100 T1 WAN BNDL 5 Router Logo

Related Topics:

335 people viewed this question

Ask a Question

Usually answered in minutes!

Top Nortel Routers Experts

Les Dickinson
Les Dickinson

Level 3 Expert

18298 Answers

Mike

Level 3 Expert

4331 Answers

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers

Are you a Nortel Router Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...