Question about Canon PowerShot SD10 / IXUS I Digital Camera

1 Answer

Error 18 I am getting an error 18 code what should I do?

Posted by Anonymous on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Sergeant:

    An expert that has over 500 points.

  • Expert
  • 255 Answers
Re: Error 18

The "E18" error code indicates an error that involves the lens unit or lens cover. This error may appear where the lens is prevented from properly extending or retracting such as, for example, when pressure is applied to the lens or the area surrounding the lens while handling the camera. The error may also be displayed if the lens unit/camera has been subjected to an external shock, or if a foreign substance (i.e. liquid, sand, dirt) enters the camera. Solution Check the following when you operate the camera to avoid applying pressure to the lens and surrounding area: - Hold the camera so that your fingers do not touch the lens unit when you are shooting. - Make sure the camera is off before you put it back in the case. Exercise caution to ensure that the camera does not accidentally power on while the camera is stored inside the case.

Posted on Aug 29, 2005

Add Your Answer

0 characters

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...
3 Points

Related Questions:

1 Answer

Error E000007 code means


The code is for: Fix film rotation error. Replace the unit then reset the code.

Aug 31, 2015 | Canon Digital Rebel / EOS-300D Digital...

1 Answer

What happens when I get Error code 20 on a canon rebel eos rebel t3i 600d?


From the Canon owner's manual:

"Error codes 10, 20, 30, 40, 50, 60, 70 and 80: Shooting is not possible due to an error. Turn the camera off and on again or re-install the battery. Operate the power switch, remove and install the battery pack again, or use a Canon lens (p.32, 28)."

Jun 17, 2014 | Canon EOS 30D Digital Camera with 18-55mm...

1 Answer

"error code" r33


Is this keeping you from shooting? Normally this is an informational message telling you how many more shots you can take in the current burst before the buffer fills up and the camera has to stop shooting and write to the memory card.

Sep 09, 2013 | Nikon D90 Digital Camera with 18-105mm...

1 Answer

Error message Chr


Having received no response in over a month, I assume this is no longer a problem.

May 15, 2010 | Nikon D90 Digital Camera with 18-105mm...

1 Answer

F error code


Check the contacts on the camera and the lense.
This error means there is a communication error with the lense or it thinks that the lense is stopped down. Since its a G lense it cant be stopped down manually its gotta be some sort of communication issue. The electrical contact pins are springy and stick so they don't fully extend sometimes. This will improve with wear as the plastic channel is a bit too small and is holding the pin in the retracted position - repeated use will get the channel to get larger. I fixed mine by working the pins in and out manually until they all reliably sprung into position. Removing the lens a few times and fiddling with the contacts seems to have solved the problem..You can check by moving the lens when it is mounted to see if you can replicate the error.

Dec 21, 2009 | Nikon D90 Digital Camera with 18-105mm...

1 Answer

Error #18 Lens will not close and camera shuts off


Hey louboyens,
According to the manufacturer error code 18 is a lens error code. What that means is something is obstructing the movement of the lens. I would make sure that your hands or anything else is not preventing the lens from moving correctly when your powering the camera on, and make sure the camera is powered off and not powering on while in your camera bag. Try turning it off and back on and after this the camera still displays the error code you should probably have it looked at by an authorized service technician.

Sincerely,
Allan
Go Ahead. Use Us.

May 15, 2008 | Canon PowerShot SD550 / IXUS 750 Digital...

1 Answer

Error 300d


An error?

What's it? How?
Was it the code "ERR 99"?

Feb 13, 2008 | Canon Digital Rebel / EOS-300D Digital...

1 Answer

Error 18


The "E18" error code indicates an error that involves the lens unit or lens cover. This error may appear where the lens is prevented from properly extending or retracting such as, for example, when pressure is applied to the lens or the area surrounding the lens while handling the camera. The error may also be displayed if the lens unit/camera has been subjected to an external shock, or if a foreign substance (i.e. liquid, sand, dirt) enters the camera. Solution Check the following when you operate the camera to avoid applying pressure to the lens and surrounding area: - Hold the camera so that your fingers do not touch the lens unit when you are shooting. - Make sure the camera is off before you put it back in the case. Exercise caution to ensure that the camera does not accidentally power on while the camera is stored inside the case.

Aug 31, 2005 | Canon PowerShot SD300 / IXUS 40 Digital...

Not finding what you are looking for?
Canon PowerShot SD10 / IXUS I Digital Camera Logo

Related Topics:

58 people viewed this question

Ask a Question

Top Canon Digital Cameras Experts

Doberman

Level 2 Expert

246 Answers

Tony

Level 3 Expert

2598 Answers

halotheracer
halotheracer

Level 2 Expert

68 Answers

Are you a Canon Digital Camera Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...