Question about Panasonic PT-AE900U Multimedia Projector

Open Question

After 600 lamp hours, my lamp started going dim and now doesn't come on. When I turn on the projector, the green light flashes for 30 seconds or so and then turns orange and the lamp light flashes red. I can't determine if it is the lamp or the iris issue based on searches. I replaced the lamp 4 months ago.

Posted by on

Ad

5 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad
jyackle5
  • 8197 Answers

SOURCE: PT-AE700U Lamp led flashes red

Reset the lamp hours. Here is the manual on how to reset lamp time.

http://www.projectorcentral.com/pdf/projector_manual_2606.pdf

Good Luck and Please Rate Fixya!

Posted on Mar 12, 2009

Ad
  • 1 Answer

SOURCE: Nothing comes on except the green standby light on PT-AE900E.

I have the same problem. It seems we have to reset the counter. This reset must be done via the beamer itself and not via remote control, since lamp is not working...

Posted on Nov 28, 2009

  • 1 Answer

SOURCE: Panasonic PT-LB10SVU green light flashing,then orange,lamp light

i just replace the lamp, and don't have any light coming from lens,starting green (after a few seconds,green become to flash2_bing.gif), then turning on orange and lamp light flashing...please i need help, fan working perfect...i don't have a remote,is a problem, or not

Posted on May 03, 2010

  • 12 Answers

SOURCE: I seem to have the dynamic iris problem but the lubrication didn't help

You ask the seller, because the product is for them, they know how to deal with the problem. You can also read the instruction.


PANASONIC Lumix DMC-FZ50 Charger
PANASONIC DMW-BMB9E battery

Posted on Oct 26, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Lamp doesn't turn on


BenQ warrants their lamps at 500 hours...I had one go at 420 hours for my projectors, had to contact the company for a return number and pay to ship the entire unit back to them, then they sent me my unit back with a new bulb installed. Process took about a month.

Dec 17, 2012 | BenQ MS510 3D Projector

1 Answer

Epson PowerLite 410W projector (used for a smart board in a classroom) won't project anything or even turn on. Power button (maybe lamp indicator light? I don't really know anything about this...)...


It seems you assume that it is not an overheating problem.
The problem is, the bulb gets really, really hot when using the projector. It doesn't matter whether it has been there without any usage. As you switch it on, it will start to get hot.
But the lamp or other parts of the projector should not get too hot. To control the temperature, air is moved through the projector with the help of fans. Air enters through air filters and move through the projector absorbing heat from hot parts. This prevents these parts from getting overheated.
But what if air doesn't flow freely? Then the parts CAN get overheated.
First, switch on the projector and check whether you can hear the fans working.
Next, switch off the projector and remove power cable.
After about 30 minutes, remove the cover and check whether the air filters are blocked. If they are, clean them with a small brush.
This would probably solve your problem.

Sep 23, 2011 | Epson PowerLite 410W LCD Projector

1 Answer

Hi I have a Sanyo PLC-XP18 projector and it has recently developed a problem. I was watching a film the other night and the projector just cut out. Now when i try and turn the projector on the the fans...


READY light is green when the projector is ready to be switched on
LAMP is dim when the projector is ON, but goes bright when it reverts to STANDBY.

Check that the lamp cover is fully down and the cover switch is activated

Feb 28, 2011 | Sanyo PLC XP18 Multimedia Projector

1 Answer

No lamp and a flashing red status light


The lamp has run out of its operating hours which is normally 3000 hrs. Replace the lamp and you will be alright.

May 28, 2009 | NEC VT465 Multimedia Projector

1 Answer

Panasonic PT-LB10SVU green light flashing,then orange,lamp light


i just replace the lamp, and don't have any light coming from lens,starting green (after a few seconds,green become to flash2_bing.gif), then turning on orange and lamp light flashing...please i need help, fan working perfect...i don't have a remote,is a problem, or not

Feb 25, 2009 | Panasonic PT-LB10SVU Multimedia Projector

2 Answers

No light come on from the projector


Thats the projector telling you that you need to replace the lamp. Lamps usually lasts for about 2000 hours so if you had it for a while you may need to replace it.

www.froogle.com and enter your make and model or go to www.projectorcentral.com and find a few retailers in the US that sells lamps.

good luck

smeags

Jan 02, 2008 | Hitachi CP-X260 LCD Projector

3 Answers

Lamp


red light indicates lamp is expired. even though you get temporary light, the lamp is shot. Try BULBMAN.COM for a new lamp.

Sep 25, 2007 | Toshiba TDP-S20U Multimedia Projector

1 Answer

Won't turn on, only flashes red light


Probably the filter is blocked. Unplug the power lead at the back and leave for about 30 seconds. Plug back in and it should work. The first opportunity you get, buy some compressed air and give it a good clean.

May 07, 2007 | Epson PowerLite 50c Multimedia Projector

Not finding what you are looking for?
Panasonic PT-AE900U Multimedia Projector Logo

Related Topics:

28 people viewed this question

Ask a Question

Usually answered in minutes!

Top Panasonic Office Equipment & Supplies Experts

Norman  J Weimar Jr
Norman J Weimar Jr

Level 3 Expert

6696 Answers

jasbo
jasbo

Level 3 Expert

2237 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

Are you a Panasonic Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...