Question about RCA Universal Remote Control

1 Answer

Remote cant get the code two work

Posted by on

  • Anonymous Aug 24, 2008

    reprogram remote

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 2,071 Answers

Http://www.hifi-remote.com/ofa/codes-tv.shtml#tv

If none of the codes work then we have two other solutions:

1. Searching For Your Code

If you have tried all of the set-up codes for your brand of equipment ,or yourbrand is not listed, and you are still not able to get the unit to respond, trythe following procedure to search for your code.
If you don't find a code that works, the remote will flash four times when youreach the end of all the codes for this device type.

  1. PRESS the button for the device you want to program, (TV, VCR, CABLE, etc.), then RELEASE.
  2. PRESS and HOLD the SETUP button until the red LED flashes twice, then RELEASE.
  3. ENTER 9-9-1 (two blinks on the remote)
  4. ALTERNATE slowly between the POWER key and the DEVICE (TV, VCR, CABLE, etc.) button until your device turns off. (On VCR, LD, and CD players use PLAY instead of POWER)
    Make sure that the remote is pointed at your device during the search, You may have to press this sequences of buttons up to 100 times to search the entire library of codes.
  5. When your device turns OFF, PRESS the SETUP button and RELEASE it to lock in the code for your device.

2. Learn the buttons from the original

Line up your original remote and the head-to-head before completing thefollowing steps.
  1. PRESS and HOLD the SETUP button until the red LED flashes twice.
  2. PRESS 9 - 7 - 5, the red LED will flash twice.
  3. PRESS the DEVICE key where you wish to learn the function. The next 3 steps must be completed within 10 seconds.
  4. PRESS the button that will receive the learned function, the LED will flash rapidly.
  5. PRESS the button on the original remote to be learned.

Now you can repeat steps 3 through 5 to learn other functions onto other keysor press and hold SETUP until the Cinema's red light flashes twice to lock inyour new feature. (If the red light does not blink twice, stop and repeat stepsthrough 6).
To test the new feature, press and release the device key in which the newfeature was learned followed by the key on which the feature was learned

More help for programming your remote can be found here:
http://www.hifi-remote.com/manuals/ofa-l.shtml?URC-7800#device

Hope that helps! Should you have any further questions,please feel free to post them here.
Television Video - DVD Audio Satellite Set Top Box Video - VCR Brand: Model (optional): remote - clip_image001.gifWe could not find an exact match, we think this code will work. 10054 clip_image001.gifSetup Instructions
· Set the "Mode Switch" to TV.
· Press and hold the "Mute" button and the "Select" button until the visible LED blinks twice.
· Enter the 5 digit Code above.
· Try your new code and tell us how it worked!
You'll have to settle for that, use the middle power key in the tv device to power on & off the tv.


hope this may help;

Regards,
VOTIT

DON'T FORGET TO RATE;

Posted on Aug 25, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I want to know the code for a seiki television for a illumibeam jumbo universal remote


An applicable code would be in the remote. If code search doesn't work, you may have to try a different universal remote. All universal remotes do not contain all possible codes.

Jan 09, 2017 | Universal Televison & Video

1 Answer

One for all universal remote i am trying to program my seiki television. I lost the original remote and the power button on the television is broken so I cant turn the television on


Always better to buy a genuine replacement. The problem is that if I remember correctly, Seiki don't actually make the television, which is why it never features in the Remote Code Lists. I have just checked three sites.

http://codesforuniversalremotes.com/3-digit-universal-remote-codes-for-tv/

http://removeandreplace.com/2013/11/10/universal-remote-control-codes-list/


Brand new original SEIKI seiki TV Remote control work for almost all ...

https://www.amazon.ca/original-SEIKI-Remote-control-almost/dp/B00BJ2MC0E
I gave my mother a sieki television for Christmas my two little girls are always using the remote and letting it drop so I needed to find a replacement remote asap.

SEIKI TV Remote Controls ' SEIKI Replacement Remotes for TV, DVD ...

https://www.replacementremotes.com/SEIKI/Remote-Controls/ ReplacementRemotes.com offers SEIKI remote controls for sale online including remote controls for TV and many more.
Google seiki remote control codes

Jan 09, 2017 | One For All Televison & Video

1 Answer

One for all universal remote I need the code to program my seiki tv


here you go


Product Support For One for All Remotes.

Q: I'm trying to set up my cable/satellite/universal remote to work with your television. What is the manufacturer's code for my SEIKI TV?
A: Cable and Satellite content providers control the remote codes, and we apologize for any confusion during the remote programming. Please try the following codes:
DIRECTV - 10178 11687, 10178, 10835, 10056, 10150, 10463, 10156, 11498, 11401, 0178,
Time Warner Cable - 0178
Philips - 0002
Comcast - 11864, 10178, 0060
Cox Communications - 0178
Atlas DVR Device URC - 0178
Bell Remotes & Dish Network - 505, 506, 516, 523, 526, 566, 573, 612, 627, 647, 652, 653, 654, 655, 656, 658, 659, 664, 665, 667, 669, 670, 679, 680, 704, 717, 730, 738
ATT U-verse - 1004
Hitachi - 0002
URC- 2964, 0145
Cablevision customer (optimum)- 004
Bose or universal remotes- LG remote code
Universal Remote - One For All OARC04G 4 Device Universal Remote (Element code)
These codes may not work on some universal remotes. If there is another code listed for SEIKI Digital in your universal remote control guide, please try that code. Refer to the Remote Control Guide under your TV's model number for more information.

Jan 09, 2017 | One For All Televison & Video

1 Answer

Remote code for Samsung AA59-00652A


Set-up (Programming) procedure is too much to type in here, and is not practical and it will differ brand-to-brand remote controls. If you wish to get more; check the sites linked here. The site has set-up code list & set-up procedure to many popular brand remote controls. The site has general set-up codes to check with TVs and other devices are given, in the order of the 'device's brand name list' in alphabetical order. Set-up code list to many brand remote controls also is given. Pull up older posts. Search the sites by type in the brand name to your device in its search box at the top right part of the display window. It will help you to find the document easily.
http://remotesearch.blogspot.com/
http://electronicshelponline.blogspot.com/
http://electrohelponline.blogspot.com/
Programming Notes
• If your device does not respond to the remote after trying all codes listed or your brand is not listed in the code list, use the Auto Code Search method to program your remote.
• Sometimes the first code that "works" with your device may operate only a few functions of your device. There may be another code in the code list that performs more functions. Try other codes from the code list for more functionality.
This is a trial and error procedure; and quiet time consuming. You might have to check different codes said for your device.
Search the site by type in the "brand name" to your device; to which you want set-up codes; in the "Search box at the top right of the display window" to get gathered related posts. .

Jan 08, 2017 | Samsung Televison & Video

1 Answer

Changhong tv remote code


Set-up (Programming) procedure is too much to type in here, and is not practical and it will differ brand-to-brand remote controls. If you wish to get more; check the sites linked here. The site has set-up code list & set-up procedure to many popular brand remote controls. The site has general set-up codes to check with TVs and other devices are given, in the order of the 'device's brand name list' in alphabetical order. Set-up code list to many brand remote controls also is given. Pull up older posts. Search the sites by type in the brand name to your device in its search box at the top right part of the display window. It will help you to find the document easily.
http://electro-medical.blogspot.com/

Jan 07, 2017 | Televison & Video

1 Answer

Hello, The Original remote quit working, So I bought a RCA universal remote control RCR314WZ. I need the code for (DTA800B1 B1L) converter box. so the remote will control it


Some RCA universal remotes list STB codes but you can try using code search to find something that can handle some or all functions. If a search through all codes contained in the remote does not succeed, you may have to try a different universal remote. All universal remotes do not contain all possible codes.

Jan 07, 2017 | RCA Televison & Video

1 Answer

None of the codes are working to set up my xfinity remote to adjust the volume. Is there a code that isn't listed?


No as the codes listed are for the settings in the remote if the code listed doesn't control the volume you need to get an updated newer remote with all the newer code sets
As you may find that one code controls the channel and another may control the volume and will be unable to use them at the same time

Jan 07, 2017 | Televison & Video

1 Answer

Program codes using Directv remote for Genesis 506 IM4 Digital Fusion 5.1?


Set-up (Programming) procedure is too much to type in here, and is not practical and it will differ brand-to-brand remote controls. If you wish to get more; check the sites linked here. The site has set-up code list & set-up procedure to many popular brand remote controls. The site has general set-up codes to check with TVs and other devices are given, in the order of the 'device's brand name list' in alphabetical order. Set-up code list to many brand remote controls also is given. Pull up older posts. Search the sites by type in the brand name to your device in its search box at the top right part of the display window. It will help you to find the document easily.
http://remotesearch.blogspot.com/
http://electronicshelponline.blogspot.com/
http://electrohelponline.blogspot.com/
Programming Notes
• If your device does not respond to the remote after trying all codes listed or your brand is not listed in the code list, use the Auto Code Search method to program your remote.
• Sometimes the first code that "works" with your device may operate only a few functions of your device. There may be another code in the code list that performs more functions. Try other codes from the code list for more functionality.
This is a trial and error procedure; and quiet time consuming. You might have to check different codes said for your device.
Search the site by type in the "brand name" to your device; to which you want set-up codes; in the "Search box at the top right of the display window" to get gathered related posts.

Jan 07, 2017 | Directv Televison & Video

1 Answer

Can i buy remote control


If you wish to buy its original remote control, contact the authorized service centre, or authorized dealer to your device brand. They can either give you a genuine remote control to your device, or can direct you, from where can you purchased a suitable one.
To select a proper universal remote control, you should know about the number of digits to its set-up codes. There are 3 digit, 4 digit, 5 digit, 2 digit and even single digit codes, to some brand devices. After confirming this, check the sites linked here. Both the sites have set-up code list and set-up procedure to many popular brand remote controls. Check which brand remote control has set-up code/s to your device brand, and buy that one according to availability? Brand name of the remote control isn't a matter, but it should have set-up codes in its code list, to the device brand you have.
Please note: Every new universal remote control will have set-up code list, and set-up procedure along with its pack. Never accept a remote control, that hasn't both of this. For more details about the set-up codes, visit the site http://electrohelponline.blogspot.com/ Check this site too. http://remotesearch.blogspot.com/ If you see these sites by "MOSAIC" or "Magazine" view will make surf easier. Or type in the brand name of your device in the search box, and press "Enter".
Universal remote controls are available at most of the electronic spare part selling shops.

Jun 23, 2014 | Televison & Video

12 Answers

Comcast remote code for 42in sharp aquos lcd


the 10093 code worked perfectly!!! YOU ROCK! the codes in the comcast manual dont work. i don't have an aqquos, but a regular sharp hdtv... purchased in nov '07

Dec 14, 2007 | Televison & Video

Not finding what you are looking for?
Televison & Video Logo

42 people viewed this question

Ask a Question

Usually answered in minutes!

Top RCA Televison & Video Experts

The Knight
The Knight

Level 3 Expert

71635 Answers

matt martin
matt martin

Level 3 Expert

1207 Answers

Jaime Hernandez

Level 3 Expert

2294 Answers

Are you a RCA Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...