Question about KLH KL2400 Tuner

1 Answer

Volume out of speakers nill

I just picked up a used kl-2400, and after hooking it up to some speakers, it produces virtually no sound. It seems almost like theres a setting where the volume was lowered within the menu, but I cant figure anything out.

Posted by on

  • Anonymous Nov 01, 2008

    When hooked up to speakers there is no sound. I have tested the speakers with another stereo and they work. U plug in headphones and they work. But I can not get sound through the speakers.

  • oradba Nov 30, 2008

    I get sound from the left side, but none from the right. I have tried different speakers and different connections (banana plugs or a straight wire connection).

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 1 Answer

I bought two of these in "non working" condidition. All it was is this: There are two plug-in's or shunt's whatever you wanna call them that come pre-installed on my units that were up/down and should have been horizontal in block marked "speaker output".
Both unit's work fine now. Came from factory that way!
Try it and let me know at kyhillbilly@bellsouth.net
Someone

Posted on Feb 04, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2011 street glide no sound out of speakers


Hi Anonymous, for more information about your question please visit the websites below. Good luck and have nice day.
Advanced Audio System

Feb 20, 2013 | Harley Davidson Motorcycles

1 Answer

How can i hook up surround sound without an actual sound system?


You can draw up a chart to show where the speakers would go.
Use some imagination and go into detail .
When watching a movie on the virtual surround system , pretend to adjust the volume of each of the 5.1 ( or is your system a premium 7.1?) channels to suite your audio needs.

Use small cardboard boxes and draw speakers on them... some of Moms thread , or some old kite string will do for wires too!
Be carefull not to cross the wires (string) or you may cause a short in the system and blow out your nice new system!

Sep 28, 2011 | Audio Players & Recorders

1 Answer

The volume knob from my right computer part Rev A00 broke off. Computer model Dell dimension 2400. Can I get a replacement knob and where?


Sounds like you broke the volume control knob for your speakers (Likely A215s)
Best bet, new pair of speakers as they don't sell replacement parts for the speakers themselves

Apr 24, 2010 | Dell Dimension 2400 PC Desktop

1 Answer

My Dell AS501 does not produces sound. I have


make sure the power is hooked to the back of the monitor, and that the speakers are hooked into it. make sure it is switched on and volume is at 50% or higher. if it still doesnt work, try hooking an mp3 player to the speaker jack. if they work, its the computer. if it doesnt work, replace the speakers.

Dec 12, 2009 | Dell AS500 Sound Bar Computer Speakers

1 Answer

Speaker produces sound even when the zone is off


Since the Pyle speaker is a 4 ohm device, it's likely that when you have other zones on, the change in the impedance will affect the volume. Check to see what impedance your other speakers are (standard is usually 8 ohm), and if your tuner has impedance matching for your zones. If it does not, that's most likely your issue. You could get an impedance matching transformer at Radio Shack to resolve this issue. Please rate my solution, thanks.

Apr 17, 2009 | Pyle PWRC82 Main / Stereo Speaker

1 Answer

BA735nalog


most probably a connection problem

Dec 18, 2008 | Boston Acoustics BA735 Computer Speakers

1 Answer

I've hooked up my LG 47" 1080p widescreen to a LG HE903PAW audio receiver / 5 disc dvd player with upscaling capabilities. I have tested the speaker system and everything's connected properly....


I was talking with LG on virtually the same problem. I have a samsung blu-ray player hooked up via HDMI. Even though the blu-ray is outputting 5.1, 6.1 or 7.1, the LG is only outputting 2 channel unless you switch to pro logic. LG states that this is a known problem and that you are to return the system to where you bought it for a replacement. Call the 1-800 number and they should give you the same answer.

Nov 23, 2008 | Audio Players & Recorders

1 Answer

Rear speakers no sound


you have to have it set to one of the sound settings to get surround sound , and if what you have hooked up does not have a digital connection ( optical or coax) you can not get dolby digital surround either
if it is the stereo your listening to then set a sound to get virtual surround sound ( unless you have a digital tuner that supports digital signal input

Oct 26, 2008 | Audio Players & Recorders

Not finding what you are looking for?
KLH KL2400 Tuner Logo

Related Topics:

289 people viewed this question

Ask a Question

Usually answered in minutes!

Top KLH Audio Players & Recorders Experts

 Grubhead
Grubhead

Level 3 Expert

4872 Answers

The Knight
The Knight

Level 3 Expert

72670 Answers

Electro Med Services...
Electro Med Services...

Level 3 Expert

6694 Answers

Are you a KLH Audio Player and Recorder Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...