Problem with the JVC TV. HDTV LCD Television I have a message that says no signal o signal everytime i turn on my TV. It takes a long time to load and i dont know what to do. Please help me fix this problem

SOURCE: Black & White

check the return policy and return it as soon as possible

SOURCE: How do i get the cable to show on my tv it says no signal

do auto tunning,press menu & select tunning proses

Bud Martin

• 11361 Answers
• Posted on Jul 09, 2010

SOURCE: jvc 26 inch lcd tv won't turn on

If you are going to DIY and have proper tools and know safety precaution then please read on:

Please see my basic troubleshooting guide here:
http://www.fixya.com/support/r5093881-lcd_flat_panel_tv_troubleshooting_guide

http://s807.photobucket.com/home/budm/allalbums

http://en.wikipedia.org/wiki/Capacitor_plague

Parts: www.shopjimmy.com

John Long

• 153 Answers
• Posted on Oct 17, 2010

SOURCE: i have a living solution

Try this for a quick fix. If this doesnt work repost and we will dig deeper lol

Make sure you have device turned on.
Hold the device button you want to program for 3 seconds & release.
Push & release the power button & the red light will remain lit.
Push the CHANNEL UP button over & over slowly until the device turns off.
When device turns off press OK button

SOURCE: I have a 42" JVC LCD television that I use for

No,sorry.U can't not fixed this problems beside changing the whole tv LCD sceen panel it is not econmicial to change the tv LCD screen panel,because the LCD screen panel cost almost the as a new tv itself .This it is call "screen burn in" the image it there for good sorry.