Question about Nortel T7316E 2-Line Corded Phone

2 Answers

Conference Calls Can you send me written instruction on how to make a three way conference call? ltrivett@theeastongroup.com Thanks, Lenette

Posted by on

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 4 Answers

To establish a conference call between yourself and two other parties.
1. Make or answer the first call.
2. Put the first call on hold.
3. Make or answer the second call.
4. After the second call is connected, press feature button then 3.
5. Press the line or intercom button of the first held call (not required on the
T7100/M7100 telephone).
6. Press Release to end the conference call.
To remove yourself from a conference permanently
(unsupervised conference):
Press feature buton then 70. The other two callers remain connected. (Some
external lines may not support this feature. See your system
administrator.)
To put a conference on hold:
Press hold. The other two callers can still talk to each other.
To split a conference:
Press the line or intercom button of one caller to consult privately while
the other caller is on hold. To re-establish the conference, press
feature button then 3.
To disconnect one party:
Press the line or intercom button of the caller you want to disconnect,
then press Release button. Press the line or intercom button of the remaining
caller to resume your conversation.

Posted on Oct 29, 2008

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that has over 10 points.

    Welcome Back:

    Visited the website for 2 consecutive days.

  • Contributor
  • 2 Answers

To make the three way call. follow the steps that Vitaly has told. But many times it is seen that the audio quality is very poor and also the service that you have taken is very poor responsive. So, the best service I would suggest you is the "easyconferencecalls.uk". Once you have generated your pin you can use it for the lifetime of our service. As soon as you have entered your email into the PIN generation system you will be redirected to a page with your PIN code and a step by step guide to get you started. Meanwhile, they will email you a copy of your account details for future use. You will get the Free Conference Call Facility.

Posted on Dec 08, 2016

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I need a card for conference calls. where can i get one and for how much.


Conference calls can be made for free.

To set up a conference call:
  1. Dial 305 848 8888
  2. Select "Set up a Conference Call" and follow the prompts.
You will create a password and will be given a 10 digit code.
Distribute the code, time of call, and dial in number (305 848 8888) to all conference call attendees. You may use the access code for any future conference calls as well.
To join a conference call:
  1. Dial 305-848-8888
  2. Select "Join a Conference Call"
  3. Enter the pin

Nov 14, 2013 | magicjack.com

1 Answer

Hi, I have Samsung Galaxy Pop (CDMA ), am n't able to conference plz send me the process to conference call asap..... Thanks in advance


To make conference call, call a number wait until answer if answer dial again another number do not end all active calls just hold and dial again as long as five numbers then, go to option select conference.

Sep 23, 2011 | Samsung Galaxy S GTI9000 Smartphone

1 Answer

How do I use the conference call feature? Thanks so much. I need to make a conference call in an hour so I'd appreciate a response asap!


Here's a link that has your manual which should give you specific instructions for conference calls.

http://www.retrevo.com/support/Panasonic-KX-TG2740S-Telephones-manual/id/1074ci771/t/2/

Jan 12, 2011 | Panasonic KX-TG2740 Cordless Phone

1 Answer

How do you make a conference call I have a thomson consumer electronics model 29432b conference calls


when making call put the person on hold, dial another number, scroll down the phone and go to a conference call it will connect the three phones together.

May 27, 2010 | Lands Phones

2 Answers

Three party conference call


Once you receive your first call Press conference button. your first call will automaticaly be on hold. Press a line button to dial second number. Once call is connected Press conference button and you will have 3 way conference.
To add more PeoPle into conference Press conference button again and select a new line. Dial the number and Press conference button to connect everyone to that conference.

HoPe this helPs

Jul 17, 2009 | AT&T Lucent MLS-12D Phone

1 Answer

HOW TO DO A CONFERENCE CALL


Here are the instructions for making a conference call on a Norstar system.

Conference [Feature] [3]


  • Establish a conference call between yourself and two other parties.
1. Make or answer the first call.
2. Put the first call on hold.
3. Make or answer the second call.
4. After the second call is connected, press [Feature] [3].
5. Press the line or intercom button of the first held call.
6. Press [Rls] to end the conference call
  • To remove yourself from a conference permanently (unsupervised conference):
    • Press [Feature] [7] [0]. The other two callers remain connected. (Some external lines may not support this feature.)
  • To put a conference on hold:
    • Press [Hold]. The other two callers can still talk to each other.
  • To split a conference:
    • Press the line or intercom button of one caller to consult privately while the other caller is on hold. To re-establish the conference, press [Feature] [3].
  • To disconnect one party:
    • Press the line or intercom button of the caller you want to disconnect, then press [Rls].
    • Press the line or intercom button of the remaining caller to resume your conversation.
  • To independently hold two calls:
    • Press the line or intercom button of the first caller, then press [Hold]. The second caller is automatically put on hold. To re-establish the conference, retrieve one call from hold, press [Feature] [3], then retrieve the second call from hold.

May 14, 2009 | NorStar M7324 Telephone

1 Answer

Conference calls


Press the conference button, dial your third party, once connected, press conference again, that will bring all parties together.

Nov 18, 2008 | Lands Phones

2 Answers

Conference Calls/Transfer


Conference [Feature] [3]

  • Establish a conference call between yourself and two other parties.
1. Make or answer the first call.
2. Put the first call on hold.
3. Make or answer the second call.
4. After the second call is connected, press [Feature] [3].
5. Press the line or intercom button of the first held call.
6. Press [Rls] to end the conference call

  • To remove yourself from a conference permanently (unsupervised conference):
    • Press [Feature] [7] [0]. The other two callers remain connected. (Some external lines may not support this feature.)

May 21, 2008 | NorStar Meridian M7310 Phone

1 Answer

Can't get the conference call to work on the etw-16dc-2


With a call in progress, press CONFERENCE, dial the internal or external number (you may have to dial 9), then press CONFERENCE again. This will join the three together.
Note: for two external calls, your extension must have the ability to access more than one outside line.

Jan 23, 2008 | NEC Electra Professional ETW-16DC-2

1 Answer

Conference call (how to use)


With a call in progress, press CONFERENCE, dial the internal or external number (you may have to dial 9), then press CONFERENCE again. This will join the three together.
Note: for two external calls, your extension must have the ability to access more than one outside line.

Jan 23, 2008 | NEC Electra Professional ETW-16DC-2

Not finding what you are looking for?
Nortel T7316E 2-Line Corded Phone Logo

829 people viewed this question

Ask a Question

Usually answered in minutes!

Top Nortel Lands Phones Experts

george  peters
george peters

Level 3 Expert

860 Answers

dan4261

Level 1 Expert

14 Answers

Shehu Pro
Shehu Pro

Level 3 Expert

1284 Answers

Are you a Nortel Lands Phone Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...