Question about Western Digital 500GB My Book World Edition 500 GB Hard Drive

3 Answers

Mionet is not showing up

Mybook is active, can connect to the shared folders by windows explorer, but mionet is not coming up. the main mionet homepage is gone. I have all the necessary processes running, changed firewall settings but nothing. I tried an un-install, but nothing. I know that Mionet software is really bad, but unfortunately all my data is not on a shared folder yet on mybook, so I cannot access anything for the moment

Posted by on

3 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 2,071 Answers

You better use a program called Disk-Genius. this is partitioning software. if your drive, is recognised by the system.
you need to go into the bios, disconnect any other hard drives. and boot from cd drive, with disk genius. Or similar.

hope this may help;

Regards,
VOTIT

Posted on Aug 21, 2008

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 6,487 Answers

I don't think you can access private files without Mionet. You need their authentication/authorization service to access your own drive, You cannot access these services without their infrastructure. You can still access public files through the drivename or IP.

Hope that helps.....

Posted on Aug 21, 2008

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Master:

    An expert who has achieved Level 3.

  • Master
  • 521 Answers

Was this working before.or just after installing it is not working.

Posted on Aug 21, 2008

  • tech expert12 Aug 21, 2008

    make it online in the properties of it.it must be in your control pannel.go to the mionet .click properties and there click the offline tickmark ,and it will become online.thats it.

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Can't manage MyBookWorld 1tb we (blue rings)


The issue you are experiencing is an error on our servers. Our next version of MioNet should prevent and resolve the issue, but in the meantime you must complete the following steps to regain remote access to your My Book World (blue rings):

To create a new MioNet account, please use the following instructions:

Part A. Reset MioNet/Anywhere Access

1. Please open your web browsers and enter (without the quotes) "http://<IP address of My Book World>" or "http://mybookworld" in the address bar. The Shared Storage Manager web page will appear. The username and password it requests will be the same as your MioNet username, and the original password used for MioNet (if you changed your password on our website, it does not update the My Book World).

2. Once you have accessed the Western Digital Shared Storage Manager please select "General Setup", then choose "WD Anywhere Access settings". On the following page you will have three buttons to select: please click on the "Stop" button, wait until WD Anywhere Access status goes to "Inactive", then click the "Reset" button. Once the WD Anywhere Access Status goes to "Not Registered," (on older firmware, it will go back to Active), the My Book World has been properly reset. This will return the MioNet software on the My Book World to default settings. It will not harm your stored files.

Part B. Uninstall and Reinstall MioNet (on a computer located on the same network as My Book World)

1. Uninstall MioNet from one of your computers.
2. Insert your Western Digital installation disk or download MioNet from http://www.mionet.com/mbvista and launch the MioNet installer.

NOTE: You must use the installation disk or the link above to create your new account. Certain functionality related to the My Book World is related to the installer you use to register a new MioNet account. Failure to use the proper installer may result in the need to repeat this process.

3. Register as a new user. You will need to specify a new username and E-Mail address.
4. During the installation, MioNet should detect the now reset My Book World. Please add it to your new account.

Part C. Uninstall and Reinstall MioNet on your other computers

1. Uninstall MioNet from your other computers.
2. Install MioNet using the Western Digital installation disk or downloaded from MioNet from http://www.mionet.com/mbvista and launch the MioNet installer.
3. Register as a current user with your new account's information.

Please let us know what your new account name is and we will follow-up with additional information. We will also send you instructions on how to reset that account's password.

Aug 21, 2009 | Western Digital 500GB My Book World...

1 Answer

Mionet problem


Your account has something called "account bug"
You will need to reinstall MioNet on all computers, reset the My Book World, then attach it to your new MioNet account. You'll need to download the Blue-Ring My Book World version of MioNet here:
http://www.MioNet.com/mbvista
Then, to attach your My Book World to the new MioNet account (just select a new username when you re-install MioNet), follow these directions:

1. Turn off My Book World
2. Identify the reset button on the back of My Book World
3. Depress the reset button while restarting My Book World
4. Keep the reset button depressed for about 10 seconds after you see blue lights on My Book World

You should now be able to sign in to the Shared Storage Manager as admin/123456.

5. Please open your web browsers and enter (without the quotes) "http://<IP address of My Book World>" or "http://mybookworld" in the address bar. The Shared Storage Manager web page will appear.
6. Once you have accessed the Western Digital Shared Storage Manager please select "General Setup" then choose "WD Anywhere Access settings." Use the default username of "admin" and default password of "123456" (without the quotes). On the following page you will have three buttons to select, please click on the "Reset" button. This will return the MioNet software on My Book World to default settings.
7. From within the MioNet Client, go to File > Remove Computer. Locate the My Book World (WDStorage, MyBookWorld, or whatever you named it) and remove it.
8. If you do not see a new window from MioNet informing you that you have a storage device available, "Scan for Cameras and New Devices…" to detect the unit.

Jul 16, 2009 | Western Digital 500GB My Book World...

1 Answer

Can't Access to MioNet, Can't access to WD Drive


It's a MioNet issue -- if you create a new MioNet account and reset the WD Anywhere Access/MioNet settings on the My Book World (accessible from the drive's interface on its http://ip or http://name address), you'll be able to access the drive again.

So here're your steps:

1. Reset the My Book World's MioNet settings (there's a reset button within the interface)
2. Uninstall MioNet (restart when it tells you to)
3. Re-install MioNet from the CD that came with your drive (restart again when it tells you to)

During this process it should find your My Book World and ask you to give it a name. Once you have completed the process, you should see the My Book World once again in your MioNet interface and be able to see the folders that are only visible when MioNet is running.

If you have any questions or want to speak with a MioNet Tech (I am one of them, my name is Laura), call our WD number at 1-800-275-4932 and tell them you have "Account Bug"

Jun 01, 2009 | Western Digital 500GB My Book World...

2 Answers

I have a world book 1tb hd with mionet. connec to network


hard drive is hanging up continually have to p[lug in and unplug in order for me to transfer everything off of it!

Dec 11, 2008 | Western Digital 500GB My Book World...

1 Answer

Mionet problem


The issue you are experiencing is account bug. You must reinstall MioNet and create a new MioNet account, then attach the My Book World to the new account. You will then regain your MioNet access.
http://www.MioNet.com/mbvista -- this is the download installer for MioNet which works for blue-ring My Book Worlds. The White-Light My Book World requires different software.

To create a new MioNet account, please use the following instructions:

Part A. Reset MioNet/Anywhere Access

1. Please open your web browsers and enter (without the quotes) "http://<IP address of My Book World>" or "http://mybookworld" in the address bar. The Shared Storage Manager web page will appear. The username and password it requests will be the same as your MioNet username, and the original password used for MioNet (if you changed your password on our website, it does not update the My Book World).

2. Once you have accessed the Western Digital Shared Storage Manager please select "General Setup", then choose "WD Anywhere Access settings". On the following page you will have three buttons to select: please click on the "Stop" button, wait until WD Anywhere Access status goes to "Inactive", then click the "Reset" button. Once the WD Anywhere Access Status goes to "Not Registered," (on older firmware, it will go back to Active), the My Book World has been properly reset. This will return the MioNet software on the My Book World to default settings. It will not harm your stored files.

Part B. Uninstall and Reinstall MioNet (on a computer located on the same network as My Book World)

1. Uninstall MioNet from one of your computers.
2. Insert your Western Digital installation disk or download MioNet from http://www.mionet.com/mbvista and launch the MioNet installer.

NOTE: You must use the installation disk or the link above to create your new account. Certain functionality related to the My Book World is related to the installer you use to register a new MioNet account. Failure to use the proper installer may result in the need to repeat this process.

3. Register as a new user. You will need to specify a new username and E-Mail address.
4. During the installation, MioNet should detect the now reset My Book World. Please add it to your new account.

Part C. Uninstall and Reinstall MioNet on your other computers

1. Uninstall MioNet from your other computers.
2. Install MioNet using the Western Digital installation disk or downloaded from MioNet from http://www.mionet.com/mbvista and launch the MioNet installer.
3. Register as a current user with your new account's information.

Please let us know what your new account name is and we will follow-up with additional information. We will also send you instructions on how to reset that account's password.

Oct 08, 2008 | Western Digital My Book Essential Edition...

1 Answer

Computer won't start after installing MioNet


What type of Internet Security are you using?

1. Go to Start > Control Panel > Network Connections (In Vista, you must go to Start > Control Panel > Network and Sharing Center > Manage Network Connections)
2. Right-click on your Local Area Connection, and go to "Properties"

In the list of devices installed, if your Internet Security company has installed a Packet Filter on your computer, you should see listed within there something such as "Anti-Virus NDIS Filter" or "Firewall Filter" -- something with a "Filter" in it, or even just the name of your Internet Security's company.

To remove it, perform the following:

3. Select the Filter, then click the button below that says "Uninstall"
4. Restart your computer in Normal Windows Mode.

You may see the WinPK Filter Driver listed in this window; if you do, please do not remove it -- this is part of MioNet. However, the driver should only appear in this list under the Windows Vista operating system, not the Windows XP operating system.

Please let us know if this information has been useful.

Aug 05, 2008 | Western Digital My Book Essential Edition...

4 Answers

Mionet is not showing up after login


Go into task manager, kill all Mionet processes. Then start it again from the start menu. You should now have access.

Yes it's the Mionet software....it's rubbish.

May 17, 2008 | Western Digital 500GB My Book World...

5 Answers

I cannot access western digital 1000 gb


Here is a tedious solution that works. Use MioNet and move all the files you want to keep to another drive or another computer, then delete everything from the MyBookWorld. Remove MioNet from all computers. Next access the drive's built in Shared Storage Manager with a web browser. Check the pdf manual on the install disk to find out how. Create a new shared folder and then move everything you want on the drive into the new folder WITHOUT using MioNet. Map the shared folder as a network drive for easy access. Never, ever, EVER use MioNet again and all should be good. The drive works, the MioNet software does not.

Feb 19, 2008 | Western Digital 500GB My Book World...

1 Answer

WD MYBOOK


Both the remote computer and local computer need to be on the same LAN . Also, remember, MioNet can only grant access to computers that are on and connected to the Internet.

The (My Resource tab) allows access to your personal data on any computer.

The (Shared with Me tab) allows you to view files shared by others.

The (Shared with Others tab) allows you to start sharing your own folders and webcams with others.

Feb 08, 2008 | Western Digital My Book Essential Edition...

2 Answers

Can't access my share folders


Drive management show only safely remove usb drive.
When u use mionet software it map the share to a drive letter. If u create folder or files on that drive u dont have permission to chance those files or folders on \\mybookworld.
Solution, dont use mionet software.

Nov 12, 2007 | Western Digital 500GB My Book World...

Not finding what you are looking for?
Western Digital 500GB My Book World Edition 500 GB Hard Drive Logo

308 people viewed this question

Ask a Question

Usually answered in minutes!

Top Western Digital Computers & Internet Experts

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers

Mark Taylor
Mark Taylor

Level 3 Expert

728 Answers

yadayada
yadayada

Level 3 Expert

63801 Answers

Are you a Western Digital Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...