The red flashing light blinks constantly regardless if a message is on the phone. How can I change to show only when I have a message?

Constant red means it is set and ready to record messages after x amount of rings. Flashing red means you have a message.

Please always include the model number is such questions and I can find you a manual. Polycom has lots!

https://www.google.com/search?q=Polycom+phone+manual

..

The pulsing dial tone usually indicates a message on the service provider's server, not on your phone. Contact your provider to find the procedure to access these messages.

Yellow light constantly blinks on top of all the cordless phones

www.faqqq.com/.../yellow-light-constantly-blinks-on-top-of-all-the-cord...

Question Product: Panasonic KX-TG5432 Digital Dual Cordless Telephone Question Details: Yellow light constantly blinks on top of all the cordless phones The.

Panasonic KX-TGP550 Normal Status Lights

www.statuslights.com/panasonic/panasonic-kx-tgp550.html

Red (Rapidly Flashing), The Base Unit is paging handsets. (KX-TGP-500 only). Amber(Solid), The Base Unit's IP address may conflict with the IP addresses of ..

Panasonic DLP TV Bulbs

Make sure its an original Osram or Philips bulb inside the housing. If its a cheap lamp it will act this way. If it is an original lamp, then you may have a power supply issue. It shouldn't affect your TV but you may want to try resetting the lamp timer by following the instructions that came with the lamp.

TY-LA1001 Timer reset

While pressing the VOL- button on the projection display, hold down the number 0 button on the remote control at the same time for more than 5 seconds.

Hi , First of all, Level 1 Notifications are sent to the smartphone to indicate when important or urgent messages are sent. To disable this or turn off,
Depending on the phone you are using: (the steps below are for Blackberry)

1. Go to your RingTone Profile setting (the one where you change what kind of ring/vibrate that you want)
2. Scroll down and click on Advanced
3. Click into your Ringtone Profile
4. Click on "Level 1 Messages"
5. Click on "Repeat Notification" and change it from "LED Flashing" to "none"
6. (Make sure that you do it for what is called "In Holster" and "Out of Holster")

Hope this helps. On another note; sometime, when you delete a call while the missed call is Bolded... the red light will continue to flash. What happened was, the link between the light and the deleted call has unsynchronized and therefore caused the red light to constantly blink. There is one way to restore it back to normal, but no guaratees.... place another voice call to yourself, (use a landline phone to make the call to your mobile). Let the call complete and have it show up as missed. Go into your missed calls and click on it to change the status to "read". It should restore back to a green flashing light. IF not, you have to either wait 10 mins for it to stop, or pull the battery out to soft reset the device back to normal operation.

The message counter will blink until the first time you
press "Play" ( yes, even when there is nothing ( 0 ) to
listen to ).

Actually, this blinking serves the real function of alerting
you to the fact that power was off/interrupted and now
the clock (Time and Day) will need to be reset.

Good luck!

Our just started to do the same thing. Drove us crazy because there were no messages. I couldn't find the manual so I looked up the manual on their website. Here's how to fix it....IT WORKS! With the phone in "stand by", open the menu and select Global Setup.Select VMWI reset. Then select yes.

The flashing means that the toner and/or the imaging drum is empty or missing (printing halts on these errors). Lights on steady means low toner.

press #409 to cancel message receive
press #64 follow by et\xtn on display to cancel sent message

mayb st 21 been assigned, but no body know.to check, call from all extn to displayed phone.check 1 by 1.
if light keep blinking for mic, try to change other key phone