Question about Nikon Coolpix 5700 Digital Camera

1 Answer

Nikon Capture 3 and Mac OS X 10.2 Installer Issue

Posted by Anonymous on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Novelist:

    An expert who has written 50 answers of more than 400 characters.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 79 Answers

On Friday August 23, 2002 Apple released an updated version (Mac OS 10.2) to the Mac operating system. While we are NOT yet announcing compatibility information we do have the following information regarding one issue. Mac OS X has a built-in feature that scans items as they are installed to check for security issues. When Nikon Capture 3.0 is installed the dialog box below will display indicating a possible issue. If the user clicks "Fix and Use" the dialog will be dismissed and the application will run as expected. If the "Use" button is clicked the application will run fine untilthe Mac has been restarted at which time the same dialog will appear. If "Don't Use" is clicked Capture 3 can not be started. A future version of the Nikon Capture installer will prevent this. As compatibility and usage information is available I will update you on Nikon software and OS compatibility.

Posted on Aug 29, 2005

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I forgot my admin password for mac book 10.5.8


Tina, Follow instruction from the links below to reset password.
"I hope this helped you out, if so let me know by pressing the helpful button. Check out some of my other posts if you need more tips and info."
admin password change OS 10 5 8
forgot the password to Mac OS 10 5 8 Leopard How can reset it
How to reset your Mac OS password without an installer disc

May 02, 2016 | Computers & Internet

1 Answer

Download installation cd


As far as I know, there are no legitimate download sites for the Mac OS 10.x installer. For your computer, you'd want an OS 10.5 installation disk set. You can find them on eBay for about $50 or so.

Jul 03, 2013 | Apple iMac G5 Desktop

1 Answer

Can not run Nikon Capture 3 - "Updated Driver Required"


Under some limited conditions, Nikon Capture 3 will fail to launch after the initial installation and you will not be presented with the opening dialog which allows you to select either "Trial" mode or be permitted to enter your serial key. A dialog box is displayed indicating that updated drivers are required, but the names of these drivers are not listed. This installer replaces two files with updated versions which resolves this issue and allows Nikon Capture 3 to launch. Do not install this update if you are already running Nikon Capture in trial or registered mode. This update is not required for any version of Nikon Capture other than 3.0. This updater is not needed for Macintosh users. After downloading and decompressing, double click the "Setup" application to install. http://www.nikonusa.com/software/Cap3update.zip

Aug 30, 2005 | Nikon Coolpix 5000 Digital Camera

1 Answer

D100 Driver Update


What is this? This is an updater to the D100 driver module. This is needed for users who have Nikon Scan 3.1.2 and Nikon Capture 3.0 installed regardless of whether or not a Nikon D100 is used. This updater will fix an error relating to a "D100.md3" file. This update is not needed for Macintosh users. What’s new? The following issue has been addressed: This update fixes an issue that causes Nikon Scan to unexpectedly quit during software startup. All users of Nikon Scan and Nikon Capture should install this update. Compatible OS: Microsoft Windows 98 Second Edition Microsoft Windows Me Microsoft Windows 2000 Professional Microsoft Windows XP Professional Microsoft Windows XP Home Edition *All pre-installed models only What’s included in the download? “D100_driver.zip” Special notes: Installation: When the file, “D100_driver.zip” is downloaded, it should be automatically decoded to create the installer “D100UPDATER_E.EXE”. Run this application to install the upgrade. http://www.nikonusa.com/software/D100_driver.zip

Aug 30, 2005 | Nikon D70 Digital Camera with 18-50mm Lens

1 Answer

Problem installing Nikon View - "Locale does not match" error


When the Nikon installer runs it checks for certain files before performing the update. If it cannot find the require files it displays the "...locale does not match..." error. Verify the following if you experience this problem: Be sure that both the original Nikon View install and the new Nikon View/Capture Updater were both downloaded from the Nikon USA web site. There are known issues when two different regions are used for downloading the software. If either were downloaded from the incorrect web site re-download from the Nikon USA Technical KDB Download Page. http://www.nikonusa.com/software Verify that the installation was run while booted into Mac OS X. You CAN NOT install while booted into OS 9 and simply copy the application to the OS X "Applications" folder. Use the "System Preferences" (OS X) or "Control Panels" (OS 9) and "Startup Disk" to start up in OS X and then install Nikon View and Capture and then after restarting run the combined updater.

Aug 30, 2005 | Nikon Coolpix 3200 Digital Camera

1 Answer

Can not run Nikon Capture 3 - "Updated Driver Required"


Under some limited conditions, Nikon Capture 3 will fail to launch after the initial installation and you will not be presented with the opening dialog which allows you to select either "Trial" mode or be permitted to enter your serial key. A dialog box is displayed indicating that updated drivers are required, but the names of these drivers are not listed. This installer replaces two files with updated versions which resolves this issue and allows Nikon Capture 3 to launch. Do not install this update if you are already running Nikon Capture in trial or registered mode. This update is not required for any version of Nikon Capture other than 3.0. This updater is not needed for Macintosh users. After downloading and decompressing, double click the "Setup" application to install. Click here to agree to license and Download the Capture 3 Installer Update http://www.nikonusa.com/software/Cap3update.zip

Aug 29, 2005 | Nikon Coolpix 5700 Digital Camera

1 Answer

D100 Driver Update


What is this? This is an updater to the D100 driver module. This is needed for users who have Nikon Scan 3.1.2 and Nikon Capture 3.0 installed regardless of whether or not a Nikon D100 is used. This updater will fix an error relating to a "D100.md3" file. This update is not needed for Macintosh users. What’s new? The following issue has been addressed: This update fixes an issue that causes Nikon Scan to unexpectedly quit during software startup. All users of Nikon Scan and Nikon Capture should install this update. Compatible OS: Microsoft Windows 98 Second Edition Microsoft Windows Me Microsoft Windows 2000 Professional Microsoft Windows XP Professional Microsoft Windows XP Home Edition *All pre-installed models only What’s included in the download? “D100_driver.zip” Special notes: Installation: When the file, “D100_driver.zip” is downloaded, it should be automatically decoded to create the installer “D100UPDATER_E.EXE”. Run this application to install the upgrade. http://support.nikontech.com/cgi-bin/nikonusa.cfg/php/enduser/std_adp.php?p_faqid=183&p_created=1029875958&p_sid=-u9YedOh&p_lva=7128&p_sp=cF9zcmNoPTEmcF9zb3J0X2J5PSZwX2dyaWRzb3J0PSZwX3Jvd19jbnQ9MzcmcF9wcm9kcz0xLDImcF9jYXRzPTE4NCZwX3B2PTIuMiZwX2N2PTEuMTg0OzIudTAmcF9zZWFyY2hfdHlwZT1hbnN3ZXJzLnNlYXJjaF9ubCZwX3BhZ2U9MQ**&p_li=&p_topview=1

Aug 29, 2005 | Nikon Coolpix 5700 Digital Camera

1 Answer

Problem installing Nikon View - "Locale does not match" error


When the Nikon installer runs it checks for certain files before performing the update. If it cannot find the require files it displays the "...locale does not match..." error. Verify the following if you experience this problem: Be sure that both the original Nikon View install and the new Nikon View/Capture Updater were both downloaded from the Nikon USA web site. There are known issues when two different regions are used for downloading the software. If either were downloaded from the incorrect web site re-download from the Nikon USA Technical KDB Download Page Verify that the installation was run while booted into Mac OS X. You CAN NOT install while booted into OS 9 and simply copy the application to the OS X "Applications" folder. Use the "System Preferences" (OS X) or "Control Panels" (OS 9) and "Startup Disk" to start up in OS X and then install Nikon View and Capture and then after restarting run the combined updater.

Aug 29, 2005 | Nikon Coolpix 5700 Digital Camera

Not finding what you are looking for?
Nikon Coolpix 5700 Digital Camera Logo

Related Topics:

84 people viewed this question

Ask a Question

Usually answered in minutes!

Top Nikon Cameras Experts

Steve

Level 3 Expert

3289 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

Jeff Marcus

Level 2 Expert

115 Answers

Are you a Nikon Camera Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...