- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
You may have the volume on your invoca set too high and it is picking up speech from the television and misinterpreting it as commands. Check the mic level in your battery compartment and mess with the levels so that it still listens to you, but not the tv :) You can find the manual here and check pages 53 and 58 for better views :) Let me know if this doesn't help. You may have to move the invoca unit itself to a new location that isn't in the "main blast" of the tv speakers. Best of luck mate! Cheers!
You need to put a small shield around you receiving diode lens on the TV, you will have to be right on target now, and unless you align it straight on, exactly, you will not be able to change channels. So will no-one else... So we used to use an old plastic film container, cardboard etc, make a small shield and glue it tape it to the TV. So the "Eye" is down in the shield.. now that should stop any errant signals from interfering.
just press your setup button untill the red light stays on then hit TV or what ever your trying to program then keep clicking channel up until the channel changes and once it changes hit enter or setup button
hold down code until it stays lit, then press tv then keep hitting channel up or channel down (either one can be used, keep pressing channel button til tv changes channels when it does press enter, or ok if enter is not there, it may take awhile maybe a few channel pushes up to 200 and up times, you use this method when you don't know the code for your tv. Hope this helps.
Have a solution for you.Turn your TV on then Press and hold 'P' on remote until light stays on. Press device to be controlled (TV/Cable) light will flicker but stay on. Now keep pressing channel up (up to 300 times) until device changes channel. Then press Enter to save code. Hope this helps
you need to program your remote control. take the battaries out. and maually turn the tv on. then hit the source you want to view. for example, I want to control the tv set. I push, code search and hold it then push the source button and then release the source button and then release the code search button. now, aim at the tv and then keep pressing power button till it goes off. when the tv is off, hit return or set or something like that.( every remote has different calling for it but still the same function) it should work. try it and let me know.