Question about Canon PIXMA MP210 Photo All-In-One Printer

2 Answers

E5 and 2,114,0 errors on Canon MP160

I've just bought a second hand MP160,which I only intended to used as a scanner.
I can't get the scanner to operate due to an E5 error on the display,and a 2,114,0 error which appears as a pop-up when I attempt to scan.

Although empty,the cartridges are of the correct type and are seated properly.

When I remove the cartridges completely the error codes do not change.

Is an empty cartridge enough to cause this issue?

Many thanks. My cartridges was empty and I just refilled the black one and took the color one out, becouse I don`t use it that often. Now an error E16 appeared and the color ink alarm is on, but it won`t do anything now. I checked the manual and can`t seem to find anything that helped. Please help.
Thank you.
Esté Heyns

Posted by on

  • Anonymous Feb 14, 2009

    yes same

×

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

Press resume botton for ten seconds or more the mp210 will work

Posted on Sep 18, 2008

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

Same problem here, resuming does NOT work. Regards, Irina.

Posted on Dec 24, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My Canon PIX MA Mp160 wont scan i got this error it says error in scanner turn of scanner and error code is 61,34,0


Normally MP160 cannot scan is either USB cable faulty, LOGIC BOARD ASSY faulty, software corrupted or SCANNER UNIT faulty.

May 26, 2010 | Canon PIXMA MP160 All-In-One InkJet...

1 Answer

Bought used canon mp160 however did not get a


You can download some of the drivers and such from Canon. I installed a used MP160 on a Mac by downloading the scanner driver, printer driver, MP Navigato program, and "on screen manual" (a help file). There are similar downloads for Windows. Unfortunately they don't have the OmniPage SE software for download so you can't do OCR.

Oct 07, 2009 | Canon PIXMA MP160 All-In-One InkJet...

2 Answers

My MP160 gives error E 5 i have been using


hi,
CANON PIXMA MP160 All-In-One InkJet Printer
has few common problems. Such as Driver CD lost, Scanner does not work, Connection problem etc. For find all these software solution just click here....
75aba9d.jpg3f22050.jpg

http://www.canon.com/printer/prob676ijt65/solution

ppobmi6

Jul 12, 2009 | Canon PIXMA MP160 All-In-One InkJet...

2 Answers

Image won't scan


hi,
CANON PIXMA MP160 All-In-One InkJet Printer
has few common problems. Such as Driver CD lost, Scanner does not work, Connection problem etc. For find all these software solution just click here....
75aba9d.jpg3f22050.jpg

http://www.canon.com/printer/prob676ijt65/solution

tonl-i-21

Apr 07, 2009 | Canon PIXMA MP160 All-In-One InkJet...

2 Answers

E5 and 2,114,0 errors on Canon MP160


Empty cartridges may cause this error. Here is the error code list for your printer

E2-2 = No paper (ASF)
E3-3 = Paper jam
E4 = No ink
E5-5 = The ink cartridges are not installed or a non-supported ink cartridge is installed, or the ink cartridges are not installed properly
E8 = Waste ink absorber full, or platen waste ink absorber full
E9 = The connected digital camera / video camera does not support Camera Direct Printing
E14 = The Ink cartridges whose destination are wrong
E15 = Ink cartridge is not installed E16 - Ink remaining is unknown
E16 -E19 = Failed to scan head alignment sheet
E22 = Carriage error
E23 = Paper feed error
E24 = Purge unit error
E25 = ASF(cam) sensor error
E26 = Internal temperature rise error
E27 = Waste ink absorber full or platen waste ink absorber full
E28 = Ink cartridge temperature rise error -
E29 = EEPROM error
E33 = Paper feed position error
E35 15 = USB Host VBUD overcurrent error - USB
E37 17 = Abnormal motor driver error
E40 20 = Other hardware error
E42 22 = Scanner error


If I could be of further assistance, let me know. If this helps or solves the issue, please rate it.
Thanks, Joe

Nov 13, 2008 | Canon PIXMA MP160 All-In-One InkJet...

4 Answers

To get ride of Canon Pixma MP160 Service error 5010.........!!!


Pliz help me out and fix the service error 5010 which i get as soon as i turn on my printer and due to which the alarm light starts blinking, i'm helpless coz either my printer or Scanner isn't working, so pliz stretch out your helping hand in order to let me get ride of this.
Regards,
PRINTER DOT COM

Feb 20, 2008 | Canon PIXMA MP160 All-In-One InkJet...

1 Answer

Canon Pixma MP160 printing problem


Hi I hate to be a pest but can anybody tell me how to fix a scanner error when I turn on the MP180 printer the alarm light comes on and the i get the scanner message regards Ted

Feb 18, 2008 | Canon PIXMA MP160 All-In-One InkJet...

8 Answers

E5 and 2,114,0 errors on Canon MP160


I got this Error 2,114,0 with my MP210 and none of the above fixes worked. This is how I have got it working again: Press and hold the maintenance (picure of spanner and screw driver) button and the reset button ( Inverted red triangle) together for five seconds or more. The flashing error code 1 and 6 will then stop flashing and replaced by a print copy no 1. The printer/scanner is reset and the scanner works.

Feb 12, 2008 | Canon PIXMA MP160 All-In-One InkJet...

Not finding what you are looking for?
Canon PIXMA MP210 Photo All-In-One Printer Logo

5,355 people viewed this question

Ask a Question

Usually answered in minutes!

Top Canon Printers & Copiers Experts

kakima

Level 3 Expert

96576 Answers

old marine
old marine

Level 3 Expert

1472 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Are you a Canon Printer and Copier Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...