Question about Sony SLV-D350P DVD Player/VCR
I found this on a forum on line but it doesn't look promising. One person said this worked and one other said it didn't - only two entries though.
1)No disc & tray closed
2)Once the "Insert disk" message in the top-left side of the screen appears, press (in the remote) the Subtitle key and continue with 29334 in sequence.
3)A number(1 in my case)appears in the top-left side of the screen. I believe that this number represents the region code of your DVD equip.
4)Change the number by typing number 0.
5)To save press the "open/close" key and then Enter (small one at the top. Not the big one at the bottom!!)
6)Now check if it works.
NOTE: Other way to check if the change was successful, is to repeat steps 1 to 2. You should then see a 0 in top-left side of the screen.
Posted on Aug 22, 2008
Hi there, please get the code here : www.regionfreedvd.net/ www.dvdripper.org/dvd-region-codes-vs-ntscpal/ www.regionfreedvd.net/players.html
Best Regards, Jay_4r5f
Posted on Feb 27, 2011
Tips for a great answer:
May 14, 2012 | Sony SLV-D350P DVD Player/VCR
Nov 17, 2010 | Sony SLV-D350P DVD Player/VCR
Dec 27, 2009 | Sony SLV-D350P DVD Player/VCR
Dec 21, 2009 | Sony SLV-D350P DVD Player/VCR
Dec 18, 2009 | Sony SLV-D350P DVD Player/VCR
Nov 20, 2009 | Sony SLV-D350P DVD Player/VCR
350 people viewed this question
Usually answered in minutes!